Opens in a new tab

LM386N-3

Low-voltage 500mW audio amp, 4-12V, gain 20-200, 8-PDIP

7671

Effective Inventory

Image for reference only

Manufacturer Part:

LM386N-3

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM386N-3 from Texas Instruments is a low-voltage audio power amplifier delivering 500mW into 8 Ohm from a single 9V supply. Requiring minimal external components and with a fixed gain of 20 (adjustable to 200), it is the most popular audio amplifier IC for hobbyist and small speaker projects. Packaged in 8-PDIP.

Key Specifications

Output Power 500mW (8 Ohm, 9V supply)
Supply Voltage 4V to 12V
Voltage Gain 20 (26dB) default, adjustable to 200 (46dB)
Quiescent Current 4mA (typ)
Input Impedance 50kOhm
THD 0.2% (typ at 125mW)
Bandwidth 300kHz
Package 8-PDIP
Operating Temperature 0 to +70 C

Features

  • Single supply operation: 4V to 12V
  • Only 4mA quiescent current
  • Default gain of 20, adjustable to 200 with external capacitor
  • Self-centering output (VCC/2 bias)
  • Minimal external components required
  • Ground-referenced input

Applications

  • Small speaker amplifiers
  • Intercom and walkie-talkie audio
  • AM/FM radio audio output
  • Ultrasonic drivers
Product Introduction: LM386N-3 Product Introduction

The LM386N-3 from Texas Instruments is a low-voltage audio power amplifier designed for battery-powered applications. It delivers 500mW into an 8 Ohm speaker from a single 9V supply with only 4mA quiescent current, making it ideal for portable audio devices. The default voltage gain of 20 (26dB) requires no external components; adding a capacitor between pins 1 and 8 increases the gain to 200 (46dB). The output is self-centering at VCC/2, eliminating the need for a coupling capacitor in some configurations. With only a handful of external components, a complete audio amplifier can be built in minutes. The LM386 has been the go-to audio amplifier IC for decades, used in everything from guitar practice amps to toy electronics.

Working Principle: LM386N-3 Working Principle

The LM386 uses a class AB output stage with a differential input pair. The input stage is ground-referenced, accepting signals directly without DC blocking capacitors in many configurations. The internal feedback network sets the default gain to 20; connecting a capacitor (10uF typical) between pins 1 and 8 bypasses the internal 1.35kOhm resistor, increasing gain to 200. The output stage is biased to VCC/2 by an internal voltage divider, allowing single-supply operation with the output coupling capacitor blocking the DC offset from the speaker. The 300kHz bandwidth provides ample margin for audio applications. The low quiescent current of 4mA makes battery operation practical. The class AB output stage delivers reasonable efficiency while maintaining low crossover distortion.

Pin Description: LM386N-3 Pin Definition and Functions
Pin Name Function
1 GAIN Gain adjust (cap to pin 8 for 200x gain)
2 IN- Inverting input (usually grounded)
3 IN+ Non-inverting input (audio signal)
4 GND Ground
5 VOUT Audio output (via coupling capacitor to speaker)
6 VCC Power supply (4-12V)
7 BYPASS Bypass capacitor (to ground, for ripple rejection)
8 GAIN Gain adjust (cap to pin 1 for 200x gain)
Application Scenarios: In which products and applications is LM386N-3 used
  • Portable speaker amplifier from 9V battery with 500mW output
  • AM/FM radio audio output stage with 4mA quiescent current
  • Guitar practice amplifier with gain adjustable from 20 to 200
  • Intercom and walkie-talkie audio driver with minimal external components
Alternative Models: What chips are recommended as replacements for LM386N-3
Model Manufacturer Key Difference
LM386N-1 TI 325mW output, 4-12V
LM386N-4 TI 1W output, 5-18V, higher power
LM4906 TI Bridge-tied-load, no output capacitor
PAM8302A Diodes Inc Class-D, 2.5W, much more efficient

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1