Opens in a new tab

STM8L151K6T6

Ultra-low-power 8-bit MCU, STM8 core, 32KB Flash, 1KB EEPROM, LQFP-32

3200

Effective Inventory

Image for reference only

Manufacturer Part:

STM8L151K6T6

Package:

LQFP-32 (7×7×1.4 mm, 0.8mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM8L151K6T6 from STMicroelectronics is an ultra-low-power 8-bit microcontroller based on the STM8 core, featuring 32 KB Flash, 1 KB EEPROM, and 2 KB RAM. Operating from 1.8V to 3.6V with five low-power modes (down to 350 nA in Halt), it integrates a rich peripheral set including 12-bit ADC, DAC, comparators, LCD driver, and multiple communication interfaces in a compact LQFP-32 package.

Key Specifications

Core STM8 8-bit CISC
Max Clock Frequency 16 MHz (16 MIPS peak)
Flash Memory 32 KB
SRAM 2 KB
Data EEPROM 1 KB (with ECC)
Operating Voltage 1.8V to 3.6V (down to 1.65V at power-down)
GPIO 30
ADC 12-bit, up to 1 Msps, up to 25 channels
DAC 12-bit, 1 channel with output buffer
Comparators 2 (ultra-low-power, one rail-to-rail)
Communication SPI, I2C (400 kHz), USART (ISO 7816, IrDA)
Timers 2× 16-bit (2-ch), 1× 16-bit advanced (3-ch), 1× 8-bit
Low Power Modes Wait, Low-power run (5.1 µA), Active-halt (1.3 µA), Halt (350 nA)
Operating Temperature -40°C to +85°C
Package LQFP-32 (7×7×1.4 mm)

Features

  • Ultra-low-power: 350 nA Halt mode, 5.1 µA Low-power run
  • Five low-power modes with fast 4.7 µs wakeup from Halt
  • Integrated 1 KB EEPROM with ECC for data retention
  • Programmable voltage detector (PVD) and 5-threshold BOR
  • Real-time clock (RTC) with BCD calendar and alarm
  • Segment LCD driver: up to 4×28 with step-up converter
  • SWIM single-wire debug and fast Flash programming
  • Capacitive sensing: up to 16 touchkey channels

Applications

  • Smart meters and energy monitoring
  • Portable medical devices and health monitors
  • Industrial sensors and low-power data loggers
  • Consumer electronics with LCD display
  • Touch-sensing user interfaces
Product Introduction: STM8L151K6T6 Product Introduction

The STM8L151K6T6 from STMicroelectronics is an ultra-low-power 8-bit MCU featuring the STM8 core at 16 MHz with 32 KB Flash, 1 KB EEPROM, and 2 KB RAM. With five low-power modes down to 350 nA Halt current, 12-bit ADC/DAC, LCD driver, capacitive sensing, and SPI/I2C/USART interfaces, it is optimized for battery-powered smart meters, portable medical devices, and low-power sensor nodes in a compact LQFP-32 package.

Working Principle: STM8L151K6T6 Working Principle

The STM8L151K6T6 uses an enhanced STM8 8-bit CISC core with Harvard architecture and 3-stage pipeline, achieving up to 16 MIPS at 16 MHz. The 24-bit linear addressing space simplifies memory access. Multiple clock sources (1-16 MHz HSE, 32 kHz LSE, internal 16 MHz RC, 38 kHz RC) provide flexibility for power management. The five low-power modes progressively disable CPU and peripheral clocks: Wait (CPU stopped, peripherals running), Low-power run (low-speed clock, 5.1 µA), Low-power wait (3 µA), Active-halt (RTC only, 1.3 µA), and Halt (350 nA). The SWIM interface enables non-intrusive debugging and ultra-fast Flash programming without removing the device from the application.

Pin Description: STM8L151K6T6 Pin Definition and Functions
Pin Group Name Type Function
Power VDD, VSS Power Supply voltage (1.8-3.6V) and ground
Debug SWIM I/O Single-wire interface module for debug/programming
Reset NRST I/O Active-low reset with built-in pull-up
Oscillator OSCIN/OSCOUT I/O External crystal oscillator (1-16 MHz)
Oscillator OSC32IN/OSC32OUT I/O External 32 kHz crystal for RTC
GPIO PA0-PA3, PB0-PB7, PC0-PC7, PD0-PD7 I/O 30 general-purpose I/O pins with interrupt capability
Application Scenarios: In which products and applications is STM8L151K6T6 used
  • Smart meters: water, gas, electricity metering with LCD display and RTC
  • Portable medical devices: blood glucose meters, pulse oximeters with low-power sensing
  • Industrial sensors and low-power wireless sensor nodes
  • Consumer electronics with segment LCD and capacitive touch buttons
  • Building automation: thermostats, occupancy sensors with touch interface
Alternative Models: What chips are recommended as replacements for STM8L151K6T6
Manufacturer Part Number Package Notes
ST STM8L151G6U6 UFQFPN-28 Same features, smaller 4×4 mm package
ST STM8L152K6T6 LQFP-32 Same with integrated LCD controller
ST STM8L051F3P6 TSSOP-20 Lower cost, 8KB Flash, entry-level
Microchip PIC16LF18325 SOIC-14 8-bit, low-pin-count ultra-low-power alternative
TI MSP430G2553 TSSOP-20 16-bit ultra-low-power MCU alternative

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1