Opens in a new tab

XC7Z010-1CLG400I

Zynq-7000 SoC, dual A9 @ 667MHz + 28K LC FPGA, 240 DSP, 4.9Mb BRAM, CLG400 industrial

800

Effective Inventory

Image for reference only

Manufacturer Part:

XC7Z010-1CLG400I

Package:

CLG400 (400-ball BGA, 17x17mm, 0.8mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The XC7Z010-1CLG400I from AMD (formerly Xilinx) is a Zynq-7000 SoC integrating a dual-core ARM Cortex-A9 MPCore processor with Artix-7 FPGA fabric (28K logic cells, 240 DSP slices) in a single device. The CLG400 package provides 400-ball BGA with industrial temperature range, enabling high-performance embedded processing and programmable logic integration.

Key Specifications

  • Processor: Dual-core ARM Cortex-A9 MPCore @ 667MHz (speed grade -1)
  • FPGA Fabric: Artix-7 based, 28K logic cells
  • Look-Up Tables (LUTs): 17,600
  • Flip-Flops: 35,200
  • DSP Slices: 240 (25×18 multiplier + 48-bit accumulator)
  • Block RAM: 240 x 36Kb = 4.9Mb (630KB)
  • Processor Memory: 256KB on-chip SRAM (128KB L2 + 128KB OCM)
  • PS Peripherals: 2x GigE, 2x USB 2.0 OTG, 2x CAN, 2x SDIO, 2x SPI, 2x I2C, 2x UART, GPIO
  • PS DDR: DDR3/DDR3L/DDR2 controller (16/32-bit)
  • PS-PL Interface: 4x 32-bit AXI master, 4x 32-bit AXI slave
  • High-Speed I/O: 4x GTP transceivers (up to 6.6 Gbps)
  • PL I/O: Up to 150 HP I/O pins
  • Speed Grade: -1 (slowest, lowest power)
  • Supply: PS 1.0V (core), PL 1.0V (core), 1.8V/2.5V/3.3V (I/O)
  • Operating Temperature: -40°C ~ 100°C (industrial)
  • Package: CLG400 (400-ball BGA, 17x17mm, 0.8mm pitch)

Features

  • Integrated ARM Cortex-A9 + FPGA in a single device
  • Coherent SMP dual-core A9 with NEON FPU
  • High-bandwidth PS-PL AXI interconnect
  • 240 DSP slices for signal processing acceleration
  • 4.9Mb block RAM for data buffering
  • 4 GTP serial transceivers for high-speed communication
  • Linux and RTOS support on processor
  • Vivado and PetaLinux development tools

Applications

  • Industrial motor control and PLC
  • Software-defined radio (SDR)
  • Machine vision and image processing
  • Automotive advanced driver assistance (ADAS)
  • Network appliance and packet processing
Product Introduction: XC7Z010-1CLG400I Product Introduction

The XC7Z010-1CLG400I from AMD (Xilinx) is the entry-level member of the Zynq-7000 SoC family, combining a dual-core ARM Cortex-A9 MPCore processing system (PS) with an Artix-7 programmable logic (PL) fabric in a single chip. The PS provides the software programmability of a standard ARM processor running Linux or RTOS, while the PL delivers the hardware-level parallelism and deterministic timing of an FPGA. The high-bandwidth AXI interconnect between PS and PL enables the ARM cores to offload compute-intensive tasks such as DSP filtering, protocol handling, and real-time control to custom hardware accelerators in the PL. With 28K logic cells, 240 DSP slices, and 4.9Mb of block RAM, the XC7Z010 has sufficient resources for mid-range signal processing and control applications. The -1 speed grade is the lowest power option, and the I suffix indicates industrial temperature range.

Working Principle: XC7Z010-1CLG400I Working Principle

The XC7Z010 integrates two distinct processing domains connected by a high-bandwidth AMBA AXI interconnect. The Processing System (PS) contains two ARM Cortex-A9 cores with L1 caches (32KB I + 32KB D each), a shared 512KB L2 cache, 256KB of on-chip memory (OCM), a DDR3 memory controller, and standard peripherals (GigE, USB, CAN, SDIO, SPI, I2C, UART). The Programmable Logic (PL) is an Artix-7 FPGA fabric containing CLB (configurable logic blocks with 6-input LUTs and flip-flops), DSP48E1 slices (25×18 multiplier + 48-bit accumulator + 48-bit adder), block RAM (36Kb dual-port), and GTP transceivers. The PS-PL interface provides 4 AXI master ports from PL to PS, 4 AXI slave ports from PS to PL, plus general-purpose and high-performance ports, enabling data transfer at multiple GB/s. Software running on the ARM cores configures the PL through the PCAP (processor configuration access port), and then communicates with hardware accelerators through memory-mapped AXI transactions.

Pin Description: XC7Z010-1CLG400I Pin Definition and Functions
Pin Group Count Function
PS MIO ~54 Multiplexed I/O for PS peripherals
PL HP I/O ~150 High-performance FPGA I/O (1.8/2.5/3.3V)
GTP 4 pairs High-speed serial transceivers (TX/RX)
PS DDR ~40 DDR3 memory interface (16/32-bit)
Power ~80 VCCINT (1.0V), VCCAUX, VCCO, VCCPLL
JTAG/Config 5 TCK, TMS, TDI, TDO, PROGRAM_B
Clock 4 PS_CLK (33.33MHz), PL clock capable pins
Application Scenarios: In which products and applications is XC7Z010-1CLG400I used

The XC7Z010-1CLG400I is used in industrial control systems where the ARM cores run Linux with networking stacks while the PL implements real-time motor control loops with sub-microsecond latency. In software-defined radio, the GTP transceivers receive high-speed ADC data, the PL performs digital down-conversion and filtering, and the ARM cores handle the protocol stack. For machine vision, the PL accelerates image processing algorithms (edge detection, feature extraction) while the ARM runs OpenCV and neural network inference. The CLG400 package is compact enough for space-constrained embedded modules while providing sufficient I/O for most mid-range applications.

Alternative Models: What chips are recommended as replacements for XC7Z010-1CLG400I
Model Manufacturer Key Difference
XC7Z020-1CLG400I AMD/Xilinx 53K LC, 630KB BRAM, 600 DSP, same package
XC7Z007S-1CLG225I AMD/Xilinx Single A9, 23K LC, smaller 225-ball BGA
5CEFA9F23I7N Intel Cyclone V SoC, 110K LE, dual A9, F23 package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1