Opens in a new tab

ATMEGA162-16AU

8-bit AVR MCU, 16MHz, 16KB Flash, 1KB SRAM, Dual USART, SPI, JTAG, TQFP-44

8632

Effective Inventory

Image for reference only

Manufacturer Part:

ATMEGA162-16AU

Package:

TQFP-44 (10 x 10 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ATMEGA162-16AU from Microchip Technology is an 8-bit AVR RISC microcontroller with 16 KB ISP flash, 1 KB SRAM, 512 bytes EEPROM, dual USART, SPI, JTAG debug, and 35 I/O lines in a TQFP-44 package operating up to 16 MHz.

Key Specifications

Core AVR 8-bit RISC
Max Frequency 16 MHz (16 MIPS)
Flash Memory 16 KB
SRAM 1 KB
EEPROM 512 bytes
I/O Pins 35
Timers 2x 8-bit, 2x 16-bit
PWM Channels 6
Communication 2x USART, SPI, JTAG
Comparator 1
Operating Voltage 2.7 V to 5.5 V
Package TQFP-44 (10 x 10 mm)
Operating Temperature -40°C to 85°C

Features

  • 131 powerful instructions with most single-clock cycle execution
  • 32 x 8 general purpose working registers
  • 16 MIPS throughput at 16 MHz
  • Dual programmable serial USARTs
  • Master/Slave SPI serial interface
  • JTAG interface for boundary-scan and on-chip debug
  • 6 PWM channels
  • 5 sleep modes for power management
  • Boot loader support with read-while-write

Applications

  • Industrial control and automation
  • Communication bridge and protocol conversion
  • Motor control and power management
  • Consumer electronics and home appliances
  • Embedded systems with dual serial ports
Product Introduction: ATMEGA162-16AU Product Introduction

The ATMEGA162-16AU from Microchip Technology is a high-performance, low-power 8-bit AVR RISC microcontroller combining 16 KB of in-system programmable flash, 1 KB SRAM, and 512 bytes of EEPROM. The device supports throughput approaching 16 MIPS at 16 MHz by executing most instructions in a single clock cycle. It features dual programmable USARTs, a Master/Slave SPI interface, and a JTAG interface for on-chip debugging and boundary-scan. With 35 programmable I/O lines, six PWM channels, and multiple timer/counter options, the ATmega162 is well-suited for communication-intensive embedded applications.

Working Principle: ATMEGA162-16AU Working Principle

The ATMEGA162-16AU uses the AVR enhanced RISC architecture with 131 instructions, most executing in a single clock cycle. The 32 general-purpose working registers are directly connected to the ALU, allowing two independent registers to be accessed in one instruction. The Harvard architecture separates program and data memory spaces. The 16 KB flash stores program code and supports in-system programming (ISP) and self-programming via a boot loader section. Dual USARTs provide independent asynchronous serial communication channels with full duplex capability. The SPI interface supports master and slave modes for high-speed synchronous communication. The JTAG interface provides access to boundary-scan testing and on-chip debugging without requiring external emulator hardware. Power management modes include Idle, Power-save, Power-down, Standby, and Extended Standby.

Pin Description: ATMEGA162-16AU Pin Definition and Functions
Pin Group Name Type Function
1-8 PA0-PA7 I/O Port A: General I/O, external memory
9-16 PB0-PB7 I/O Port B: SPI, Timer, PWM, AIN
17-24 PC0-PC7 I/O Port C: JTAG, external memory
25-32 PD0-PD7 I/O Port D: USART0, USART1, INT
33-35 PE0-PE2 I/O Port E: PWM, AIN, INT
36 RESET Input Active low reset
37,38 VCC,GND Power Supply and ground
39,40 XTAL1/2 I/O Oscillator pins
41-44 AVCC,AREF,GND Power Analog supply and reference
Application Scenarios: In which products and applications is ATMEGA162-16AU used
  • Dual serial port communication bridge and gateway
  • Industrial control with JTAG debug capability
  • Motor drive control with multiple PWM outputs
  • Protocol conversion between UART and SPI buses
  • Embedded systems requiring ISP field firmware updates
Alternative Models: What chips are recommended as replacements for ATMEGA162-16AU
Manufacturer Part Number Package Notes
Microchip ATMEGA162-16PU PDIP-40 Through-hole version
Microchip ATMEGA164A-AU TQFP-44 Newer, 16KB, ADC, pin-compatible
Microchip ATMEGA324P-20AU TQFP-44 32KB Flash, more peripherals
STMicroelectronics STM8S207CBT6 LQFP-48 8-bit, 128KB, UART x3
NXP LPC2103FHN48 LQFP-48 ARM7, 32KB Flash, UART x2

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1