Opens in a new tab

74HC245N

Octal 3-state bus transceiver, bidirectional, 12ns, 20-PDIP

14580

Effective Inventory

Image for reference only

Manufacturer Part:

74HC245N

Package:

20-PDIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74HC245N from Texas Instruments is an octal 3-state bus transceiver with bidirectional data flow. With active-low output enable and direction control, it provides bus isolation and driving capability for data buses, LED strips, and level translation. Packaged in 20-PDIP.

Key Specifications

Logic Family 74HC (High-Speed CMOS)
Function Octal bus transceiver (3-state)
Channels 8 bidirectional
Propagation Delay 12ns (typ at 4.5V)
Supply Voltage 2V to 6V
Output Current +/-6mA (at 4.5V)
Package 20-PDIP
Operating Temperature -40 to +85 C

Features

  • 8-bit bidirectional bus transceiver
  • 3-state outputs for bus sharing
  • Direction control (DIR pin)
  • Output enable (active-low OE)
  • +/-6mA output drive at 4.5V
  • Pin-compatible with 74HCT245, 74LS245

Applications

  • Microprocessor data bus buffering
  • LED strip signal amplification
  • Level translation between logic families
  • Bus isolation and driving
Product Introduction: 74HC245N Product Introduction

The 74HC245N from Texas Instruments is an octal 3-state bus transceiver that provides bidirectional data flow between two buses. Eight data channels (A0-A7 and B0-B7) can transfer data in either direction under control of the DIR (direction) pin. When DIR is HIGH, data flows from A to B; when LOW, from B to A. The active-low output enable (OE) pin puts both A and B outputs in a high-impedance state, disconnecting the device from both buses for bus-sharing. The +/-6mA output drive at 4.5V provides sufficient current to drive long PCB traces, cables, and LED strip data lines. The 74HC245 is widely used as a bus buffer between microprocessor buses and peripheral chips, as a signal amplifier for long LED strip data lines (WS2812B, etc.), and as a level translator between 3.3V and 5V logic domains.

Working Principle: 74HC245N Working Principle

The 74HC245N contains eight pairs of 3-state buffers, one pair for each data channel. Each pair consists of an A-to-B buffer and a B-to-A buffer. The DIR input selects which set of buffers is active: DIR=HIGH enables the A-to-B buffers (A is input, B is output), DIR=LOW enables the B-to-A buffers (B is input, A is output). The OE input, when HIGH, disables all buffers and places both A and B ports in high-impedance state, regardless of DIR. This allows multiple 74HC245 devices to share a common bus, with only one enabled at a time. The 3-state outputs have active pull-up and pull-down transistors when enabled, and both transistors off when disabled. The 12ns propagation delay supports bus speeds up to approximately 30MHz. For LED strip applications, the 74HC245 boosts the data signal to drive long strips that exceed the MCU output capability.

Pin Description: 74HC245N Pin Definition and Functions
Pin Name Function
1 DIR Direction control (HIGH=A to B, LOW=B to A)
2 A1 Bus A, channel 1
3 A2 Bus A, channel 2
4 A3 Bus A, channel 3
5 A4 Bus A, channel 4
6 A5 Bus A, channel 5
7 A6 Bus A, channel 6
8 A7 Bus A, channel 7
9 A8 Bus A, channel 8
10 GND Ground
11 B8 Bus B, channel 8
12 B7 Bus B, channel 7
13 B6 Bus B, channel 6
14 B5 Bus B, channel 5
15 B4 Bus B, channel 4
16 B3 Bus B, channel 3
17 B2 Bus B, channel 2
18 B1 Bus B, channel 1
19 OE Output enable (active LOW)
20 VCC Supply voltage (2-6V)
Application Scenarios: In which products and applications is 74HC245N used
  • Microprocessor data bus buffering with 8-bit bidirectional transceiver
  • WS2812B LED strip data signal amplification for long strip runs
  • 3.3V to 5V level translation using 74HCT245 with TTL thresholds
  • Bus isolation between MCU and peripherals with OE-controlled disconnect
Alternative Models: What chips are recommended as replacements for 74HC245N
Model Manufacturer Key Difference
74HCT245N TI TTL input thresholds, 3.3V to 5V translation
74LS245 TI Original TTL version, higher power
74HC244N TI Unidirectional buffer, 8-bit (no direction control)
74HC541N TI Unidirectional buffer, 3-state, inverting

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1