Opens in a new tab

ESP32-WROOM-32

Dual-core 240MHz Wi-Fi+BT+BLE MCU module, 4MB Flash, 520KB SRAM, 18×25.5mm

13439

Effective Inventory

Image for reference only

Manufacturer Part:

ESP32-WROOM-32

Package:

Module (18 x 25.5 x 3.1mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ESP32-WROOM-32 from Espressif Systems is a powerful Wi-Fi + Bluetooth + BLE MCU module based on the ESP32-D0WDQ6 chip with a dual-core Xtensa LX6 processor running up to 240MHz. It integrates 4MB SPI flash, 520KB SRAM, and a rich peripheral set in a compact 18×25.5mm module with on-board PCB antenna.

Key Specifications

Core Dual-core Xtensa LX6 @ 240MHz
ROM 448KB
SRAM 520KB (+ 8KB RTC SRAM)
Flash 4MB SPI (integrated)
Wi-Fi 802.11 b/g/n, up to 150Mbps
Bluetooth v4.2 BR/EDR + BLE
GPIO Up to 32
ADC 18 channels, 12-bit
Interfaces SPI, I2C, UART, I2S, CAN, PWM
Supply Voltage 3.0V to 3.6V
Operating Temperature -40 to +85 C
Module Size 18 x 25.5 x 3.1mm

Features

  • Dual-core 240MHz processor with 520KB SRAM
  • Wi-Fi 802.11 b/g/n with up to 150Mbps throughput
  • Bluetooth 4.2 BR/EDR and BLE with class-1/2/3 transmitter
  • Capacitive touch sensor inputs
  • Hall effect sensor and temperature sensor
  • Hardware encryption: AES, RSA, ECC, SHA
  • Ultra-low power: deep sleep current < 5uA
  • OTA firmware upgrade support

Applications

  • IoT devices and smart home
  • Wearable electronics
  • Wireless sensor networks
  • Audio streaming and voice encoding
Product Introduction: ESP32-WROOM-32 Product Introduction

The ESP32-WROOM-32 is a powerful, generic Wi-Fi + Bluetooth + BLE MCU module from Espressif Systems targeting a wide variety of applications from low-power sensor networks to demanding tasks such as voice encoding and audio streaming. At its core is the ESP32-D0WDQ6 chip featuring a dual-core Xtensa LX6 processor adjustable from 80MHz to 240MHz with 448KB ROM and 520KB SRAM. The module integrates 4MB SPI flash and a 40MHz crystal oscillator. Wi-Fi supports 802.11 b/g/n up to 150Mbps with 20.5dBm output power, while Bluetooth 4.2 supports BR/EDR and BLE with Class-1/2/3 transmitters. The rich peripheral set includes capacitive touch sensors, SD card host, Ethernet MAC, high-speed SPI, UART, I2S, I2C, and motor control PWM.

Working Principle: ESP32-WROOM-32 Working Principle

The ESP32-WROOM-32 integrates a dual-core Xtensa LX6 processor where each core can be independently controlled and clocked. The Wi-Fi subsystem handles 802.11 b/g/n MAC and baseband processing with a dedicated RF chain operating in the 2.4GHz band. The Bluetooth subsystem supports both classic BR/EDR and BLE with hardware link layer controllers. The GPIO matrix allows flexible peripheral-to-pin mapping. Power management includes multiple sleep modes: active, light sleep, and deep sleep (less than 5uA). The RTC subsystem can operate during deep sleep, enabling wake-up from GPIO, timer, or touch events. Hardware cryptographic accelerators support AES, RSA, ECC, and SHA for secure communication.

Pin Description: ESP32-WROOM-32 Pin Definition and Functions
Pin Name Function
1 GND Ground
2 3V3 3.3V Power supply
3 EN Reset (active low)
4 IO0 GPIO0 / Boot mode select
5 IO1 GPIO1 / TXD0
6 IO2 GPIO2
7 IO3 GPIO3 / RXD0
8-15 IO4-IO12 General purpose I/O
16 IO13 GPIO13 / MOSI
17-23 IO14-IO27 General purpose I/O
24-26 IO32-IO34 GPIO / ADC1 channels
27-28 IO35-IO36 ADC input only pins
29-30 IO39/SENSOR_VN/VP Sensor / ADC inputs
Application Scenarios: In which products and applications is ESP32-WROOM-32 used
  • Smart home devices with Wi-Fi connectivity and BLE beacons
  • Industrial IoT sensor nodes with ultra-low power deep sleep mode
  • Wearable electronics requiring compact wireless MCU with touch sensing
  • Audio streaming applications leveraging I2S and dual-core processing
Alternative Models: What chips are recommended as replacements for ESP32-WROOM-32
Model Manufacturer Key Difference
ESP32-WROOM-32E Espressif Updated version with ESP32-D0WD-V3
ESP32-S3-WROOM-1 Espressif Xtensa LX7, AI acceleration, USB OTG
ESP32-C3-WROOM-02 Espressif RISC-V single core, lower cost
RTL8720DN Realtek Dual-band Wi-Fi + BLE

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1