Opens in a new tab

IPD60R385CP

600V CoolMOS N-CH MOSFET, 3.85Ohm, 3.3A, DPAK, Superjunction

12345

Effective Inventory

Image for reference only

Manufacturer Part:

IPD60R385CP

Package:

DPAK / TO-252-3 (6.5 x 5.5 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IPD60R385CP from Infineon Technologies is a 600V, 3.85 Ohm CoolMOS N-channel enhancement mode power MOSFET in a DPAK package for high-efficiency switching applications.

Key Specifications

Type 600V CoolMOS N-Channel Power MOSFET
VDS 600 V
RDS(on) (max) 3.85 Ohm @ VGS=10V
ID 3.3 A @ TC=25C
Gate Charge (Qg) 8.6 nC (typical)
Input Capacitance (Ciss) 310 pF (typical)
Switching Energy (Eoff) 30 uJ (typical)
VGS(th) 3.0 V (typical)
Package DPAK (TO-252)
Operating Temperature -55C to +150C (TJ)

Features

  • Superjunction CoolMOS technology for low RDS(on) x area
  • 3.85 Ohm RDS(on) at 600V rating
  • Low 8.6 nC gate charge for fast switching
  • Low switching energy (Eoff = 30 uJ)
  • 100% avalanche tested
  • DPAK surface mount package
  • RoHS compliant

Applications

  • Switch-mode power supply (SMPS) primary switch
  • PFC boost converter
  • LED lighting offline driver
  • Motor drive inverter
Product Introduction: IPD60R385CP Product Introduction

The IPD60R385CP from Infineon Technologies is a 600V N-channel CoolMOS superjunction power MOSFET with 3.85 Ohm on-resistance in a DPAK surface mount package. The superjunction technology uses alternating N and P columns in the drift region to achieve the low specific on-resistance (RDS(on) x Area) that is impossible with conventional planar MOSFET structures. The 8.6 nC gate charge and 30 uJ turn-off energy enable efficient high-frequency switching in offline power supplies. The device is 100% avalanche tested for ruggedness in unclamped inductive switching applications. The DPAK package provides good thermal performance with a junction-to-ambient thermal resistance of approximately 62 K/W on a standard PCB footprint.

Working Principle: IPD60R385CP Working Principle

The IPD60R385CP uses Infineon’s CoolMOS superjunction technology, which arranges alternating N-type and P-type columns in the drift region instead of the uniform N-type drift layer used in conventional MOSFETs. During the blocking state, the P-columns deplete the N-columns laterally, creating a high electric field that supports the 600V rating with a much thinner drift region than conventional designs. This thinner drift region has lower resistance, resulting in the 3.85 Ohm RDS(on) despite the 600V rating. During conduction, applying VGS > VGS(th) creates an inversion layer (channel) connecting the N+ source to the N-drift region, allowing current flow. The RDS(on) of 3.85 Ohm represents the sum of channel resistance, accumulation layer resistance, and drift region resistance. The low 8.6 nC gate charge is achieved through a fine-pitch cell structure that minimizes the gate-drain overlap capacitance (Miller capacitance), enabling fast switching and reducing switching losses. The body diode (parasitic P-N junction between P-body and N-drift) can conduct reverse current but has a relatively slow reverse recovery, making this device less suitable for hard-switched half-bridge applications.

Pin Description: IPD60R385CP Pin Definition and Functions
Pin Name Type Function
1 Gate Input MOSFET gate
2 Drain (tab) I/O MOSFET drain (connected to heat slug)
3 Source I/O MOSFET source
Application Scenarios: In which products and applications is IPD60R385CP used
  • 85-265VAC offline flyback converter primary switch at 65kHz
  • PFC boost converter switch in 200W adapter power supply
  • Isolated LED driver primary switch with low switching losses
  • Motor inverter leg with IGBT replacement for <5kHz switching
Alternative Models: What chips are recommended as replacements for IPD60R385CP
Manufacturer Part Number Package Notes
Infineon IPD60R280P6S DPAK 2.8 Ohm, 600V, lower RDS(on)
Infineon IPD60R600P7S DPAK 6 Ohm, 600V, higher RDS(on), lower cost
ST STF10NM60N DPAK 600V, 0.65 Ohm, higher current
onsemi FCD860N60Z DPAK 600V, 0.98 Ohm, similar class
Infineon IPA60R385CP TO-220 Same die, through-hole package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1