Opens in a new tab

SHT30-DIS-B2.5KS

Digital humidity/temp sensor, I2C, ±2%RH, ±0.3°C, DFN-8(2.5×2.5)

11331

Effective Inventory

Image for reference only

Manufacturer Part:

SHT30-DIS-B2.5KS

Package:

DFN-8-EP (2.5 x 2.5 x 0.9 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SHT30-DIS-B2.5KS from Sensirion is a digital humidity and temperature sensor in a DFN-8 (2.5 x 2.5mm) package. Built on Sensirion’s CMOSens technology, it provides factory-calibrated, linearized, and temperature-compensated digital output via I2C interface. With ±2% RH humidity accuracy, ±0.3°C temperature accuracy (typical), 16-bit resolution, 0-100% RH operating range, and 200nA average supply current at 1Hz measurement rate, it combines high precision with ultra-low power consumption for demanding environmental sensing applications.

Key Specifications

Sensor Type Digital Humidity and Temperature
Humidity Accuracy ±2% RH (typical, 10-90% RH at 25°C)
Humidity Range 0% to 100% RH
Humidity Resolution 0.01% RH
Humidity Repeatability 0.10% RH (high repeatability mode)
Temperature Accuracy ±0.3°C (typical, 0°C to 65°C)
Temperature Range -40°C to +125°C
Temperature Resolution 0.015°C
Supply Voltage 2.15V to 5.5V
Average Supply Current 1.7 µA (1Hz measurement, low repeatability)
Max Supply Current 1500 µA (during measurement)
Standby Current 200 nA
Interface I2C (up to 1 MHz)
I2C Addresses 0x44 or 0x45 (pin selectable)
Measurement Time 2.5ms (high repeatability)
Humidity Response Time (τ63%) 8s
Operating Temperature -40°C to +125°C
Package DFN-8 (2.5 x 2.5 x 0.9 mm)

Features

  • Fully calibrated, linearized, and temperature-compensated digital output
  • ±2% RH humidity accuracy and ±0.3°C temperature accuracy (typical)
  • I2C interface with speeds up to 1 MHz
  • Two user-selectable I2C addresses (0x44 / 0x45)
  • Programmable temperature and humidity alert thresholds
  • 16-bit ADC resolution for both humidity and temperature
  • Three repeatability modes: low, medium, high
  • Ultra-low power: 200nA standby, 1.7µA at 1Hz
  • CRC checksum for communication reliability
  • Factory calibration with individual sensor identification

Applications

  • IoT environmental monitoring and smart home sensors
  • HVAC and building automation systems
  • Industrial process humidity and temperature control
  • Weather stations and agricultural monitoring
  • Medical and respiratory equipment
Product Introduction: SHT30-DIS-B2.5KS Product Introduction

The SHT30-DIS-B2.5KS from Sensirion is a digital humidity and temperature sensor built on CMOSens technology in a 2.5×2.5mm DFN-8 package. It provides factory-calibrated, linearized digital output via I2C with ±2% RH humidity accuracy, ±0.3°C temperature accuracy, and 16-bit resolution. With selectable repeatability modes, programmable alert thresholds, two I2C addresses, and ultra-low 200nA standby current, it is designed for IoT environmental monitoring, HVAC, industrial process control, and smart home applications.

Working Principle: SHT30-DIS-B2.5KS Working Principle

The SHT30-DIS-B2.5KS uses Sensirion’s CMOSens technology, which integrates a capacitive humidity sensing element and a bandgap temperature sensor on a single CMOS chip alongside the signal conditioning and A/D conversion circuitry. The capacitive humidity sensor measures relative humidity by detecting changes in the dielectric constant of a polymer layer as it absorbs or desorbs moisture. The bandgap temperature sensor provides a voltage proportional to absolute temperature. Both sensor outputs are digitized by a 16-bit ADC, then processed by the on-chip DSP which applies factory-calibrated linearization and temperature compensation coefficients stored in non-volatile memory. The corrected results are accessible via the I2C interface as 16-bit values for both humidity and temperature. Three repeatability modes trade measurement speed and noise: low (2.5ms, higher noise), medium (4.5ms), and high (12.5ms, lowest noise). The CRC-8 checksum appended to each data word ensures communication integrity. The alert mode can generate an interrupt when humidity or temperature crosses programmed thresholds without requiring I2C polling.

Pin Description: SHT30-DIS-B2.5KS Pin Definition and Functions
Pin Name Type Function
1 SDA I/O I2C Data (open-drain, requires pull-up)
2 ADDR Input I2C Address select (GND = 0x44, VDD = 0x45)
3 ALERT Output Alert output (open-drain, active low)
4 SCL Input I2C Clock (requires pull-up)
5 VDD Power Supply voltage (2.15V to 5.5V)
6 nRESET Input Reset (active low, min 350ns pulse; tie to VDD if unused)
7 R — Reserved (do not connect)
8 VSS Power Ground
Pad EP Power Exposed thermal pad (connect to GND)
Application Scenarios: In which products and applications is SHT30-DIS-B2.5KS used
  • IoT environmental monitoring nodes and smart home sensors
  • HVAC duct and room humidity/temperature control
  • Industrial process monitoring (dryers, humidifiers, clean rooms)
  • Agricultural greenhouse and livestock environment control
  • Medical respiratory and incubator equipment
Alternative Models: What chips are recommended as replacements for SHT30-DIS-B2.5KS
Manufacturer Part Number Package Notes
Sensirion SHT31-DIS-B2.5KS DFN-8 ±2%RH standard version, same footprint
Sensirion SHT35-DIS-B2.5KS DFN-8 ±1.5%RH premium version
Sensirion SHT40-AD1B-R3 DFN-4 Next-gen, smaller 2.5×1.5mm package
TE Connectivity HTU21D DFN-6 ±2%RH, I2C, pin-compatible alternative
Silicon Labs SI7020-A20 DFN-6 ±3%RH, I2C, low-power alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1