Opens in a new tab

BD139-16

NPN medium-power transistor, 80V, 1.5A, hFE 100-250, SOT-32

13544

Effective Inventory

Image for reference only

Manufacturer Part:

BD139-16

Package:

SOT-32 (TO-126)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BD139-16 from onsemi is an NPN medium-power transistor rated at 80V and 1.5A. With hFE of 100-250 (group 16) and 12.5W power dissipation in SOT-32 (TO-126), it is widely used in audio amplifiers, motor drivers, and general-purpose switching. Packaged in SOT-32.

Key Specifications

Type NPN Medium Power BJT
VCEO 80V
IC (continuous) 1.5A
hFE (Group 16) 100-250 (at 150mA, 2V)
VCE(sat) 0.5V (max at 500mA, 50mA base)
fT 190MHz
Power Dissipation 12.5W (at TC=25C)
Package SOT-32 (TO-126)
Operating Temperature -55 to +150 C

Features

  • 80V collector-emitter voltage
  • 1.5A continuous collector current
  • hFE 100-250 (group 16) for medium gain
  • 190MHz transition frequency
  • Complementary PNP: BD140-16
  • SOT-32 package with metal tab for heatsink

Applications

  • Audio driver and output stages
  • Motor driver circuits
  • Medium-power switching
  • General-purpose amplification
Product Introduction: BD139-16 Product Introduction

The BD139-16 from onsemi is an NPN medium-power silicon transistor in a SOT-32 (TO-126) package. The -16 suffix indicates hFE group 16 (100-250 at 150mA), providing consistent gain for audio amplifier designs. Rated at 80V and 1.5A with 12.5W power dissipation, it fills the gap between small-signal transistors (BC547 at 100mA) and power transistors (TIP41C at 6A). The 190MHz transition frequency supports audio and medium-frequency applications. The complementary BD140-16 (PNP) enables push-pull and complementary circuit configurations. The SOT-32 package has a metal tab on the back for heatsink mounting, with the tab connected to the collector. The BD139 is one of the most commonly used transistors in DIY audio amplifiers, serving as a driver stage for larger output transistors like the TIP41C/TIP42C.

Working Principle: BD139-16 Working Principle

The BD139-16 is a silicon NPN epitaxial planar transistor. In active mode, base current controls collector current with gain (hFE) of 100-250. The -16 group selects transistors with hFE between 100 and 250, ensuring matched pairs can be selected for push-pull amplifiers. For switching applications, the transistor is driven into saturation by providing IB > IC/hFE(min), reducing VCE to VCE(sat) of approximately 0.5V at 500mA. The 190MHz transition frequency provides adequate bandwidth for audio driver stages. In audio amplifier output stages, the BD139 drives the base of a larger power transistor (Darlington or emitter-follower configuration), providing voltage gain in the driver stage while the power transistor handles the current. The SOT-32 metal tab (collector) requires an insulating washer when mounting to a grounded heatsink.

Pin Description: BD139-16 Pin Definition and Functions
Pin Name Function
1 Emitter Current flows out
2 Collector Current flows in (connected to metal tab)
3 Base Control input
Application Scenarios: In which products and applications is BD139-16 used
  • Audio amplifier driver stage with hFE 100-250 driving TIP41C/TIP42C output transistors
  • Motor driver with 1.5A collector current and 80V rating for 24V systems
  • Push-pull audio output with BD140-16 PNP complement
  • General-purpose medium-power switching in SOT-32 footprint
Alternative Models: What chips are recommended as replacements for BD139-16
Model Manufacturer Key Difference
BD140-16 onsemi PNP complement, -80V, -1.5A
BD139-10 onsemi Same transistor, hFE 63-160 (group 10)
TIP41C onsemi 100V, 6A, TO-220, higher power
BC547B onsemi 45V, 100mA, TO-92, lower power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1