Opens in a new tab

Home » Integrated Circuits ICs » W25Q32JVSIQ

W25Q32JVSIQ

32Mbit (4MB) Serial Flash, Standard/Dual/Quad SPI, 133MHz, SOIC-8

7962

Effective Inventory

Image for reference only

Manufacturer Part:

W25Q32JVSIQ

Package:

SOIC-8 (208mil, 5.3x8mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The W25Q32JVSIQ from Winbond is a 32M-bit (4MB) Serial Flash memory supporting Standard SPI, Dual SPI, and Quad SPI operation at up to 133MHz (Quad). It provides flexible erase architecture (4KB sector, 32KB/64KB block) and 100K endurance cycles. Packaged in SOIC-8 (208mil).

Key Specifications

Density 32M-bit (4MB)
Interface Standard/Dual/Quad SPI
Max Clock Frequency 133MHz (Quad SPI)
Supply Voltage 2.7V to 3.6V
Standby Current 1uA (typ)
Active Read Current 25mA (typ)
Erase Sectors 4KB, 32KB, 64KB
Page Size 256 bytes
Endurance 100,000 erase/write cycles
Data Retention 20 years
Package SOIC-8 (208mil, 5.3x8mm)
Operating Temperature -40 to +85 C

Features

  • Standard/Dual/Quad SPI interface
  • 133MHz clock in Quad SPI mode
  • Flexible 4KB/32KB/64KB erase architecture
  • 100K erase/write cycle endurance
  • 1uA deep power-down mode
  • Write protection: individual sectors or entire chip
  • 3x 256-byte security registers with OTP lock

Applications

  • Firmware storage for embedded systems
  • Boot code and parameter storage
  • Graphics and voice data storage
  • Serial Flash for FPGA configuration
Product Introduction: W25Q32JVSIQ Product Introduction

The W25Q32JVSIQ from Winbond is a 32M-bit (4MB) Serial Flash memory device that supports Standard SPI, Dual SPI, and Quad SPI interfaces for high-performance read operations up to 533Mbps effective data rate (133MHz x 4 bits). The flexible erase architecture provides 4KB sectors for fine-grained updates, 32KB and 64KB blocks for bulk operations, and full chip erase. The device operates from 2.7V to 3.6V and draws only 1uA in deep power-down mode. Three 256-byte security registers with one-time programmable (OTP) lock support unique device identification and secure key storage. The SOIC-8 (208mil) package is the most common form factor for Serial Flash in embedded systems.

Working Principle: W25Q32JVSIQ Working Principle

The W25Q32JVSIQ uses a NOR Flash memory array organized as 16384 programmable pages of 256 bytes each. The SPI interface uses a command-based protocol: the master asserts CS, sends an 8-bit command byte, followed by 24-bit address and optional dummy bytes, then reads or writes data. Read operations support Standard (1 data line), Dual Output (2 data lines), and Quad Output (4 data lines) modes. Write operations require the Write Enable command before each program or erase operation. Page Program writes up to 256 bytes at a time. Erase operations set all bits to 1 (FFh): Sector Erase (4KB), Block Erase (32KB/64KB), or Chip Erase. The Status Register indicates busy/ready state and write protection status. Quad mode requires setting the Quad Enable bit in Status Register-2.

Pin Description: W25Q32JVSIQ Pin Definition and Functions
Pin Name Function
1 /CS Chip Select (active low)
2 DO (IO1) Data Output / IO1 (Dual/Quad)
3 /WP (IO2) Write Protect / IO2 (Quad mode)
4 GND Ground
5 DI (IO0) Data Input / IO0 (Dual/Quad)
6 CLK Serial Clock
7 /HOLD (IO3) Hold / IO3 (Quad mode)
8 VCC Supply voltage (2.7-3.6V)
Application Scenarios: In which products and applications is W25Q32JVSIQ used
  • Firmware and boot code storage for ARM MCUs with Quad SPI for fast boot
  • FPGA configuration storage with 133MHz Quad SPI loading speed
  • Graphics and font data storage for embedded display systems
  • Parameter and calibration data with 100K cycle endurance and 20-year retention
Alternative Models: What chips are recommended as replacements for W25Q32JVSIQ
Model Manufacturer Key Difference
W25Q64JVSIQ Winbond 64Mbit (8MB), pin-compatible upgrade
MX25L3206E Macronix 32Mbit, standard SPI, compatible
SST25VF032B Microchip 32Mbit, SQI interface
AT25SF321 ADI 32Mbit, low power, Quad SPI

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1