Opens in a new tab

BSP742T

Smart high-side switch, 500mΩ RON, 0.8A, 12V automotive, SO-8

9500

Effective Inventory

Image for reference only

Manufacturer Part:

BSP742T

Package:

PG-DSO-8 / SO-8 (5.0×4.0×1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BSP742T from Infineon Technologies is a Classic PROFET smart high-side power switch integrating an N-channel vertical power FET with charge pump, current limitation, and protection functions. With 0.8A nominal load current and 3A short-circuit current limit in an SO-8 surface-mount package, it provides reliable load switching for automotive and industrial 12V applications with comprehensive fault protection.

Key Specifications

On-State Resistance (RON) 500 mΩ typical @ 25°C
Nominal Load Current (IL) 0.8A @ TC=85°C (all channels active)
Max Load Current 1.1A @ TC=85°C (single channel)
Short Circuit Current Limit 3A (min 2A)
Operating Voltage 5V to 34V (recommended)
Turn-On Time 140 µs max
Turn-Off Time 170 µs max
Operating Temperature -40°C to +150°C (junction)
Total Power Dissipation 1.5W
Qualification AEC-Q100 (automotive)
Package PG-DSO-8 (SO-8)

Features

  • Smart high-side switch with integrated vertical power FET
  • 500 mΩ typical on-resistance
  • Short circuit protection with current limitation (2A min)
  • Overtemperature protection with auto-restart
  • Overvoltage protection (load dump)
  • Reverse battery protection
  • AEC-Q100 qualified for automotive applications
  • Halogen-free and RoHS compliant

Applications

  • Automotive lamp and LED module driving
  • Solenoid and relay driving
  • Industrial load switching (12V/24V)
  • Resistive and capacitive load control
  • Automotive body electronics and ECU
Product Introduction: BSP742T Product Introduction

The BSP742T from Infineon is a Classic PROFET smart high-side power switch with 500 mΩ RON, 0.8A nominal load current, and 3A short-circuit current limit. With integrated charge pump, overtemperature, overvoltage, and reverse battery protection, it provides reliable automotive-grade load switching for lamps, solenoids, and resistive loads in an AEC-Q100 qualified SO-8 package.

Working Principle: BSP742T Working Principle

The BSP742T integrates an N-channel vertical power MOSFET with all necessary control and protection circuitry. An internal charge pump generates a gate voltage above the supply rail to fully enhance the N-channel MOSFET, achieving 500 mΩ on-resistance. The IN pin (active-high) controls the switch state. When a fault occurs (overcurrent, overtemperature, or overvoltage), the device limits current and/or shuts down. Overtemperature protection activates above approximately 170°C junction temperature with auto-restart after cooling. The reverse battery protection prevents damage when the supply polarity is reversed. The 140 µs turn-on time includes the charge pump startup delay, while the 170 µs turn-off time includes the output slew rate limiting for EMC compliance.

Pin Description: BSP742T Pin Definition and Functions
Pin Name Type Function
1 OUT Output Output to load
2 NC — No connect
3,6 GND Power Ground
4 IN Input Logic input (HIGH=on, LOW=off)
5,7,8 Vbb Power Positive supply (5-34V, tab connected)
Application Scenarios: In which products and applications is BSP742T used
  • Automotive lamp and LED module high-side switching
  • Solenoid and relay driving with short circuit protection
  • Industrial 12V/24V load switching with fault protection
  • Resistive and capacitive load control in automotive ECU
  • Automotive body electronics: wiper, mirror, seat heating
Alternative Models: What chips are recommended as replacements for BSP742T
Manufacturer Part Number Package Notes
Infineon BSP752T SO-8 Higher current version (1.4A)
Infineon BTS4140N SOT-223 4A, smaller package, more current
ST VN5T006ASPTR-E SO-8 ST VIPower, similar function
ON Semi NCV8402ADR2G SO-8 2.5A smart high-side switch
Infineon BSP742TXUMA1 SO-8 Tape and reel version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1