Opens in a new tab

HIP4082IBZT

80V Full-Bridge N-Channel MOSFET Driver, 2.5A, prog dead-time, SOIC-20

4267

Effective Inventory

Image for reference only

Manufacturer Part:

HIP4082IBZT

Package:

SOIC-20 (12.8 x 7.5 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HIP4082IBZT from Renesas Electronics (formerly Intersil) is a 80 V N-channel MOSFET full-bridge driver IC designed for motor drive and switching power applications. It features programmable dead-time, under-voltage lockout, and shoot-through protection in a 20-lead SOIC package.

Key Specifications

Type Full-Bridge MOSFET Driver
Maximum Supply Voltage 80 V
Drive Configuration Full H-Bridge (4 N-ch MOSFETs)
Peak Output Current 2.5 A (source/sink)
Switching Frequency Up to 1 MHz
Dead Time Programmable (external resistor)
Rise Time 30 ns (typical, 1nF load)
Fall Time 25 ns (typical, 1nF load)
Supply Current (quiescent) 8 mA (typical)
Package SOIC-20 (12.8 x 7.5 mm)
Operating Temperature -40°C to 85°C

Features

  • Full-bridge driver for four N-channel MOSFETs
  • Integrated bootstrap and charge pump for high-side drive
  • Programmable dead-time prevents shoot-through
  • Under-voltage lockout (UVLO) protection
  • Shoot-through protection logic
  • PWM or direct phase/enable control inputs

Applications

  • Brushed and brushless DC motor drives
  • Full-bridge switching power converters
  • Audio class-D amplifier output stages
  • Stepper motor and servo drives
  • High-current solenoid and actuator drives
Product Introduction: HIP4082IBZT Product Introduction

The HIP4082IBZT from Renesas Electronics (formerly Intersil) is an 80 V full-bridge driver IC designed to drive four N-channel MOSFETs in an H-bridge configuration. The device integrates charge pumps for high-side gate drive and bootstrap capacitors for each half-bridge. Programmable dead-time via an external resistor prevents shoot-through currents. The driver supports both PWM and direct phase/enable control modes. Under-voltage lockout (UVLO) and shoot-through protection logic ensure safe operation. The 2.5 A peak output current capability enables driving large MOSFETs with low switching losses. The device is suitable for motor drive, class-D audio, and full-bridge power conversion applications.

Working Principle: HIP4082IBZT Working Principle

The HIP4082IBZT drives four N-channel MOSFETs in a full H-bridge configuration. Two half-bridge drivers are integrated, each consisting of a high-side driver (for the high-side MOSFET) and a low-side driver. The high-side drivers use bootstrap capacitors charged through internal diodes to provide gate drive voltage above the supply rail. An internal charge pump maintains the bootstrap voltage during extended on-times. The programmable dead-time circuit inserts a delay between turning off one MOSFET and turning on the complementary MOSFET in each half-bridge leg, preventing shoot-through. Input logic can be configured for direct PWM control or phase/enable mode. UVLO disables all outputs when the supply voltage is below the minimum threshold.

Pin Description: HIP4082IBZT Pin Definition and Functions
Pin Name Type Function
1 BHB Power Bootstrap B high-side
2 BHI_B Input Bridge B high-side input
3 DIS Input Disable (active high)
4 BHI_A Input Bridge A high-side input
5 BHA Power Bootstrap A high-side
6 HO_A Output High-side gate drive output A
7 VCC Power Logic supply (12V typ)
8 VS_A Power High-side return A
9 LO_A Output Low-side gate drive output A
10 VSS Ground Ground
11 LO_B Output Low-side gate drive output B
12 VS_B Power High-side return B
13 HO_B Output High-side gate drive output B
14 HDEL Input High-side delay (dead-time) adjust
15 LDEL Input Low-side delay (dead-time) adjust
16 ALO Input A low-side input
17 BLO Input B low-side input
18 VDD Power Power supply (up to 80V)
19 BHB Power Bootstrap B high-side
20 BHA Power Bootstrap A high-side
Application Scenarios: In which products and applications is HIP4082IBZT used
  • Brushed and BLDC motor drive H-bridge circuits
  • Full-bridge DC-DC converters and inverters
  • Class-D audio amplifier output stages
  • Stepper motor driver applications
  • Solenoid and actuator high-current drive circuits
Alternative Models: What chips are recommended as replacements for HIP4082IBZT
Manufacturer Part Number Package Notes
Renesas HIP4081AIBZ SOIC-20 Half-bridge driver, same family
Infineon IRS2453DPBF DIP-14 Full-bridge driver, 200V
Texas Instruments DRV8323RSRGZT QFN-40 Three-phase BLDC gate driver
Allegro A4940KJPTR-T LQFP-48 Three-phase MOSFET driver
STMicroelectronics L6398D SOIC-16 Half-bridge gate driver, 600V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1