Opens in a new tab

BTS452R

Classic PROFET 24V High-Side Switch, 200mOhm, 2.2A, DPAK-5, AEC-Q100

5892

Effective Inventory

Image for reference only

Manufacturer Part:

BTS452R

Package:

PG-TO252-5 (DPAK-5, 6.5 x 5.7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTS452R from Infineon Technologies is a smart high-side power switch from the Classic PROFET 24V family. It integrates a vertical power FET with embedded protection and diagnostic functions, supporting 24V automotive and truck applications. The device features 200 mOhm on-resistance, 2.2 A nominal load current, and a diagnostic status feedback pin in a PG-TO252-5 (DPAK-5) package.

Key Specifications

Type Smart High-Side Power Switch
Channels 1
On-Resistance 200 mOhm (typical)
Nominal Load Current 2.2 A
Short Circuit Current 6.5 A
Current Limit (min) 4 A
Operating Voltage 6 V to 52 V
Turn-On Time (max) 180 µs
Turn-Off Time (max) 200 µs
Power Dissipation 41.6 W
Package PG-TO252-5 (DPAK-5)
Operating Temperature -40°C to 150°C
Qualification AEC-Q100

Features

  • Overload and short circuit protection with current limitation
  • Thermal shutdown with automatic restart
  • Overvoltage protection including load dump
  • Undervoltage shutdown
  • Fast demagnetization of inductive loads
  • Reverse battery protection with external resistor
  • Open drain diagnostic (ST) output for fault status
  • Open load detection in OFF state
  • CMOS compatible input
  • ESD protection

Applications

  • 24V truck and agricultural vehicle systems
  • Automotive lighting control
  • Body control modules
  • Seat control and decentralized mirror modules
  • HEV battery management systems
Product Introduction: BTS452R Product Introduction

The BTS452R from Infineon Technologies is a Classic PROFET 24V smart high-side power switch designed for 24V automotive and truck applications. It integrates a vertical power MOSFET with comprehensive protection and diagnostic functions. The device provides overload protection, current limitation, short circuit protection, thermal shutdown with restart, and overvoltage protection including load dump events. An open-drain status (ST) pin reports fault conditions such as overtemperature and short circuit. The device supports fast demagnetization of inductive loads and features very low standby current for battery-conscious applications in commercial vehicles.

Working Principle: BTS452R Working Principle

The BTS452R integrates a vertical N-channel power MOSFET with a charge pump gate driver that enables high-side switching. The charge pump generates sufficient gate voltage above the supply rail to fully enhance the MOSFET. An internal voltage regulator provides the logic supply voltage. Protection circuits include current limiting during overload, thermal shutdown with hysteresis and automatic restart, and overvoltage clamping. The status (ST) pin is an open-drain output that pulls low during fault conditions (overtemperature, short circuit). An internal level shifter translates logic-level input signals to the high-side gate driver domain. The output clamp circuit provides fast demagnetization of inductive loads by clamping the output voltage during turn-off transients.

Pin Description: BTS452R Pin Definition and Functions
Pin Name Type Function
1 GND Ground Logic ground
2 IN Input Logic input (CMOS compatible)
3 VBB Power Supply voltage (battery)
4 ST Output Status feedback (open drain)
5 OUT Output Power output to load
Tab VBB Power Supply voltage (thermal tab)
Application Scenarios: In which products and applications is BTS452R used
  • 24V truck and commercial vehicle power distribution
  • Agricultural vehicle lighting and actuator control
  • Body control modules in 24V automotive systems
  • HEV main battery pack management
  • Industrial 24V load switching with diagnostics
Alternative Models: What chips are recommended as replacements for BTS452R
Manufacturer Part Number Package Notes
Infineon BTS452T TO-252-5 No status pin variant
Infineon BTS428L2 TO-252-5 PROFET+ 24V, lower RDS(on)
STMicroelectronics VND5E160AJ SO-8 24V high-side switch, VIPower
onsemi NCV8460DR2G SOIC-8 24V high-side switch with diagnostics
Bosch CG241 TO-252-5 Smart high-side, 24V compatible

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1