Opens in a new tab

74HC164D,653

8-bit Serial-In Parallel-Out Shift Register, 2-6V, 85MHz, SOIC-14

34567

Effective Inventory

Image for reference only

Manufacturer Part:

74HC164D,653

Package:

SOIC-14 / SO14 (8.65 x 3.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74HC164D,653 from Nexperia is an 8-bit serial-in, parallel-out shift register with gated data inputs and asynchronous master reset in an SOIC-14 package.

Key Specifications

Type 8-bit Serial-In / Parallel-Out Shift Register
Supply Voltage 2.0 V to 6.0 V
Propagation Delay 12 ns (typical @ 6V)
Max Clock Frequency 85 MHz (typical)
Output Drive +/-5.2 mA
Number of Bits 8
Data Inputs 2 (DSA, DSB, gated AND)
Reset Asynchronous master reset (MR, active LOW)
Package SOIC-14 (SO14, SOT108-1)
Operating Temperature -40C to +125C

Features

  • 8-bit serial-in / parallel-out shift register
  • Two gated serial data inputs (DSA and DSB)
  • Asynchronous master reset clears all outputs
  • 2.0V to 6.0V wide supply voltage range
  • 85 MHz maximum clock frequency
  • ESD protection: HBM >2000V, CDM >1000V
  • Input clamp diodes for overvoltage interfacing

Applications

  • LED display driving via serial data
  • I/O expansion for microcontrollers
  • Serial-to-parallel data conversion
  • Keypad scanning circuits
Product Introduction: 74HC164D,653 Product Introduction

The 74HC164D,653 from Nexperia is an 8-bit serial-in, parallel-out shift register in an SOIC-14 surface mount package. The device features two serial data inputs (DSA and DSB) that are ANDed together, allowing either input to serve as an active-HIGH enable for the other. Data is shifted into the register on the LOW-to-HIGH transition of the clock (CP). The asynchronous master reset (MR) input clears all eight outputs to LOW regardless of clock or data inputs. The 85 MHz maximum clock frequency supports high-speed serial data transfer. The 2.0V to 6.0V supply range covers 3.3V and 5V logic systems. The 74HC164 is widely used for I/O expansion, LED display driving, and serial-to-parallel data conversion in embedded systems. The ,653 suffix indicates tape and reel packaging with 2500 units per reel.

Working Principle: 74HC164D,653 Working Principle

The 74HC164D,653 consists of eight D-type flip-flops connected in series, with the output of each stage (Qn) connected to the D input of the next stage. Serial data enters through the AND gate formed by DSA and DSB: the AND output is high only when both DSA and DSB are high. This allows one input to gate the other for controlled data entry. On each LOW-to-HIGH clock transition, the AND gate output is captured into the first flip-flop (Q0), and all existing data shifts one position (Q0 to Q1, Q1 to Q2, etc.), with Q7 data lost. After eight clock cycles, a complete byte has been shifted in and all eight outputs are available in parallel. The asynchronous master reset (MR) forces all flip-flop outputs LOW immediately when asserted, regardless of clock or data states. The shift register has no output latch, so all outputs change as data shifts through, which must be considered in display applications where intermediate states may cause flicker.

Pin Description: 74HC164D,653 Pin Definition and Functions
Pin Name Type Function
1 DSA Input Serial data input A
2 DSB Input Serial data input B
3 Q0 Output Parallel output bit 0
4 Q1 Output Parallel output bit 1
5 Q2 Output Parallel output bit 2
6 Q3 Output Parallel output bit 3
7 GND Power Ground
8 Q4 Output Parallel output bit 4
9 Q5 Output Parallel output bit 5
10 Q6 Output Parallel output bit 6
11 Q7 Output Parallel output bit 7
12 CP Input Clock input (rising edge)
13 MR Input Master reset (active LOW)
14 VCC Power Supply (2-6V)
Application Scenarios: In which products and applications is 74HC164D,653 used
  • 3-digit 7-segment LED display driver using 3x 74HC164 daisy-chained from MCU SPI
  • 16-channel relay board I/O expansion with 2x 74HC164 in cascade
  • Keypad row scanner with serial shift and parallel column read
  • LED chaser/light sequencer with 8 outputs from single MCU pin
Alternative Models: What chips are recommended as replacements for 74HC164D,653
Manufacturer Part Number Package Notes
TI SN74HC164DR SOIC-14 Pin-compatible TI equivalent
onsemi MC74HC164DR2G SOIC-14 Pin-compatible equivalent
Nexperia 74HC164PW,118 TSSOP-14 Same function, smaller TSSOP package
TI SN74HC595DR SOIC-16 8-bit shift register with output latch, upgrade
Nexperia 74HC595D,118 SOIC-16 8-bit shift register with output latch, upgrade

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1