Opens in a new tab

TPS54335ADDAR

4.5-28V Input, 3A Synchronous Buck Converter, Eco-mode, 1.5MHz, HSOIC-8

7385

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54335ADDAR

Package:

HSOIC-8 DDA with PowerPAD (4.9 x 6.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54335ADDAR from Texas Instruments is a 4.5 V to 28 V input, 3 A output synchronous step-down (buck) DC-DC converter with integrated 128 mOhm and 84 mOhm MOSFETs. It features Eco-mode for light-load efficiency, adjustable switching frequency from 50 kHz to 1.5 MHz, and a fixed 2 ms soft-start. The device is housed in an 8-pin HSOIC (DDA) package with PowerPAD for enhanced thermal performance.

Key Specifications

Topology Synchronous Buck
Input Voltage 4.5 V to 28 V
Output Voltage 0.8 V to 24 V (Adjustable)
Output Current 3 A
Switching Frequency 50 kHz to 1.5 MHz (Adjustable)
Reference Voltage 0.8 V (±0.8%)
High-Side FET RDS(on) 128 mOhm
Low-Side FET RDS(on) 84 mOhm
Shutdown Current 2 µA
Operating IQ 310 µA (typical, not switching)
Package HSOIC-8 DDA (4.9 x 6.0 mm)
Operating Temperature -40°C to 150°C

Features

  • Integrated 128 mOhm and 84 mOhm MOSFETs for high efficiency
  • Adjustable switching frequency: 50 kHz to 1.5 MHz
  • Internal 2 ms soft-start
  • Eco-mode pulse skipping for light-load efficiency
  • 0.8 V reference with ±0.8% accuracy over temperature
  • Current-mode control for simplified compensation
  • Monotonic startup into pre-biased outputs
  • Hiccup mode overcurrent protection
  • Thermal shutdown (TSD) and overvoltage protection
  • Integrated boot recharge diode

Applications

  • Consumer electronics (set-top boxes, digital TV, routers)
  • Battery charging systems
  • Industrial and automotive audio power supplies
  • 5 V, 12 V, 24 V distributed power bus systems
  • Low-power FPGA and processor core supplies
Product Introduction: TPS54335ADDAR Product Introduction

The TPS54335ADDAR is a 28 V, 3 A synchronous step-down buck converter from Texas Instruments featuring integrated N-channel MOSFETs (128 mOhm high-side, 84 mOhm low-side). The device uses peak current-mode control for simplified frequency compensation and fast transient response. An adjustable switching frequency (50 kHz to 1.5 MHz) enables optimization for efficiency or solution size. Eco-mode pulse skipping maintains high efficiency at light loads by reducing switching losses. The integrated boot recharge diode minimizes external component count. Comprehensive protection features include cycle-by-cycle current limiting, hiccup mode overcurrent protection, thermal shutdown, and overvoltage transition protection.

Working Principle: TPS54335ADDAR Working Principle

The TPS54335ADDAR uses a constant-frequency peak current-mode control architecture. The internal oscillator sets the switching frequency based on an external RT resistor. During each switching cycle, the high-side MOSFET turns on and current ramps through the inductor. When the peak current reaches the level set by the error amplifier output, the high-side MOSFET turns off and the low-side MOSFET turns on, allowing inductor current to freewheel. An internal transconductance error amplifier compares the divided output voltage to the 0.8 V reference and generates the COMP control signal. The BOOT pin provides gate drive voltage for the high-side MOSFET via an external bootstrap capacitor. Eco-mode disables the low-side MOSFET switching when the inductor current approaches zero at light loads, reducing switching losses and improving efficiency.

Pin Description: TPS54335ADDAR Pin Definition and Functions
Pin Name Type Function
1 BOOT Power Bootstrap capacitor for high-side driver
2 VIN Power Input voltage supply
3 EN Input Enable (active high, internal pullup)
4 SS Input Soft-start / frequency sync
5 VSENSE Input Output voltage feedback
6 COMP Output Error amplifier output / compensation
7 GND Ground Signal and power ground
8 PH Output Phase node (switching output)
Pad GND Ground PowerPAD thermal and electrical ground
Application Scenarios: In which products and applications is TPS54335ADDAR used
  • Set-top box and digital TV power supplies (5V, 3.3V rails)
  • Consumer electronics with 12V or 24V input buses
  • Battery charger and portable device power management
  • Industrial control systems with distributed power architecture
  • Networking equipment (CPE, Wi-Fi routers, cable modems)
Alternative Models: What chips are recommended as replacements for TPS54335ADDAR
Manufacturer Part Number Package Notes
Texas Instruments TPS54336ADDAR HSOIC-8 Fixed 340 kHz, adjustable soft-start
Texas Instruments TPS54332DDAR HSOIC-8 4.5-28V, 3A, lower frequency range
Monolithic Power MP1584EN-LF-Z SOIC-8 4.5-28V, 3A, 1.5MHz
Richtek RT8279GSP SOP-8 4.5-36V, 3A buck
onsemi NCV51411DR2G SOIC-8 4.5-40V, 1.5A automotive buck

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1