Opens in a new tab

Home » Integrated Circuits ICs » LTC1966IMS8#PBF

LTC1966IMS8#PBF

RMS-to-DC converter, ∆Σ, 0.1% accuracy, 155µA, MSOP-8

1600

Effective Inventory

Image for reference only

Manufacturer Part:

LTC1966IMS8#PBF

Package:

MSOP-8 (3.0×3.0×0.85 mm, 0.65mm pitch)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC1966IMS8#PBF from Analog Devices (formerly Linear Technology) is a precision micropower true RMS-to-DC converter utilizing a patented delta-sigma (∆Σ) computational technique. With 0.1% gain accuracy, 0.02% linearity, and 155 µA supply current, it is far simpler to use, more accurate, and lower power than conventional log-antilog RMS-to-DC converters. Only one external capacitor is required for operation.

Key Specifications

Gain Accuracy 0.1% (50 Hz to 1 kHz)
Total Error 0.25% (50 Hz to 1 kHz)
Linearity 0.02%
Bandwidth 800 kHz (-3 dB), 6 kHz (±1%)
Supply Current 155 µA typical, 170 µA max
Shutdown Current 0.1 µA
Supply Voltage 2.7V to 5.5V single / ±5.5V dual
Input Range Up to 1VPEAK differential, rail-to-rail CM
Crest Factor Support Up to 4
Operating Temperature -40°C to +85°C (I grade)
Package MSOP-8 (3×3 mm)

Features

  • ∆Σ computational technique: no diodes, heaters, or logarithms
  • Only one external averaging capacitor required
  • 0.1% gain accuracy with 0.02% linearity
  • Differential or single-ended input with rail-to-rail common mode
  • Constant bandwidth independent of input voltage
  • Rail-to-rail output with separate output reference pin
  • Ultra-low 0.1 µA shutdown current
  • Insensitive to PCB soldering stress and temperature drift

Applications

  • True RMS digital multimeters and panel meters
  • True RMS AC + DC measurements
  • Vibration and rumble monitoring systems
  • Audio level measurement and compression
  • Power line voltage and current monitoring
Product Introduction: LTC1966IMS8#PBF Product Introduction

The LTC1966IMS8#PBF from Analog Devices is a precision micropower RMS-to-DC converter using patented ∆Σ technology. Achieving 0.1% gain accuracy and 0.02% linearity with only one external capacitor, it eliminates the complexity and drift of traditional log-antilog converters. The 155 µA supply current, differential input, and constant 800 kHz bandwidth make it ideal for true RMS multimeters, power monitoring, and vibration measurement in portable and industrial instruments.

Working Principle: LTC1966IMS8#PBF Working Principle

The LTC1966 uses a patented delta-sigma (∆Σ) computational technique to perform true RMS-to-DC conversion. Unlike traditional log-antilog converters that compute Vrms = anti-log(avg(log²(Vin))), the LTC1966 uses a ∆Σ modulator to square the input signal, then averages the squared output through an external capacitor, and finally takes the square root via a ∆Σ demodulator circuit. This approach provides exceptional linearity (0.02%) and accuracy (0.1%) without the temperature sensitivity and matching requirements of log-antilog circuits. The external averaging capacitor (typically 1 µF) sets the low-frequency cutoff, while the bandwidth remains constant at 800 kHz regardless of input amplitude. The separate VOUTRTN pin allows the DC output to be referenced to any voltage within the supply rails.

Pin Description: LTC1966IMS8#PBF Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply (2.7-5.5V)
2 VIN2 Input Differential input negative terminal
3 VIN1 Input Differential input positive terminal
4 VSS Power Negative supply / ground (0V for single supply)
5 ENABLE Input Shutdown control (LOW = shutdown, HIGH = active)
6 CAVE I/O Averaging capacitor connection (1µF typical)
7 VOUTRTN Input Output reference pin (output DC level shift)
8 VOUT Output RMS-converted DC output voltage
Application Scenarios: In which products and applications is LTC1966IMS8#PBF used
  • True RMS digital multimeters and handheld panel meters
  • True RMS AC+DC power line voltage and current monitoring
  • Vibration and rumble monitoring for industrial equipment
  • Audio level measurement, compression, and VU metering
  • Battery-powered portable instrumentation
Alternative Models: What chips are recommended as replacements for LTC1966IMS8#PBF
Manufacturer Part Number Package Notes
ADI LTC1967CMS8#PBF MSOP-8 Higher bandwidth (4MHz), 0.1% accuracy
ADI LTC1968CMS8#PBF MSOP-8 Even higher bandwidth (8MHz), faster response
ADI AD736JRZ DIP-8/SOIC-8 Traditional RMS-DC, lower cost, lower accuracy
Microchip MCP3901 SSOP-24 Energy metering IC with RMS computation
ADI LTC1966CMS8#PBF MSOP-8 Commercial temp (0-70°C), lower cost

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1