Opens in a new tab

UC3842BN

Current-mode PWM controller, 500kHz, 1A output, 16V/10V UVLO, 8-PDIP

3791

Effective Inventory

Image for reference only

Manufacturer Part:

UC3842BN

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UC3842BN from Texas Instruments is a current-mode PWM controller for offline and DC-DC switching power supplies. With fixed-frequency operation up to 500kHz, 1A totem-pole output, and UVLO with 16V/10V hysteresis, it is the most widely used SMPS controller IC. Packaged in 8-PDIP.

Key Specifications

Control Mode Current-mode PWM
Switching Frequency Up to 500kHz
Start Current 0.5mA (typ)
Operating Current 11mA (typ)
UVLO Threshold 16V ON / 10V OFF
Reference Voltage 5V +/-2%
Output Drive +/-1A peak totem-pole
Max Duty Cycle 96%
Package 8-PDIP
Operating Temperature 0 to +70 C

Features

  • Current-mode control for improved line regulation
  • Low start-up current: 0.5mA typical
  • UVLO with 6V hysteresis for reliable startup
  • +/-1A totem-pole output for direct MOSFET drive
  • 5V precision reference (2%)
  • Automatic feedforward compensation
  • Pulse-by-pulse current limiting

Applications

  • Offline flyback converters
  • Forward and boost converters
  • DC-DC switching regulators
  • Battery chargers
Product Introduction: UC3842BN Product Introduction

The UC3842BN from Texas Instruments is the industry-standard current-mode PWM controller for switching power supplies. It uses peak current-mode control, where the output switch is turned on at the start of each clock cycle and turned off when the peak inductor current reaches the threshold set by the error amplifier. This provides inherent line voltage feedforward compensation and pulse-by-pulse current limiting. The 1A totem-pole output directly drives power MOSFET gates without external driver circuits. The 16V/10V UVLO with 6V hysteresis ensures reliable startup from high-voltage bus through a start-up resistor. The 5V +/-2% reference powers the error amplifier and external circuits. The UC3842 is the B-version (higher accuracy) in 8-PDIP for 0-70C operation.

Working Principle: UC3842BN Working Principle

The UC3842 uses peak current-mode control: an internal oscillator sets the switching frequency via RT/CT, and generates a clock pulse that sets the PWM latch, turning on the output driver. Current through the external MOSFET is sensed via a resistor on the ISENSE pin. When the voltage on ISENSE exceeds the error amplifier output (divided by 3), the comparator resets the PWM latch, turning off the output. The error amplifier compares a fraction of the output voltage (via the VFB pin) to the 5V reference and adjusts the current threshold accordingly. Current-mode control inherently rejects input voltage variations (feedforward) because the peak current setpoint automatically compensates for changes in input voltage. The slope compensation (typically a small ramp added to the current sense signal) prevents sub-harmonic oscillation at duty cycles above 50%.

Pin Description: UC3842BN Pin Definition and Functions
Pin Name Function
1 COMP Error amplifier output / compensation
2 VFB Voltage feedback input (error amp inverting)
3 ISENSE Current sense input (compare threshold = VCOMP/3)
4 RT/CT Oscillator timing resistor and capacitor
5 GND Ground
6 OUTPUT PWM output (totem-pole, +/-1A)
7 VCC Supply voltage (UVLO 16V/10V)
8 VREF 5V reference output (2%)
Application Scenarios: In which products and applications is UC3842BN used
  • Offline flyback converter primary-side controller with 16V UVLO startup
  • DC-DC forward and boost converters with 500kHz switching frequency
  • Battery charger SMPS with pulse-by-pulse current limiting
  • Multiple output power supplies using current-mode control for cross-regulation
Alternative Models: What chips are recommended as replacements for UC3842BN
Model Manufacturer Key Difference
UC3843BN TI 8.5V/7.9V UVLO, lower startup voltage
UC3844BN TI 50% max duty cycle, forward converter
UC3845BN TI 50% duty, 8.5V/7.9V UVLO
LM5022 TI 60V, current mode, active clamp

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1