Opens in a new tab

BTS50452EKAXUMA1

Dual-channel automotive smart high-side switch, 45mOhm, 3A/ch, PROFET+12V, AEC-Q100, DSO-14

11538

Effective Inventory

Image for reference only

Manufacturer Part:

BTS50452EKAXUMA1

Package:

PG-DSO-14-40-EP (14-SOIC with Exposed Pad, 8.65×3.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTS50452EKAXUMA1 from Infineon Technologies is a dual-channel PROFET+ 12V smart high-side power switch in an automotive-qualified PG-DSO-14 package. Each channel provides 45mOhm on-resistance and 3A nominal load current with comprehensive protection and diagnostic features.

Key Specifications

Channels 2 (dual)
RDS(on) 45mOhm per channel (typ)
Nominal Load Current 3A per channel
Short Circuit Current 25A
Operating Voltage 5V to 28V
Package PG-DSO-14-40-EP
Operating Temperature -40 to +150 C
Qualification AEC-Q100 (automotive)

Features

  • Dual-channel high-side switch with 45mOhm RDS(on)
  • 3.3V and 5V compatible logic inputs
  • Current sense diagnostic output (IS pin)
  • Comprehensive protection: overtemp, overcurrent, short circuit
  • Open-load detection in ON and OFF states
  • ESD protection and reverse polarity capability

Applications

  • Automotive lamp driving (P21W, P27W)
  • LED module driving in automotive
  • Automotive body electronics and ECU
  • Industrial relay replacement
Product Introduction: BTS50452EKAXUMA1 Product Introduction

The BTS50452EKAXUMA1 is a dual-channel smart high-side power switch from Infineons PROFET+ 12V family, designed for automotive lamp and LED driving applications. Each channel features a 45mOhm N-channel vertical power MOSFET with charge pump, providing 3A nominal load current. The device includes comprehensive protection functions including current limitation, overtemperature shutdown with auto-restart, short-circuit protection, and open-load detection. The diagnostic IS pin provides a current proportional to the load current for real-time monitoring. The device is AEC-Q100 qualified and supports 3.3V/5V logic inputs.

Working Principle: BTS50452EKAXUMA1 Working Principle

The BTS50452EKAXUMA1 uses N-channel vertical power MOSFETs with integrated charge pumps for high-side switching. Each channel is independently controlled via logic input pins. The charge pump generates the gate voltage above the supply rail to fully enhance the MOSFET. Current sensing is implemented through a sense FET ratio (kILIS), where a small proportion of the load current is mirrored to the IS pin for diagnostics. The diagnostic enable (DEN) and channel select (DSEL) pins multiplex the sense information. Protection circuits include current limiting, overtemperature detection with hysteresis, and reverse battery protection.

Pin Description: BTS50452EKAXUMA1 Pin Definition and Functions
Pin Name Function
1 OUT0 Channel 0 output
2 VS Supply voltage
3 OUT0 Channel 0 output
4 NC Not connected
5 GND Ground
6 IN0 Channel 0 input
7 DEN Diagnostic enable
8 IS Current sense output
9 DSEL Channel diagnostic select
10 IN1 Channel 1 input
11 NC Not connected
12 VS Supply voltage
13-14 OUT1 Channel 1 output
EP Exposed Pad Thermal pad (GND)
Application Scenarios: In which products and applications is BTS50452EKAXUMA1 used
  • Automotive exterior lighting with current sense diagnostics
  • Automotive body control modules replacing mechanical relays
  • LED module driving with open-load and short-circuit detection
  • Industrial high-side switching with comprehensive fault protection
Alternative Models: What chips are recommended as replacements for BTS50452EKAXUMA1
Model Manufacturer Key Difference
BTS5020-2EKA Infineon Single channel, 20mOhm
VN5E010AHTR-E ST Single channel, 10mOhm
TLE8104E Infineon Quad-channel low-side switches
NCV8402 onsemi Dual high-side, 60mOhm

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1