Opens in a new tab

TDA2030A

18W Hi-Fi audio power amplifier, +/-6-22V, 0.08% THD, Pentawatt-5

4612

Effective Inventory

Image for reference only

Manufacturer Part:

TDA2030A

Package:

Pentawatt-5 (TO-220-5 vertical)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TDA2030A from STMicroelectronics is an 18W Hi-Fi audio power amplifier in a Pentawatt-5 package. Operating from +/-6V to +/-22V, it delivers up to 18W into 4 Ohm with 0.08% typical THD. Internal thermal and short-circuit protection make it nearly indestructible in typical audio circuits.

Key Specifications

Output Power 18W (4 Ohm, +/-16V, 0.5% THD)
Supply Voltage +/-6V to +/-22V
THD (typical) 0.08% (8 Ohm, 8W, +/-16V)
Output Current 3.5A peak
Bandwidth 10Hz to 140kHz (-3dB)
Input Sensitivity 200mV (for 8W output)
Package Pentawatt-5 (TO-220-5 vertical)
Operating Temperature 0 to +150 C (junction)

Features

  • 18W output power into 4 Ohm load
  • Very low THD: 0.08% typical
  • Wide supply voltage range: +/-6V to +/-22V
  • Built-in thermal shutdown
  • Short-circuit protection
  • High output current: 3.5A peak

Applications

  • Hi-Fi audio amplifiers
  • Active speaker systems
  • Bridge-tied-load (BTL) amplifiers
  • Instrument amplifiers
Product Introduction: TDA2030A Product Introduction

The TDA2030A from STMicroelectronics is a monolithic audio power amplifier in a Pentawatt-5 package capable of delivering 18W output power into a 4 Ohm load with only 0.08% typical total harmonic distortion. Operating from split supplies of +/-6V to +/-22V, it provides excellent sound quality for Hi-Fi applications. The device includes comprehensive protection: thermal shutdown activates when junction temperature exceeds approximately 150C, and output short-circuit protection limits current to a safe level. The 3.5A peak output current enables driving low-impedance loads. Two TDA2030A devices can be connected in bridge-tied-load (BTL) configuration to deliver up to 36W into 4 Ohm. The device requires minimal external components for a complete amplifier circuit.

Working Principle: TDA2030A Working Principle

The TDA2030A uses a class AB output stage with a differential input pair. The input stage accepts both inverting and non-inverting signals, enabling flexible gain configuration. The class AB output stage uses complementary NPN and PNP power transistors with bias circuitry to minimize crossover distortion. The output stage includes current-sensing for short-circuit protection: when output current exceeds the threshold, the drive is reduced to limit current. Thermal protection uses a temperature-sensing circuit that monitors die temperature and disables the output stage when it exceeds the safe limit. The frequency compensation is internal, requiring no external compensation capacitor. The 140kHz bandwidth ensures phase margin and flat frequency response across the audio band.

Pin Description: TDA2030A Pin Definition and Functions
Pin Name Function
1 IN+ Non-inverting input
2 IN- Inverting input (feedback)
3 VCC- Negative supply voltage
4 OUTPUT Amplifier output (to speaker)
5 VCC+ Positive supply voltage
Application Scenarios: In which products and applications is TDA2030A used
  • Single-channel Hi-Fi audio amplifier delivering 18W into 4 Ohm speakers
  • Active monitor speaker systems with 0.08% THD for studio use
  • Bridge-tied-load (BTL) amplifiers using two devices for 36W output
  • Guitar and instrument practice amplifiers with thermal and short-circuit protection
Alternative Models: What chips are recommended as replacements for TDA2030A
Model Manufacturer Key Difference
TDA2050 ST 32W into 4 Ohm, higher power
TDA7294 ST 100W DMOS, much higher power
LM386N-4 TI 1W, single supply, low power
TPA3116D2 TI Class-D, 50W, much more efficient

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1