Opens in a new tab

74HC132D

Quad 2-input NAND Schmitt trigger, 2-6V, SOIC-14

12400

Effective Inventory

Image for reference only

Manufacturer Part:

74HC132D

Package:

SOIC-14 (8.75×3.9×1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74HC132D from Nexperia is a quad 2-input NAND gate with Schmitt trigger inputs. Each of the four gates features hysteresis on its inputs, allowing slow-rising or noisy signals to be cleanly converted to sharp digital outputs. Operating from 2V to 6V supply, it is ideal for signal conditioning, debounce, oscillator, and waveform shaping circuits in digital and mixed-signal designs. Packaged in SOIC-14.

Key Specifications

Logic Family 74HC (High-Speed CMOS)
Function Quad 2-input NAND with Schmitt trigger
Supply Voltage 2V to 6V
Propagation Delay 11 ns typical @ 5V
Hysteresis (VT+ – VT-) 0.6V typical @ 4.5V
Input Current ±1 µA max
Output Drive ±5.2 mA @ 4.5V
Operating Temperature -40°C to +125°C
Package SOIC-14 (3.9mm width)

Features

  • Schmitt trigger inputs with hysteresis for noise immunity
  • Slow edge acceptance: ideal for debouncing and waveform shaping
  • Wide supply range: 2V to 6V
  • Standard 74HC pinout compatible with 74HC00
  • Low power CMOS technology
  • Four independent NAND gates in one package
  • Can be configured as inverter, oscillator, or one-shot

Applications

  • Mechanical switch debounce circuits
  • RC oscillator and clock generator
  • Noisy signal conditioning and squaring
  • Sine-to-square wave conversion
  • Logic level conversion with hysteresis
Product Introduction: 74HC132D Product Introduction

The 74HC132D from Nexperia is a quad 2-input NAND gate with Schmitt trigger inputs providing ~0.6V hysteresis for clean switching on slow or noisy signals. Operating from 2V to 6V with 11 ns propagation delay, it is the standard solution for switch debounce, RC oscillators, waveform shaping, and signal conditioning in digital and mixed-signal designs. The SOIC-14 package uses the same pinout as 74HC00 for easy upgrade.

Working Principle: 74HC132D Working Principle

The 74HC132D contains four independent 2-input NAND gates, each with Schmitt trigger input stages. A Schmitt trigger has two different threshold voltages: VT+ (positive-going) and VT- (negative-going). The difference between them is the hysteresis voltage (~0.6V at 4.5V supply). When the input rises above VT+, the output switches LOW (NAND function). When the input falls below VT-, the output switches HIGH. This hysteresis prevents output oscillation when the input signal is slow-moving or contains noise near the threshold. As a NAND gate, the output is LOW only when both inputs are above their positive thresholds, and HIGH otherwise. The Schmitt trigger inputs allow the device to accept slowly changing signals that would cause conventional gates to oscillate or draw excessive supply current.

Pin Description: 74HC132D Pin Definition and Functions
Pin Name Type Function
1 1A Input Gate 1, input A
2 1B Input Gate 1, input B
3 1Y Output Gate 1, output
4 2A Input Gate 2, input A
5 2B Input Gate 2, input B
6 2Y Output Gate 2, output
7 GND Power Ground
8 3Y Output Gate 3, output
9 3A Input Gate 3, input A
10 3B Input Gate 3, input B
11 4Y Output Gate 4, output
12 4A Input Gate 4, input A
13 4B Input Gate 4, input B
14 VCC Power Supply voltage (2-6V)
Application Scenarios: In which products and applications is 74HC132D used
  • Mechanical switch and push-button debounce circuits
  • RC relaxation oscillator and clock generator
  • Noisy signal squaring and conditioning before MCU input
  • Sine-to-square wave conversion with hysteresis
  • Logic level conversion with noise immunity
Alternative Models: What chips are recommended as replacements for 74HC132D
Manufacturer Part Number Package Notes
TI SN74HC132DR SOIC-14 Direct equivalent from TI
ON Semi MC74HC132ADR2G SOIC-14 Direct equivalent from onsemi
Nexperia 74HCT132D SOIC-14 TTL-compatible input thresholds
Nexperia 74HC14D SOIC-14 Hex Schmitt inverter (no NAND)
TI CD4093BM SOIC-14 CMOS 4000 series, wider supply range

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1