Opens in a new tab

BMP280

Digital barometric pressure sensor, +/-1hPa accuracy, I2C/SPI, 2.5×2.0mm LGA

6660

Effective Inventory

Image for reference only

Manufacturer Part:

BMP280

Package:

LGA-8 (2.5×2.0x0.95mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BMP280 from Bosch Sensortec (distributed by ROHM) is a digital barometric pressure sensor that can also measure temperature. With a pressure accuracy of +/-1hPa and low power consumption of 2.7uA at 1Hz, it is ideal for altitude tracking and weather monitoring in a compact 2.0×2.5mm LGA package.

Key Specifications

Pressure Range 300 to 1100hPa
Pressure Accuracy +/-1hPa (at 25C, 950-1050hPa)
Temperature Accuracy +/-1.0C (at 25C)
Resolution 0.01hPa (pressure), 0.01C (temp)
Interface I2C (up to 3.4MHz) + SPI (up to 10MHz)
Supply Voltage 1.71V to 3.6V
Current (1Hz) 2.7uA (ultra-low power mode)
Package LGA-8 (2.5×2.0x0.95mm)
Operating Temperature -40 to +85 C

Features

  • High-precision barometric pressure measurement
  • Ultra-low power: 2.7uA at 1Hz in ultra-low power mode
  • Dual interface: I2C and SPI
  • Multiple power modes: sleep, forced, normal
  • On-chip temperature compensation
  • Pin-compatible with BME280 (humidity variant)

Applications

  • Altitude measurement and navigation
  • Weather forecasting and meteorology
  • Indoor navigation and floor detection
  • Drone altitude hold
Product Introduction: BMP280 Product Introduction

The BMP280 from Bosch Sensortec is a high-precision, low-power digital barometric pressure sensor. It measures absolute pressure from 300hPa to 1100hPa with an accuracy of +/-1hPa and can derive altitude with approximately 1m resolution. The sensor also provides temperature measurement with +/-1.0C accuracy for on-chip temperature compensation. Multiple operating modes allow trade-offs between resolution and power consumption: ultra-low power mode draws only 2.7uA at 1Hz, while ultra-high resolution mode provides 0.01hPa resolution. The compact 2.5×2.0×0.95mm LGA package and dual I2C/SPI interface make it easy to integrate into portable and wearable devices.

Working Principle: BMP280 Working Principle

The BMP280 uses a piezoresistive MEMS pressure sensing element whose resistance changes with applied atmospheric pressure. The sensing element is connected in a Wheatstone bridge configuration and its output is digitized by an internal ADC. Factory-calibrated compensation parameters stored in non-volatile memory correct for offset, sensitivity, and temperature drift. The on-chip temperature sensor provides the reference for pressure compensation. The device supports three power modes: sleep (0.1uA), forced (one measurement on demand), and normal (continuous periodic measurements with configurable standby time). The IIR filter can be configured to reduce short-term disturbances from wind or door slamming.

Pin Description: BMP280 Pin Definition and Functions
Pin Name Function
1 GND Ground
2 CSB Chip select (active low, also selects I2C/SPI)
3 SDI SPI data in / I2C data (SDA)
4 SCK SPI clock / I2C clock (SCL)
5 SDO SPI data out / I2C address select
6 VDDIO I/O supply voltage (1.2-3.6V)
7 GND Ground
8 VDD Core supply voltage (1.71-3.6V)
Application Scenarios: In which products and applications is BMP280 used
  • Drone altitude hold systems using barometric pressure with 1m resolution
  • Wearable fitness trackers estimating elevation change during hiking/running
  • Indoor navigation and floor-level detection in smart buildings
  • Weather stations with ultra-low power continuous atmospheric pressure monitoring
Alternative Models: What chips are recommended as replacements for BMP280
Model Manufacturer Key Difference
BME280 Bosch Pin-compatible, adds humidity sensor
BMP388 Bosch Newer, +/-0.5hPa accuracy, lower power
DPS310 Infineon +/-0.5hPa, temperature compensated
LPS22HB ST 26-1260hPa, embedded FIFO

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1