Opens in a new tab

CLRC66303HNE

Multi-protocol NFC Frontend, ISO14443/FeliCa/ISO15693, SPI/I2C/UART, HVQFN-32

4523

Effective Inventory

Image for reference only

Manufacturer Part:

CLRC66303HNE

Package:

HVQFN-32 (5 x 5 x 0.9 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CLRC66303HNE from NXP Semiconductors is a high-performance multi-protocol NFC frontend IC supporting ISO/IEC 14443 A/B, FeliCa, and ISO/IEC 15693, with SPI/I2C/UART host interfaces in an HVQFN-32 package.

Key Specifications

Type NFC Frontend IC (Contactless Reader)
Supported Protocols ISO 14443 A/B, FeliCa, ISO 15693
Operating Frequency 13.56 MHz
Data Rate Up to 848 kbps
Host Interface SPI, I2C, UART
Supply Voltage 2.5 V to 5.5 V
Antenna Driver Output Up to 80 mA
Package HVQFN-32 (5 x 5 mm)
Operating Temperature -25°C to 85°C

Features

  • Multi-protocol NFC/RFID reader support
  • Integrated antenna driver with up to 80 mA output
  • Three host interfaces: SPI, I2C, UART
  • Low power card detection mode
  • Integrated 512-byte FIFO buffer
  • Supports MIFARE and NTAG authentication

Applications

  • Access control and smart card readers
  • Public transport ticketing systems
  • Payment terminals and POS readers
  • Smart poster and NFC tag readers
  • Industrial identification and tracking
Product Introduction: CLRC66303HNE Product Introduction

The CLRC66303HNE from NXP Semiconductors is a high-performance multi-protocol NFC frontend IC designed for contactless communication at 13.56 MHz. It supports ISO/IEC 14443 A/B (including MIFARE and NTAG), FeliCa, and ISO/IEC 15693 protocols. The device integrates a complete NFC transceiver with antenna driver, receiver, and demodulator, requiring only an external antenna and matching circuit. Three host interface options (SPI, I2C, UART) provide flexibility for different MCU platforms. The 512-byte FIFO buffer enables efficient data transfer between the host and the NFC frontend. Low power card detection mode minimizes standby power consumption in battery-operated devices.

Working Principle: CLRC66303HNE Working Principle

The CLRC66303HNE operates as a 13.56 MHz RFID/NFC reader frontend. The transmitter generates an RF carrier at 13.56 MHz that is amplified by the integrated antenna driver and radiated through the external antenna. When a passive tag enters the electromagnetic field, the tag modulates the carrier using load modulation. The CLRC66303HNE receiver detects this modulation through the same antenna and demodulates the signal. The integrated correlator and framing logic handle protocol-specific signal processing including anti-collision, CRC generation/verification, and data framing for ISO 14443 A/B, FeliCa, and ISO 15693. For MIFARE authentication, a dedicated crypto engine handles the mutual authentication handshake. The host MCU communicates with the CLRC663 via SPI, I2C, or UART, sending commands and reading status and data through the 512-byte FIFO.

Pin Description: CLRC66303HNE Pin Definition and Functions
Pin Group Name Type Function
Multiple TXM1/TXM2 Output Transmitter antenna driver outputs
Multiple RX Input Receiver inputs
Multiple SDA/SCL/SCK/MOSI/MISO/TX/RX I/O Host interface pins (SPI/I2C/UART)
Multiple VDD/VSS Power Supply and ground
1 pin RSTPD Input Reset/power-down (active low)
1 pin IRQ Output Interrupt request to host
1 pin TVDD/TVSS Power Transmitter supply
1 pin AVDD/AVSS Power Analog supply
Application Scenarios: In which products and applications is CLRC66303HNE used
  • Access control door reader with MIFARE card authentication
  • Public transport automatic fare collection terminals
  • POS payment terminal NFC reader for contactless cards
  • Smart poster and NFC tag reading in consumer devices
  • Industrial asset tracking with ISO 15693 tag scanning
Alternative Models: What chips are recommended as replacements for CLRC66303HNE
Manufacturer Part Number Package Notes
NXP CLRC66301HNE HVQFN-32 Single-protocol variant
NXP PN5180A0XXC/C1 HVQFN-40 High-power NFC frontend
STMicroelectronics ST25R3916BQTR QFN-32 NFC reader, 1.4W output
Infineon NAC1080 VQFN-32 NFC with integrated ARM Cortex-M0
TI TRF7970ARHBR QFN-32 Multi-protocol 13.56MHz reader

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1