Opens in a new tab

BAV199-7-F

Low-Leakage Series Diode Pair, 70V, 3nA IR, SOT-23-3

12345

Effective Inventory

Image for reference only

Manufacturer Part:

BAV199-7-F

Package:

SOT-23-3 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BAV199-7-F from Diodes Incorporated is a 70V, 100mA low-leakage double switching diode (series pair) in a SOT-23-3 package, designed for ultra-low leakage applications.

Key Specifications

Type Low-Leakage Double Switching Diode (Series Pair)
Configuration 2 diodes in series
Peak Reverse Voltage 70 V
Average Rectified Current 100 mA
Forward Voltage 1.0 V (max) @ IF=10mA
Reverse Leakage 3 nA (max) @ VR=70V
Reverse Recovery Time 50 ns (typical)
Junction Capacitance 1.5 pF (typical)
Package SOT-23-3
Operating Temperature -65C to +150C

Features

  • Ultra-low 3 nA reverse leakage at 70V
  • 70V high reverse voltage rating
  • 1.5 pF low junction capacitance
  • Two diodes in series for high isolation
  • SOT-23-3 surface mount package

Applications

  • High-impedance circuit protection
  • Precision analog signal clamping
  • ESD protection for sensitive inputs
  • Sample-and-hold circuits
Product Introduction: BAV199-7-F Product Introduction

The BAV199-7-F from Diodes Incorporated is a low-leakage double switching diode array with two diodes connected in series, housed in a SOT-23-3 package. The device is specifically designed for applications requiring ultra-low reverse leakage current, with a maximum of only 3 nA at 70V. This makes it ideal for protecting high-impedance inputs in precision analog circuits such as op amp inputs, sample-and-hold circuits, and precision ADC front-ends. The 70V reverse voltage rating provides wide margin for most signal-level applications. The 1.5 pF junction capacitance minimizes loading on high-frequency signal paths. The series diode configuration doubles the effective reverse voltage rating and reduces leakage compared to a single diode.

Working Principle: BAV199-7-F Working Principle

The BAV199-7-F uses a silicon planar epitaxial process to achieve the ultra-low 3 nA reverse leakage. The diodes are constructed with carefully controlled doping profiles and passivation to minimize generation-recombination currents in the depletion region. In the series configuration, the two diodes share the reverse voltage, each blocking approximately half, which further reduces the per-diode leakage and increases the effective breakdown voltage. When forward biased, current flows through both diodes in series with a combined forward voltage of approximately 1.0V at 10mA. The 1.5 pF junction capacitance is achieved through a small junction area, which also contributes to the low leakage. The 50ns reverse recovery time is typical for a low-leakage silicon diode, slower than Schottky diodes but acceptable for most signal-level switching applications.

Pin Description: BAV199-7-F Pin Definition and Functions
Pin Name Type Function
1 Anode 1 Terminal Anode of diode 1
2 Common Terminal Cathode 1 / Anode 2 (series junction)
3 Cathode 2 Terminal Cathode of diode 2
Application Scenarios: In which products and applications is BAV199-7-F used
  • Precision op amp input ESD protection with 3nA leakage preserving nanoamp bias current
  • Sample-and-hold circuit diode clamping with low droop rate
  • High-impedance pH electrode input protection with minimal leakage
  • Analog switch off-state isolation boosting with series diode pair
Alternative Models: What chips are recommended as replacements for BAV199-7-F
Manufacturer Part Number Package Notes
Nexperia BAV199,215 SOT-23 Pin-compatible equivalent
onsemi BAV99LT1G SOT-23 Similar class, common cathode
Nexperia BAS416 SOD-323 Single low-leakage diode, 3pA
Diodes Inc BAV199DW-7-F SOT-363 Dual series pair, smaller package
Nexperia BAV199,235 SOT-23 Same, different packing

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1