Opens in a new tab

TPS82085SILR

3A high-efficiency step-down converter MicroSiP module with integrated inductor, 2.5-6V input, adjustable 0.8V-VIN output

7008

Effective Inventory

Image for reference only

Manufacturer Part:

TPS82085SILR

Package:

8-uSIL (3.0×2.8×1.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS82085SILR from Texas Instruments is a high-efficiency 3A step-down converter MicroSiP power module with an integrated inductor. Housed in a compact 8-pin uSIL package (3.0mm x 2.8mm x 1.3mm), it combines a synchronous buck converter and inductor in a single device. It operates from a 2.5V to 6V input and delivers an adjustable output from 0.8V to VIN.

Key Specifications

Input Voltage Range 2.5V to 6V
Output Voltage Range 0.8V to VIN (adjustable)
Max Output Current 3A
Switching Frequency 2.4MHz
Quiescent Current 17uA (power save mode)
Efficiency Up to 95%
Package 8-pin uSIL (3.0×2.8×1.3mm)
Operating Temperature -40 to +125 C

Features

  • DCS-Control topology for excellent load transient response
  • Integrated inductor for minimal external components
  • Power save mode with 17uA quiescent current
  • 100% duty cycle for lowest dropout operation
  • Hiccup short-circuit protection and thermal shutdown
  • Power good output and enable pin for sequencing
  • CISPR 11 Class B compliant

Applications

  • Optical modules and fiber optic transceivers
  • Single-board computers and embedded systems
  • Solid-state drives (SSD)
  • Audio/video control systems
  • Low-power RF and radar systems
Product Introduction: TPS82085SILR Product Introduction

The TPS82085SILR is a 3A high-efficiency step-down converter in a MicroSiP power module package with an integrated inductor. Based on TIs DCS-Control topology, it delivers up to 95% efficiency with a 2.4MHz switching frequency. The device supports an input voltage range of 2.5V to 6V and provides an adjustable output from 0.8V to VIN. The integrated inductor eliminates the need for external inductor selection and simplifies PCB layout. The module automatically enters power save mode at light loads, reducing quiescent current to just 17uA. Protection features include hiccup short-circuit protection, thermal shutdown, and undervoltage lockout.

Working Principle: TPS82085SILR Working Principle

The TPS82085SILR employs DCS-Control (Direct Control with Seamless transition into Power Save Mode) topology, which combines the advantages of hysteretic, voltage, and current mode control. In PWM mode, the converter operates at a nominal 2.4MHz switching frequency for medium to heavy loads. As load decreases, the device seamlessly transitions to Power Save Mode (PSM), reducing switching frequency and minimizing quiescent current. The 100% duty cycle mode allows the high-side MOSFET to remain on continuously, minimizing the input-to-output voltage differential. Integrated soft-start prevents excessive inrush current, while the power good (PG) pin provides output voltage monitoring.

Pin Description: TPS82085SILR Pin Definition and Functions
Pin Name Type Description
1 VIN Power Input supply voltage
2 EN Input Enable pin (active high)
3 GND Ground Ground connection
4 FB Input Feedback voltage input
5 PG Output Power good output
6 VOUT Power Output voltage
7 GND Ground Ground connection
8 VIN Power Input supply voltage
Application Scenarios: In which products and applications is TPS82085SILR used
  • Optical module power supply with tight space constraints and high efficiency requirements
  • Portable battery-powered devices needing extended runtime with 17uA quiescent current
  • SSD and storage devices requiring compact, thermally efficient power conversion
  • Industrial control systems with 3.3V or 5V bus input rails
Alternative Models: What chips are recommended as replacements for TPS82085SILR
Model Manufacturer Key Difference
TPS82084SILR TI 2A version, same package
TPS82140SILR TI 1A, smaller solution size
LTM4625 Analog Devices 4A uModule, larger footprint
TPS62088YFP TI 3A, discrete inductor required

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1