Opens in a new tab

LTC3414EFE#PBF

4A 4MHz Monolithic Synchronous Buck Regulator, 2.25-5.5V in, 95% Eff, TSSOP-20

5312

Effective Inventory

Image for reference only

Manufacturer Part:

LTC3414EFE#PBF

Package:

TSSOP-20 EP (6.6 x 4.5 x 1.05 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC3414EFE#PBF from Analog Devices is a 4 A, 4 MHz monolithic synchronous step-down regulator with 67 mOhm internal switch. It operates from 2.25 V to 5.5 V input, delivers up to 4 A output current with adjustable output from 0.8 V to 5 V, and achieves up to 95% efficiency. The device features selectable Burst Mode or forced continuous operation in a 20-lead TSSOP package with exposed pad.

Key Specifications

Topology Monolithic Synchronous Buck
Input Voltage 2.25 V to 5.5 V
Output Voltage 0.8 V to 5 V (Adjustable)
Output Current 4 A
Switching Frequency 300 kHz to 4 MHz (Programmable)
Internal Switch RDS(on) 67 mOhm (top + bottom)
Efficiency Up to 95%
Quiescent Current 64 µA
Reference Voltage 0.8 V (±2%)
Package TSSOP-20 EP (6.6 x 4.5 mm)
Operating Temperature -40°C to 85°C

Features

  • 4 A output current with internal 67 mOhm synchronous switch
  • Programmable frequency: 300 kHz to 4 MHz
  • Selectable Burst Mode or forced continuous operation
  • Adjustable burst clamp for output ripple control
  • Synchronizable switching frequency
  • 100% duty cycle for low dropout operation

Applications

  • Point-of-load regulation in distributed power systems
  • Notebook computer power supplies
  • Portable instruments and battery-powered devices
  • FPGA and processor core voltage regulation
  • Telecom and networking equipment
Product Introduction: LTC3414EFE#PBF Product Introduction

The LTC3414EFE#PBF from Analog Devices is a high-efficiency monolithic synchronous step-down DC/DC converter utilizing a constant-frequency current-mode architecture. It operates from 2.25 V to 5.5 V input and provides a regulated output from 0.8 V to 5 V at up to 4 A. The internal 67 mOhm synchronous power switch eliminates the need for an external Schottky diode, increasing efficiency. Switching frequency is programmable from 300 kHz to 4 MHz via an external resistor and can be synchronized to an external clock. The device supports Burst Mode operation with adjustable burst clamp for high efficiency at light loads, or forced continuous operation for reduced noise. OPTI-LOOP compensation optimizes transient response across a wide range of loads and output capacitors.

Working Principle: LTC3414EFE#PBF Working Principle

The LTC3414EFE#PBF uses a constant-frequency current-mode control architecture. An internal oscillator sets the switching frequency (300 kHz to 4 MHz) based on the external RT resistor. The top and bottom internal MOSFET switches (67 mOhm combined) alternate to step down the input voltage. Current-mode control simplifies loop compensation and provides inherent current limiting. In Burst Mode, the device delivers energy in controlled bursts and enters sleep mode between bursts, reducing gate charge losses at light loads. The burst clamp level is set via the SYNC/MODE pin voltage, allowing the user to trade off between output ripple and efficiency. In forced continuous mode, the device switches continuously regardless of load, reducing output ripple and noise. The 100% duty cycle mode enables low dropout operation by keeping the top switch on continuously.

Pin Description: LTC3414EFE#PBF Pin Definition and Functions
Pin Name Type Function
1 RUN Input Enable / run control
2 ITH I/O Error amplifier compensation
3 VFB Input Feedback voltage (0.8V reference)
4 SGND Ground Signal ground
5-6 SW Output Switch node
7-8 PGND Ground Power ground
9 PGOOD Output Power good indicator
10 BST Power Bootstrap for top switch
11-12 SVIN Power Signal input supply
13 PVIN Power Power input supply
14 SVIN Power Signal input supply
15 RT Input Frequency set resistor
16 SYNC/MODE I/O External sync / mode control
17 TR/SS I/O Soft-start / tracking
18 SGND Ground Signal ground
19-20 NC – No connect
Application Scenarios: In which products and applications is LTC3414EFE#PBF used
  • Point-of-load DC-DC conversion in distributed power systems
  • Notebook and laptop computer core and I/O voltage regulation
  • Portable instruments with battery operation
  • FPGA and DSP core voltage supplies (1.2V, 1.8V, 2.5V)
  • Networking and telecom equipment POL converters
Alternative Models: What chips are recommended as replacements for LTC3414EFE#PBF
Manufacturer Part Number Package Notes
Analog Devices LTC3414IFE#PBF TSSOP-20 EP -40°C to 125°C I-grade
Analog Devices LTC3412EFE#PBF TSSOP-20 EP 2.5A version, same family
Texas Instruments TPS62150RGTR QFN-16 3A, 4MHz, 3-17V input
Monolithic Power MP8860DN-LF-Z QFN-22 8A, 4MHz, synchronous buck
Richtek RT8012AGQW WQFN-20 4A, 1.5MHz, synchronous buck

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1