Opens in a new tab

LP2951CDMR2G

100mA LDO, 5V/Adj, 380mV Dropout, 75uA Iq, Error Flag, SOIC-8

5678

Effective Inventory

Image for reference only

Manufacturer Part:

LP2951CDMR2G

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LP2951CDMR2G from onsemi is a 100mA micropower LDO regulator with 380mV dropout, 75 uA Iq, programmable output, and error flag in an SOIC-8 package.

Key Specifications

Type 100mA Micropower Low-Dropout Regulator
Output Current 100 mA
Dropout Voltage 380 mV (typical) @ 100mA
Input Voltage 2.3 V to 30 V
Output Voltage 5.0V fixed or 1.24V to 29V adjustable
Quiescent Current 75 uA (typical)
Line Regulation 0.03%/V (typical)
Shutdown Current 3 uA (typical)
Error Flag Yes (open-collector, output undervoltage)
Package SOIC-8
Operating Temperature -40C to +125C

Features

  • Very low 75 uA quiescent current
  • 380 mV dropout at 100mA
  • 5.0V fixed or adjustable output
  • Error flag output (open-collector) for power-fail detection
  • Shutdown pin with 3 uA off-state current
  • 2.3V to 30V wide input range
  • Extremely tight line regulation (0.03%/V)

Applications

  • Battery-powered instrument regulation
  • Automotive power management
  • Industrial control power supply
  • Power-fail detection with error flag
Product Introduction: LP2951CDMR2G Product Introduction

The LP2951CDMR2G from onsemi is a 100mA micropower low-dropout voltage regulator available in 5.0V fixed or adjustable output versions. The 75 uA quiescent current and 3 uA shutdown current make it ideal for battery-powered applications where long battery life is critical. The error flag (open-collector) output provides a power-fail warning by pulling LOW when the output drops below approximately 4.7V (for the 5V version), enabling early warning before digital circuits malfunction. The 2.3V to 30V input range covers automotive 12V/24V systems with adequate margin. The 0.03%/V line regulation is among the best in this class. The device is a second-source equivalent of the TI LP2951 with identical functionality and pinout.

Working Principle: LP2951CDMR2G Working Principle

The LP2951CDMR2G uses a PNP pass transistor in a common-emitter (LDO) configuration where the emitter is connected to VIN and the collector provides the output. The error amplifier compares the feedback voltage (tapped from the output through an internal resistor divider for the 5V version, or external resistors for the adjustable version) with a 1.235V bandgap reference. The amplifier drives the PNP base to regulate the output. The 380 mV dropout at 100mA is the VCE(sat) of the PNP pass transistor plus the current-sense resistor voltage drop. The error flag comparator monitors the output voltage through a separate resistor divider and pulls the open-collector ERROR pin LOW when the output falls below approximately 95% of the nominal voltage. This provides an early warning of input voltage dropout or overload conditions. The shutdown pin controls a bias current source that disables the bandgap reference and error amplifier, reducing supply current to 3 uA.

Pin Description: LP2951CDMR2G Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Regulated output
2 SENSE Input Output sense (feedback)
3 SHUTDOWN Input Shutdown control (HIGH=off)
4 GND Ground Ground
5 ERROR Output Error flag (open-collector, LOW=fault)
6 TAP Output Internal resistor divider tap (for adj)
7 FB Input Feedback / bypass capacitor
8 VIN Input Unregulated input (2.3-30V)
Application Scenarios: In which products and applications is LP2951CDMR2G used
  • Battery-powered 5V instrument with power-fail warning via ERROR flag
  • Automotive 12V to 5V regulation with 30V overvoltage tolerance
  • Industrial PLC 24V to 5V local regulation with micropower standby
  • Portable data logger with 3uA shutdown current for battery conservation
Alternative Models: What chips are recommended as replacements for LP2951CDMR2G
Manufacturer Part Number Package Notes
TI LP2951ACMX/NOPB SOIC-8 Original TI version, A grade
Microchip TC1055-5.0VCT713 SOT-23-5 5.0V, 150mA, smaller, no error flag
onsemi NCP511SN50T1G SOT-23-5 5.0V, 80mA, smaller, no error flag
TI TPS70950DBVR SOT-23-5 5.0V, 150mA, ultra-low Iq, smaller
onsemi LP2950CDT-5.0RKG DPAK 100mA, 5V fixed, no adj/error, TO-252

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1