Opens in a new tab

MP34DT06JTR

MEMS Microphone, 64dB SNR, PDM Output, 1.8V, 3.0×1.8mm

8901

Effective Inventory

Image for reference only

Manufacturer Part:

MP34DT06JTR

Package:

SMD (3.0 x 1.8 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MP34DT06JTR from STMicroelectronics is a MEMS audio microphone with 64dB SNR, 2.4MHz PDM output, and 2.65MHz acoustic overload point in a 3.0×1.8×0.9mm SMD package.

Key Specifications

Type MEMS Digital Audio Microphone (Bottom Port)
Sensitivity -26 dBFS
SNR 64 dB (A-weighted)
Frequency Response 20 Hz to 20 kHz
Acoustic Overload Point 2.65 kHz (130 dB SPL)
Output Format PDM (1-bit Pulse Density Modulation)
Clock Frequency 1.0 to 3.25 MHz
Current Consumption 550 uA (typical)
THD 1% @ 130 dB SPL
Supply Voltage 1.8V
Package SMD (3.0 x 1.8 x 0.9 mm)
Operating Temperature -40C to +85C

Features

  • 64dB A-weighted SNR for clear audio capture
  • PDM digital output eliminates analog noise susceptibility
  • 2.65kHz acoustic overload point (130 dB SPL)
  • Bottom-port for PCB-through-hole acoustic path
  • 1.8V low-voltage operation
  • Ultra-compact 3.0×1.8×0.9mm package

Applications

  • Smartphones and tablets
  • Wearable voice interfaces
  • Voice recognition and AI assistants
  • Audio recording and beamforming
Product Introduction: MP34DT06JTR Product Introduction

The MP34DT06JTR from STMicroelectronics is a digital MEMS microphone with a PDM (Pulse Density Modulation) output interface. The device integrates a MEMS sensing element and a preamplifier with a sigma-delta modulator on a single chip. The 64 dB A-weighted SNR provides high-quality audio capture suitable for voice recognition and recording applications. The 130 dB SPL acoustic overload point handles loud environments without clipping. The PDM digital output is immune to analog interference from nearby RF and digital circuits, making it ideal for smartphone and tablet designs. The bottom-port configuration allows the acoustic opening to be on the PCB side, enabling clean industrial design. The 1.8V supply voltage and 550 uA current consumption are compatible with always-on voice-detection systems. The compact 3.0 x 1.8 x 0.9 mm package minimizes board area.

Working Principle: MP34DT06JTR Working Principle

The MP34DT06JTR converts sound pressure to a digital PDM bitstream through three stages. First, the MEMS sensing element is a capacitive microphone consisting of a flexible diaphragm and a rigid backplate. Incoming sound pressure waves deflect the diaphragm, changing the capacitance between the diaphragm and backplate. Second, a charge amplifier converts this capacitance change to a voltage signal. Third, a sigma-delta modulator digitizes the analog voltage into a 1-bit PDM stream at the clock frequency (1.0-3.25 MHz). The PDM output is a high-frequency bitstream where the density of ‘1’ bits represents the instantaneous signal level. Decimation filtering in the host processor or codec converts the PDM stream to standard PCM audio (e.g., 48 kHz, 16-bit). The 64 dB SNR is determined by the MEMS transducer’s mechanical noise floor and the modulator’s quantization noise shaping. The 130 dB SPL acoustic overload corresponds to the point where THD reaches 1% as the diaphragm reaches maximum deflection.

Pin Description: MP34DT06JTR Pin Definition and Functions
Pin Name Type Function
1 VDD Power 1.8V supply
2 GND Power Ground
3 CLK Input PDM clock input (1.0-3.25 MHz)
4 DOUT Output PDM data output
5 L/R Input Left/Right channel select (stereo pairing)
– Acoustic Port Mechanical Bottom-side sound inlet
Application Scenarios: In which products and applications is MP34DT06JTR used
  • Smartphone dual-microphone beamforming with L/R stereo pairing via PDM
  • Smart speaker always-on voice detection at 550uA from 1.8V rail
  • Wearable voice assistant with 64dB SNR for wake-word recognition
  • Industrial audio monitoring with 130dB SPL headroom for machinery
Alternative Models: What chips are recommended as replacements for MP34DT06JTR
Manufacturer Part Number Package Notes
ST MP34DT05-A 3.5×2.65mm Similar, top-port version
TDK InvenSense ICS-43434 3.5×2.65mm I2S output, 65dB SNR
Knowles SPH0645LM4H 3.5×2.65mm I2S output, 65dB SNR
TDK InvenSense ICS-41350 3.5×2.65mm Ultra-low noise, 68dB SNR
ST MP23ABS1TR 3.0×1.8mm Analog output version

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1