Opens in a new tab

AP62301WU-7

3A Sync Buck DC-DC, 4.5-40V, 500kHz, Int MOSFETs, TSOT26

6789

Effective Inventory

Image for reference only

Manufacturer Part:

AP62301WU-7

Package:

TSOT26 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP62301WU-7 from Diodes Incorporated is a 3 A, 40 V synchronous buck DC-DC converter with 65 mOhm high-side and 40 mOhm low-side integrated MOSFETs, operating at 500 kHz in a TSOT26 package.

Key Specifications

Type Synchronous Buck DC-DC Converter
Input Voltage 4.5 V to 40 V
Output Voltage 0.8 V to 30 V (Adjustable)
Output Current 3 A
Switching Frequency 500 kHz
High-Side RDS(on) 65 mOhm
Low-Side RDS(on) 40 mOhm
Reference Voltage 0.8 V (1.5%)
Package TSOT26 (2.9 x 1.6 mm)
Operating Temperature -40C to 125C

Features

  • 4.5 V to 40 V wide input voltage range
  • 3 A output current with integrated MOSFETs
  • Fixed 500 kHz switching frequency
  • Internal soft start and compensation
  • EN pin for shutdown control
  • PWM/PFM mode for high light-load efficiency

Applications

  • Industrial and telecom power supplies
  • Set-top box and TV point-of-load converters
  • Battery-powered equipment regulation
  • Networking and server power rails
Product Introduction: AP62301WU-7 Product Introduction

The AP62301WU-7 from Diodes Incorporated is a 3 A synchronous step-down DC-DC converter with integrated 65 mOhm high-side and 40 mOhm low-side MOSFETs. The wide 4.5 V to 40 V input range supports a variety of power source configurations including 12 V, 24 V, and battery supplies. The device operates at a fixed 500 kHz switching frequency with internal loop compensation, requiring only external input/output capacitors, an inductor, and feedback resistors. The EN pin provides enable/disable control with a precision threshold. PWM/PFM mode switching maintains high efficiency across the load range. The compact TSOT26 package minimizes board area for space-constrained designs.

Working Principle: AP62301WU-7 Working Principle

The AP62301WU-7 uses a constant-frequency current-mode control architecture with integrated power MOSFETs. The internal oscillator generates a 500 kHz clock. During each switching cycle, the high-side MOSFET turns on, connecting the input voltage to the inductor through the SW node. The inductor current ramps up linearly. When the peak inductor current reaches the level set by the error amplifier, the high-side MOSFET turns off and the low-side MOSFET turns on, allowing the inductor current to freewheel through the low-side switch. The error amplifier compares the feedback voltage (from the external resistor divider) with the 0.8 V internal reference and adjusts the peak current threshold to regulate the output. At light loads, the device enters PFM mode where switching cycles are skipped to reduce switching losses. The internal soft start gradually increases the current limit during startup to prevent inrush current overshoot.

Pin Description: AP62301WU-7 Pin Definition and Functions
Pin Name Type Function
1 BST Power Bootstrap capacitor for high-side gate
2 VIN Power Input supply (4.5-40V)
3 EN Input Enable (high=on, low=off)
4 GND Ground Ground
5 FB Input Feedback voltage (0.8V reference)
6 SW Output Switch node (inductor connection)
Application Scenarios: In which products and applications is AP62301WU-7 used
  • 12V/24V industrial bus to 5V/3.3V point-of-load conversion
  • Set-top box and smart TV secondary power rails
  • Battery-powered equipment step-down regulation
  • Networking equipment POL from 12V intermediate bus
  • General-purpose 3A buck converter with minimal external components
Alternative Models: What chips are recommended as replacements for AP62301WU-7
Manufacturer Part Number Package Notes
Diodes Inc AP62302WU-7 TSOT26 2A, same family, lower current
Texas Instruments TPS54335ADDAR HSOIC-8 3A, 28V, 50kHz-1.5MHz
Monolithic Power MP8759GD-Z TSOT23-6 3A, 24V, 500kHz
Richtek RT6201GQW WQFN-10 3A, 36V, 500kHz
onsemi NCP3231MNTXG DFN-10 3A, 28V, 500kHz

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1