Opens in a new tab

BAS416

Low-Leakage Switching Diode, 75V, 3pA IR, 0.8us trr, SOD-323

45678

Effective Inventory

Image for reference only

Manufacturer Part:

BAS416

Package:

SOD-323 (1.7 x 1.25 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BAS416 from Nexperia is a low-leakage switching diode with 3 pA typical reverse current, 75 V reverse voltage, and 0.8 us typical reverse recovery time in an SOD-323 surface mount package.

Key Specifications

Type Low-Leakage Switching Diode
Reverse Voltage (VR) 75 V (continuous)
Peak Reverse Voltage (VRRM) 85 V
Forward Current (IF) 200 mA (continuous)
Forward Voltage (VF) 1.0 V (max) @ IF=10mA
Reverse Current (IR) 3 pA (typ) @ VR=75V, 25C
Reverse Recovery Time (trr) 0.8 us (typical)
Junction Capacitance (Cd) 2 pF @ VR=0V, 1MHz
Package SOD-323 (1.7 x 1.25 x 0.95 mm)
Operating Temperature -65C to +150C (TJ)
Marking Code D4

Features

  • Ultra-low 3 pA typical leakage current
  • 75 V continuous reverse voltage rating
  • 0.8 us typical reverse recovery time
  • Low 2 pF junction capacitance
  • Compact SOD-323 package
  • Epitaxial planar construction

Applications

  • Low-leakage signal clamping
  • High-impedance input protection
  • Sensitive measurement circuit switching
  • Photodiode amplifier leakage prevention
Product Introduction: BAS416 Product Introduction

The BAS416 from Nexperia is an epitaxial low-leakage switching diode in a compact SOD-323 surface mount package. The device features an exceptionally low 3 pA typical reverse leakage current at 75 V, making it ideal for high-impedance and precision measurement applications where diode leakage would degrade accuracy. The 0.8 us typical reverse recovery time supports medium-speed switching applications. The 2 pF junction capacitance minimizes signal loading. The SOD-323 package provides a significantly smaller footprint than SOD-80/MiniMELF while maintaining reliable solder joints. The 75 V continuous reverse voltage rating covers most low-voltage signal applications.

Working Principle: BAS416 Working Principle

The BAS416 uses an epitaxial planar construction where the diode is formed on a high-resistivity epitaxial silicon layer grown on a low-resistivity substrate. The high-resistivity epitaxial layer and carefully controlled junction geometry produce the ultra-low 3 pA leakage current. In forward bias, the diode conducts with a forward voltage of approximately 0.7-1.0 V depending on current. In reverse bias below the breakdown voltage, only the extremely small saturation current (3 pA typical at 25C) flows, making the diode effectively an open circuit for high-impedance applications. During switching from forward to reverse bias, stored minority carriers must be swept out before the diode blocks, resulting in a brief reverse recovery period. The 0.8 us recovery time is typical for this construction, achieved through gold doping or similar lifetime-killing techniques that reduce carrier recombination time.

Pin Description: BAS416 Pin Definition and Functions
Pin Name Type Function
1 Cathode Terminal Cathode (indicated by marking band)
2 Anode Terminal Anode
Application Scenarios: In which products and applications is BAS416 used
  • Op amp input protection with sub-nA leakage budget
  • Photodiode amplifier clamp with minimal dark current contribution
  • Sensitive ADC input ESD clamp diode
  • Precision integrator reset switch with low leakage
Alternative Models: What chips are recommended as replacements for BAS416
Manufacturer Part Number Package Notes
Nexperia BAS45A,215 SOD-323 225V, similar low leakage
Nexperia BAS416,215 SOD-323 Same device, tape and reel
Vishay LL4148-GS08 MiniMELF 100V switching diode, higher leakage
onsemi MMSD4148T1G SOD-323 100V, general switching, higher IR
Nexperia BAS19,215 SOD-323 120V, low leakage alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1