Opens in a new tab

TPS72012DRVR

350mA LDO, 1.2V Fixed, 110mV VDO, 80dB PSRR, 38uA IQ, WSON-6

11234

Effective Inventory

Image for reference only

Manufacturer Part:

TPS72012DRVR

Package:

WSON-6 (2 x 2 x 0.75 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS72012DRVR from Texas Instruments is a 350 mA ultra-low VIN RF low-dropout linear regulator with a bias pin. It features 1.2 V fixed output, 38 µA quiescent current, 80 dB PSRR, and 110 mV dropout at full load in a tiny 6-pin WSON package.

Key Specifications

Type Low-Dropout Linear Regulator (LDO)
Output Voltage 1.2 V (Fixed)
Output Current 350 mA
Input Voltage (VIN) 1.1 V to 4.5 V
Bias Voltage (VBIAS) 1.4 V above VOUT min
Dropout Voltage 110 mV @ 350 mA
Quiescent Current 38 µA
PSRR (VIN) 80 dB (10 Hz to 10 kHz)
Output Noise 48 µVRMS (10 Hz to 100 kHz)
Soft Start Built-in, 140 µs start-up
Package WSON-6 (2 x 2 mm)
Operating Temperature -40°C to 125°C

Features

  • 350 mA output current with ultra-low VIN (1.1 V min)
  • Dual-rail architecture: VIN for power path, VBIAS for control
  • 38 µA low quiescent current
  • 80 dB PSRR for noise-sensitive RF applications
  • Built-in soft start with monotonic VOUT rise
  • Regulates under light loads when IN pin is floating
  • Overcurrent and thermal protection
  • Stable with 2.2 µF ceramic output capacitor

Applications

  • RF and wireless connectivity power supplies
  • Post-regulation from DC-DC converters
  • Portable and battery-powered devices
  • Digital cameras and camera phones
  • Handheld instruments
Product Introduction: TPS72012DRVR Product Introduction

The TPS72012DRVR from Texas Instruments is a 350 mA dual-rail low-dropout linear regulator with a fixed 1.2 V output. The dual-rail architecture separates the power input (VIN) from the bias supply (VBIAS), allowing VIN to operate as low as VOUT + VDO (1.1 V minimum) while VBIAS powers the control circuitry. This configuration maximizes efficiency in systems where VIN comes from a high-efficiency DC-DC converter. The device delivers 80 dB PSRR and 48 µVRMS output noise, making it ideal for RF and noise-sensitive applications. Built-in soft start ensures monotonic output rise with inrush current limited to 100 mA plus load current. The unique light-load regulation feature maintains output even when the IN pin is floating, sourcing current from VBIAS.

Working Principle: TPS72012DRVR Working Principle

The TPS72012DRVR uses a dual-rail LDO architecture where VIN carries the main load current and VBIAS powers the internal control circuitry (error amplifier, bandgap reference, protection circuits). The error amplifier compares the feedback voltage from the internal resistor divider against the bandgap reference (0.5 V) and drives the pass transistor to regulate the output at 1.2 V. The P-channel MOSFET pass element allows low dropout operation. The bias rail enables the control circuit to function even when VIN is very close to VOUT. The integrated soft-start circuit limits inrush current during power-up. Overcurrent protection limits the pass transistor gate drive when output current exceeds the safe threshold. Thermal shutdown disables the output when junction temperature exceeds 160°C. The enable pin allows the device to be shut down, reducing current to less than 1 µA.

Pin Description: TPS72012DRVR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input supply voltage (1.1-4.5V)
2 GND Ground Ground
3 EN Input Enable (active high)
4 BIAS Power Bias supply voltage
5 OUT Output Regulated 1.2V output
6 PG Output Power good (open drain)
Pad GND Ground Exposed thermal pad
Application Scenarios: In which products and applications is TPS72012DRVR used
  • RF power amplifier and transceiver supply regulation
  • Post-DC-DC LDO for noise-sensitive analog/RF circuits
  • Portable devices requiring ultra-low standby current
  • Camera module and image sensor power supplies
  • Bluetooth/Wi-Fi module clean power rails
Alternative Models: What chips are recommended as replacements for TPS72012DRVR
Manufacturer Part Number Package Notes
Texas Instruments TPS72018DRVR WSON-6 1.8V output variant
Texas Instruments TPS73633DBVR SOT-23-5 3.3V, 400mA, low noise
Analog Devices LT3008ETS8-1.2#TRPBF TSOT-23-8 1.2V, 300mA, 3µA IQ
Microchip MCP1824T-1202E/OT SOT-23-5 1.2V, 300mA LDO
onsemi NCP511SN120T1G TSOP-5 1.2V, 150mA, low noise

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1