Opens in a new tab

ATSAMD21E17A-MU

Cortex-M0+ 48MHz MCU, 128KB Flash, USB FS, 4 SERCOM, QFN-32

12345

Effective Inventory

Image for reference only

Manufacturer Part:

ATSAMD21E17A-MU

Package:

QFN-32 (5 x 5 x 0.9 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ATSAMD21E17A-MU from Microchip Technology is an ARM Cortex-M0+ microcontroller running at 48 MHz with 128 KB Flash, 16 KB SRAM, USB 2.0, and SERCOM peripherals in a QFN-32 package.

Key Specifications

Type ARM Cortex-M0+ Microcontroller
CPU Cortex-M0+, 48 MHz
Flash 128 KB
SRAM 16 KB
USB 2.0 Full Speed Device
SERCOM 4 (configurable as UART/SPI/I2C)
ADC 10-bit, 350 ksps, 20 channels
DAC 10-bit, 1 channel
TC/TCC 3x TC + 3x TCC
Supply Voltage 1.62 V to 3.63 V
Package QFN-32 (5 x 5 mm)
Operating Temperature -40C to +85C

Features

  • 48 MHz Cortex-M0+ with single-cycle hardware multiplier
  • 128 KB Flash with 16 KB SRAM
  • USB 2.0 full-speed device with embedded PHY
  • 4 SERCOM modules (UART/SPI/I2C configurable)
  • Event system for peripheral interconnection
  • DMA controller for autonomous data transfer
  • Internal RC oscillators (32kHz and 48MHz)

Applications

  • USB HID and CDC devices
  • IoT sensor nodes with wireless module interface
  • Portable consumer electronics
  • Arduino-compatible embedded platforms
Product Introduction: ATSAMD21E17A-MU Product Introduction

The ATSAMD21E17A-MU from Microchip Technology is a low-power ARM Cortex-M0+ microcontroller operating at up to 48 MHz with 128 KB Flash and 16 KB SRAM. The device features a USB 2.0 full-speed device interface with embedded PHY, four configurable SERCOM modules that can each operate as UART, SPI, or I2C, a 10-bit ADC with up to 350 ksps, and a 10-bit DAC. The event system enables direct peripheral-to-peripheral communication without CPU intervention, and the DMA controller supports autonomous data transfers. Internal RC oscillators (32 kHz and 48 MHz) eliminate the need for external crystals in many applications. The ATSAMD21 is the chip used in Arduino Zero and many Adafruit Feather boards.

Working Principle: ATSAMD21E17A-MU Working Principle

The ATSAMD21E17A-MU uses the ARM Cortex-M0+ core, a 2-stage pipeline processor optimized for low power and deterministic interrupt handling. The Nested Vectored Interrupt Controller (NVIC) supports up to 32 interrupt channels with 4 priority levels. The SERCOM (Serial Communication Interface) modules are flexible peripherals that can each be independently configured as USART, SPI (master/slave), or I2C (master/slave), allowing the four modules to provide any combination of serial interfaces. The event system is a 12-channel routing network that allows peripherals to trigger actions in other peripherals (e.g., ADC conversion triggered by TC overflow) without CPU involvement. The DMA controller provides 12 channels for memory-to-peripheral and peripheral-to-memory transfers, reducing CPU overhead for data-intensive operations. The USB controller handles the full USB 2.0 FS protocol in hardware, including CRC generation, NRZI encoding, and endpoint management, requiring only minimal CPU intervention for setup and data transfer.

Pin Description: ATSAMD21E17A-MU Pin Definition and Functions
Pin Group Name Type Function
Multiple PA00-PA31 I/O GPIO with SERCOM/ADC/TC alternate
Dedicated VDDANA Power Analog supply (1.62-3.63V)
Dedicated VDDIN Power Digital supply input
Dedicated USB_DM/DP I/O USB data lines
Dedicated RESET Input System reset (active LOW)
Dedicated XIN/XOUT I/O External crystal
Application Scenarios: In which products and applications is ATSAMD21E17A-MU used
  • USB CDC virtual COM port device for firmware update and debug
  • IoT sensor node with I2C sensors and SPI wireless module
  • Portable BLE peripheral with UART interface to BLE module
  • Custom Arduino-compatible board with native USB
Alternative Models: What chips are recommended as replacements for ATSAMD21E17A-MU
Manufacturer Part Number Package Notes
Microchip ATSAMD21G18A-MU QFN-48 256KB Flash, more pins
Microchip ATSAMD21E18A-MU QFN-32 256KB Flash, same package
NXP LPC11U35FHI33/501 QFN-32 Cortex-M0, USB, similar class
ST STM32F042K6U6 QFN-32 Cortex-M0, USB FS, 32KB
Silicon Labs EFM32HG322F64G QFN-32 Cortex-M0+, 64KB, low power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1