Opens in a new tab

LPC3250FET296/01

ARM926EJ-S 266MHz MCU, 256KB SRAM, VFP, USB OTG, Ethernet, LCD, TFBGA-296

2870

Effective Inventory

Image for reference only

Manufacturer Part:

LPC3250FET296/01

Package:

TFBGA-296 (15 x 15 x 0.7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LPC3250FET296/01 from NXP Semiconductors is a 16/32-bit ARM926EJ-S microcontroller operating at CPU frequencies up to 266 MHz. It features 256 KB of on-chip SRAM, a vector floating-point (VFP) coprocessor, Ethernet MAC, USB 2.0 OTG, LCD controller, NAND flash interface, and a comprehensive set of serial communication peripherals in a 296-pin TFBGA package.

Key Specifications

CPU Core ARM926EJ-S with VFP coprocessor
Max CPU Frequency 266 MHz
On-Chip SRAM 256 KB
Instruction/Data Cache 32 KB / 32 KB
MMU Yes (Virtual Memory)
Ethernet MAC 10/100 MII/RMII
USB 2.0 OTG (Full-Speed)
UARTs 7 (4 standard + 3 high-speed)
LCD Controller STN/TFT up to 1024×768
ADC 10-bit, 3-channel, 400 kHz
Package TFBGA-296 (15 x 15 x 0.7 mm)
Operating Voltage 1.2V/1.8V/2.5V/3.3V
Operating Temperature -40°C to 85°C

Features

  • ARM926EJ-S core with DSP extensions and Jazelle Java acceleration
  • Vector Floating Point (VFP) coprocessor for hardware floating-point
  • 32 KB instruction cache and 32 KB data cache
  • 256 KB on-chip SRAM
  • External memory controller supporting SDR/DDR SDRAM and static devices
  • Dual NAND flash controllers (SLC and MLC)
  • 10/100 Ethernet MAC with dedicated DMA
  • USB 2.0 OTG with dedicated PLL
  • LCD controller supporting STN and TFT panels up to 1024×768
  • 7 UARTs, 2 I2C, 2 SPI/SSP, 2 I2S interfaces

Applications

  • Industrial control and automation systems
  • Networking equipment and gateways
  • Consumer electronics with LCD displays
  • Medical devices with high-resolution UI
  • Embedded Linux and RTOS applications
Product Introduction: LPC3250FET296/01 Product Introduction

The LPC3250FET296/01 from NXP is a high-performance 16/32-bit ARM926EJ-S microcontroller built on a 90nm process for low power consumption. It features a vector floating-point coprocessor and 256 KB of on-chip SRAM with separate 32 KB instruction and data caches. The device integrates a rich peripheral set including 10/100 Ethernet MAC, USB 2.0 OTG, LCD controller supporting STN and TFT displays up to 1024×768, dual NAND flash controllers, and an external memory controller for SDR/DDR SDRAM. With seven UARTs, dual I2C, SPI/SSP, and I2S interfaces, it is well-suited for complex embedded applications requiring Linux or advanced RTOS support.

Working Principle: LPC3250FET296/01 Working Principle

The LPC3250FET296/01 is centered around an ARM926EJ-S CPU core with a 5-stage Harvard pipeline and integral MMU supporting virtual memory for multi-programming operating systems. The VFP coprocessor handles IEEE 754 floating-point operations in hardware. A multi-layer AHB bus matrix provides separate buses for CPU instruction fetch, CPU data access, DMA controller, USB controller, LCD controller, and Ethernet MAC, minimizing arbitration delays. The external memory controller interfaces with SDR/DDR SDRAM and static devices. Two NAND flash controllers support both SLC and MLC devices. The LCD controller has its own DMA engine for display refresh. The USB OTG controller includes a dedicated PLL for the 48 MHz USB clock. Power management includes stop mode with peripheral wake-up capability.

Pin Description: LPC3250FET296/01 Pin Definition and Functions
Pin Group Name Type Function
A1-A8 VDD_CORE Power 1.2V core supply
B1-B12 GND Ground Ground connections
C1-C16 VDD_IO Power 1.8V/2.5V/3.3V I/O supply
D1-D20 P0-P3 GPIO GPIO General purpose I/O with alternate functions
E1-E8 EMC_ADDR/DATA I/O External memory controller bus
F1-F6 ENET_TX/RX I/O Ethernet MII/RMII interface
G1-G4 USB_DP/DM I/O USB data lines
H1-H8 LCD_DATA/CTRL Output LCD pixel data and control signals
J1-J6 UART_TX/RX I/O Serial communication ports
Application Scenarios: In which products and applications is LPC3250FET296/01 used
  • Industrial control systems with Ethernet and LCD HMI
  • Network gateways and routers with USB and Ethernet
  • Consumer electronics with high-resolution display interfaces
  • Medical instruments requiring floating-point computation
  • Embedded Linux applications with NAND flash boot
Alternative Models: What chips are recommended as replacements for LPC3250FET296/01
Manufacturer Part Number Package Notes
NXP LPC3250FET296 TFBGA-296 Non-automotive grade variant
NXP LPC3240FET296 TFBGA-296 Without VFP coprocessor
NXP LPC4357FET256 TFBGA-256 Dual-core M4/M0, newer family
STMicroelectronics STM32MP157CAC LQFP-448 Dual-core A7/M4, MPU class
Microchip ATSAMA5D36A-CU BGA-324 ARM A5 MPU with Ethernet

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1