Opens in a new tab

UCC3895PW

BiCMOS Phase-Shift PWM Controller, 1MHz, 0-70°C, TSSOP-20

9104

Effective Inventory

Image for reference only

Manufacturer Part:

UCC3895PW

Package:

TSSOP-20 (6.5 x 6.4 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UCC3895PW from Texas Instruments is a BiCMOS advanced phase-shift PWM controller for phase-shifted full-bridge power converters. It is the commercial temperature range (0°C to 70°C) version of the UCC2895, supporting voltage-mode, peak current-mode, or average current-mode control with switching frequencies up to 1 MHz. The device is housed in a 20-pin TSSOP package.

Key Specifications

Topology Phase-Shifted Full Bridge
Control Mode Current, Feedforward, Voltage
Switching Frequency Up to 1 MHz
Max Duty Cycle 100%
Supply Voltage 10 V to 16.5 V
UVLO Threshold (On/Off) 11 V / 9 V
Error Amp Bandwidth 7 MHz
Operating Current 5 mA typical at 500 kHz
Start-up Current 150 µA
Package TSSOP-20 (6.5 x 6.4 mm)
Operating Temperature 0°C to 70°C

Features

  • Programmable output turn-on delay for ZVS operation
  • Adaptive delay set (ADS) for optimized switching
  • Bidirectional oscillator synchronization
  • Voltage-mode, peak current-mode, or average current-mode control
  • Programmable soft start, soft stop, and chip disable
  • 0% to 100% duty-cycle control
  • 7-MHz error amplifier
  • BCDMOS process for low supply current

Applications

  • Phase-shifted full-bridge DC-DC converters
  • Server and telecom power supplies
  • Industrial power systems
  • High-density power architectures
  • Battery charger systems
Product Introduction: UCC3895PW Product Introduction

The UCC3895PW is a BiCMOS advanced phase-shift PWM controller from Texas Instruments designed for full-bridge power converter applications. It is functionally identical to the UCC2895 but specified for the 0°C to 70°C commercial temperature range. The device controls a full-bridge power stage by phase-shifting the switching of one half-bridge relative to the other, enabling constant-frequency PWM with resonant zero-voltage switching for high efficiency. The UCC3895 maintains compatibility with the UC3875/6/7/8 family while adding enhanced control logic, adaptive delay set, and shutdown capability. The BCDMOS process significantly reduces supply current compared to bipolar alternatives.

Working Principle: UCC3895PW Working Principle

The UCC3895PW generates four complementary output drive signals (OUTA/B and OUTC/D) for the two half-bridge legs of a full-bridge converter. Phase shift between the two legs controls power transfer. An external RT resistor programs the oscillator frequency (up to 1 MHz), while an external CT capacitor sets the timing ramp. The error amplifier (7 MHz GBW) processes the output voltage feedback. Programmable delays (DELAB/DELCD) between complementary output pairs enable ZVS transitions. The ADS pin allows adaptive delay modulation based on load conditions. Current-mode control is implemented via the CS and RAMP pins. The SS/DISB pin combines soft-start and shutdown functionality.

Pin Description: UCC3895PW Pin Definition and Functions
Pin Name Type Function
1 DELAB Output Delay set for A-B leg
2 DELCD Output Delay set for C-D leg
3 ADS Input Adaptive delay set
4 EA+ Input Error amplifier non-inverting input
5 EA- Input Error amplifier inverting input
6 COMP Output Error amplifier output
7 SS/DISB I/O Soft start / disable
8 RT Output Oscillator timing resistor
9 CT I/O Oscillator timing capacitor
10 SYNC I/O Oscillator synchronization
11 RAMP Input PWM comparator inverting input
12 CS Input Current sense input
13 REF Output 5V reference (1.2%)
14 OUTA Output Output driver A
15 OUTB Output Output driver B
16 PGND Ground Output stage ground
17 OUTC Output Output driver C
18 OUTD Output Output driver D
19 VDD Power Supply voltage
20 GND Ground Chip ground
Application Scenarios: In which products and applications is UCC3895PW used
  • Commercial DC-DC converters with phase-shifted full-bridge topology
  • Server power supplies requiring high efficiency
  • Telecom rectifiers and bus converters
  • Industrial power systems with ZVS requirements
  • Battery charging and power management systems
Alternative Models: What chips are recommended as replacements for UCC3895PW
Manufacturer Part Number Package Notes
Texas Instruments UCC2895PW TSSOP-20 -40°C to 85°C version
Texas Instruments UCC28950PW TSSOP-24 Enhanced with synchronous rectification
Texas Instruments UCC3895DW SOIC-20 SOIC package option
Infineon ICE2HS01G DSO-14 LLC half-bridge controller
STMicroelectronics L6612 SO-16 Full-bridge controller alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1