Opens in a new tab

ESP8266EX

WiFi MCU, Tensilica L106 160MHz, 802.11b/g/n, QFN-32, IoT

6138

Effective Inventory

Image for reference only

Manufacturer Part:

ESP8266EX

Package:

QFN-32 (5x5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ESP8266EX from Espressif Systems is a low-cost WiFi microcontroller with integrated TCP/IP stack. Featuring a Tensilica L106 32-bit RISC core at 160MHz, 64KB IRAM, and 802.11 b/g/n WiFi, it revolutionized IoT by adding WiFi to any project for under $1. Packaged in QFN-32 (5x5mm).

Key Specifications

Core Tensilica L106 32-bit RISC
Max Frequency 160MHz
ROM 64KB (boot)
SRAM 64KB IRAM + 96KB DRAM
WiFi 802.11 b/g/n (2.4GHz), up to 72.2Mbps
GPIO 17 (multiplexed)
ADC 1 channel, 10-bit
Interfaces SPI, I2C, UART, I2S, PWM
Supply Voltage 2.5V to 3.6V
Package QFN-32 (5x5mm)
Operating Temperature -40 to +85 C

Features

  • Complete WiFi networking solution with TCP/IP stack
  • Supports STA, AP, and STA+AP modes
  • 160MHz 32-bit processor with 64KB IRAM
  • 10-bit ADC for analog sensor reading
  • Deep sleep current: 20uA
  • Arduino and NodeMCU ecosystem support

Applications

  • IoT sensor nodes and smart home devices
  • WiFi-enabled embedded systems
  • Wireless data logging and telemetry
  • Internet-connected actuators and controllers
Product Introduction: ESP8266EX Product Introduction

The ESP8266EX from Espressif Systems is the chip that democratized WiFi for embedded systems. When it launched in 2014, it disrupted the IoT market by offering a complete WiFi solution with integrated TCP/IP stack and 32-bit processor for under $1. The Tensilica L106 core runs at up to 160MHz with 64KB IRAM and 96KB DRAM, providing enough processing power for application logic alongside WiFi communication. The 802.11 b/g/n radio supports station mode (connecting to a router), soft-AP mode (acting as an access point), and simultaneous STA+AP mode. The 17 GPIO pins support SPI, I2C, UART, I2S, and PWM peripherals. The single 10-bit ADC channel reads analog sensors. Deep sleep mode reduces current to 20uA for battery-powered applications. The massive Arduino and NodeMCU open-source ecosystem provides libraries for MQTT, HTTP, OTA updates, and virtually every IoT protocol.

Working Principle: ESP8266EX Working Principle

The ESP8266EX integrates a Tensilica L106 32-bit RISC processor, WiFi baseband/MAC/RF, and peripheral interfaces on a single die. The L106 core executes instructions from 64KB IRAM and accesses data in 96KB DRAM. The WiFi subsystem handles the 802.11 b/g/n PHY and MAC layers, offloading the processor from low-level WiFi processing. The RF front-end requires only a few external components (crystal, antenna matching, and decoupling capacitors). The boot ROM contains the bootloader that loads firmware from external SPI Flash into IRAM. The WiFi stack runs as a background task, handling association, authentication, and data transfer while the application runs on the main processor. Power management modes include active, modem sleep (WiFi off, CPU on), light sleep (CPU paused), and deep sleep (only RTC running, 20uA).

Pin Description: ESP8266EX Pin Definition and Functions
Pin Name Function
1 VDDA Analog power supply (3.0-3.6V)
2-5 LNA/ADC/GPIO WiFi LNA / ADC / general purpose I/O
6-11 GPIO0-5 General purpose I/O (multiplexed with SPI, I2C, UART)
12 MTDI/GPIO12 HSPID / MTDI / GPIO
13-14 MTCK/MTMS JTAG debug / GPIO
15-16 MTDO/MTDO JTAG TDO / GPIO14-15
17 GPIO16 Wakeup from deep sleep
18 XPD_DCDC Deep sleep wakeup
19-20 XTAL 26MHz crystal oscillator
21 VDD3V3 Digital power supply (3.0-3.6V)
22 GND Ground
Application Scenarios: In which products and applications is ESP8266EX used
  • IoT sensor nodes with WiFi connectivity and 20uA deep sleep for battery operation
  • Smart home devices using MQTT or HTTP protocols over 802.11 b/g/n
  • WiFi serial bridge (transparent UART-to-WiFi) using AT command firmware
  • Low-cost wireless data logging with Arduino ecosystem and OTA updates
Alternative Models: What chips are recommended as replacements for ESP8266EX
Model Manufacturer Key Difference
ESP32-WROOM-32 Espressif Dual-core, BT/BLE, more GPIO, upgrade path
ESP8285 Espressif 1MB Flash integrated (no external flash needed)
ESP32-C3 Espressif RISC-V, WiFi+BLE5, modern replacement
ESP32-S2 Espressif Single-core, USB-OTG, more GPIO

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1