Opens in a new tab

SMBJ60A-13-F

600W bidirectional TVS, 60V standoff, 96.8V clamp, 5µA leakage, SMB (DO-214AA)

13500

Effective Inventory

Image for reference only

Manufacturer Part:

SMBJ60A-13-F

Package:

SMB (DO-214AA)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMBJ60A-13-F from Diodes Incorporated (also ON Semiconductor variant) is a 600W peak pulse power bidirectional TVS (Transient Voltage Suppressor) diode with 60V standoff voltage, 66.7V minimum breakdown, and 96.8V maximum clamping voltage at 10/1000µs waveform in an SMB (DO-214AA) surface-mount package.

Key Specifications

  • Type: Bidirectional TVS (Transzorbid)
  • Standoff Voltage (VRM): 60V
  • Breakdown Voltage (VBR): 66.7V min, 73.9V max @ 1mA
  • Clamping Voltage (VCL): 96.8V max @ IPP=6.2A
  • Peak Pulse Power (PPP): 600W (10/1000µs)
  • Peak Pulse Current (IPP): 6.2A
  • Leakage Current (IR): 5µA max @ VRM
  • Capacitance: <1000pF typical @ VRM
  • Operating Temperature: -55°C ~ +150°C
  • Package: SMB (DO-214AA)
  • Reverse Standoff: ±60V (bidirectional)
  • Response Time: Typically <1ps (clamping)
  • Polarity: Bidirectional (A suffix)

Features

  • 600W peak pulse power dissipation
  • Bidirectional protection for AC and symmetrical signals
  • Low 5µA leakage current at standoff
  • Fast response time (<1ps)
  • SMB package for compact surface-mount design
  • IEC 61000-4-2 ESD protection compliant
  • RoHS compliant

Applications

  • Power line surge protection
  • Telecom line protection
  • Industrial I/O protection
  • RS-485/RS-422 bus protection
  • Automotive load dump protection
Product Introduction: SMBJ60A-13-F Product Introduction

The SMBJ60A-13-F is a 600W bidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronics from voltage transients caused by lightning, ESD, and electrical fast transients. The 60V standoff voltage makes it suitable for protecting 48V telecom and industrial power rails, as well as 24V and 36V bus systems with adequate margin. The bidirectional configuration (A suffix) provides symmetrical clamping for both positive and negative transients, making it ideal for AC power lines and differential signal buses. The SMB (DO-214AA) package provides a compact footprint with adequate power dissipation capability for most board-level surge protection requirements. The -13-F suffix indicates Diodes Incorporated’s tape and reel packaging with RoHS compliance.

Working Principle: SMBJ60A-13-F Working Principle

The SMBJ60A-13-F operates as an avalanche breakdown device. Under normal operating conditions, when the voltage across the device is within ±60V (the standoff voltage), the TVS presents high impedance with only 5µA maximum leakage current, appearing transparent to the protected circuit. When a transient voltage exceeds the breakdown voltage (66.7V minimum), the device enters avalanche breakdown, conducting heavily and clamping the voltage to a safe level. For a 600W peak pulse (10/1000µs waveform), the peak current is 6.2A and the clamping voltage is 96.8V maximum. The bidirectional structure consists of two back-to-back avalanche diodes in a single package, providing identical protection for both polarity transients. The clamping response time is typically sub-picosecond, as the avalanche breakdown mechanism is fundamentally faster than gas discharge or mechanical suppression devices.

Pin Description: SMBJ60A-13-F Pin Definition and Functions
Pin Name Function
1 Cathode/Anode Bidirectional terminal 1 (no polarity for bidirectional)
2 Anode/Cathode Bidirectional terminal 2 (no polarity for bidirectional)
Application Scenarios: In which products and applications is SMBJ60A-13-F used

The SMBJ60A-13-F protects 48V telecom power rails from lightning-induced surges and central office battery transients. For RS-485/RS-422 differential buses in industrial environments, the bidirectional clamping protects against both common-mode and differential surges. In automotive applications, it provides load dump protection for 24V and 36V vehicle electrical systems. On AC power lines, the bidirectional configuration clamps both half-cycles of surge transients. The low 5µA leakage ensures minimal impact on the protected circuit’s DC operating point.

Alternative Models: What chips are recommended as replacements for SMBJ60A-13-F
Model Manufacturer Key Difference
SMBJ60A-13-F Diodes Inc Same part, different manufacturer code
SMBJ60CA Littelfuse Same 600W bidirectional, 64.4V VBR
SMBJ58A ON Semiconductor 58V standoff, slightly lower voltage

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1