Opens in a new tab

A1395SEHLT-T

Linear Hall Sensor, Programmable, Analog Out, SOT-23-5

3456

Effective Inventory

Image for reference only

Manufacturer Part:

A1395SEHLT-T

Package:

SOT-23-5 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The A1395SEHLT-T from Allegro MicroSystems is a programmable linear Hall-effect sensor with analog output, 5V supply, and SOT-23-5 package for position and current sensing.

Key Specifications

Type Programmable Linear Hall-Effect Sensor
Supply Voltage 3.0V to 5.5V
Output Type Analog (ratiometric to VCC)
Sensitivity Programmable (1 to 18 mV/G)
Quiescent Output Programmable (0.5V to 4.5V)
Bandwidth 30 kHz (typical)
Output Noise 1.5 mV RMS (typical)
Temperature Coefficient Programmable (compensates magnet drift)
Current Consumption 4 mA (typical)
Package SOT-23-5 (LH suffix)
Operating Temperature -40C to +125C (E grade)

Features

  • Programmable sensitivity and quiescent output voltage
  • Programmable temperature coefficient for magnet compensation
  • Analog ratiometric output
  • 30 kHz bandwidth
  • Precision EEPROM for post-assembly calibration
  • Lock feature to prevent accidental reprogramming

Applications

  • Motor position sensing
  • Current sensing via magnetic field
  • Valve position detection
  • Pedal position sensing
Product Introduction: A1395SEHLT-T Product Introduction

The A1395SEHLT-T from Allegro MicroSystems is a programmable linear Hall-effect sensor with an analog output in a compact SOT-23-5 package. The device allows post-assembly programming of sensitivity (1 to 18 mV/G), quiescent output voltage (0.5V to 4.5V), and temperature coefficient, enabling precise calibration after the sensor is mounted in its final position. The programmable temperature coefficient compensates for the temperature drift of permanent magnets used in position sensing, maintaining system accuracy over the full -40C to +125C range. The ratiometric output tracks the supply voltage, simplifying ADC conversion in microcontroller-based systems. The 30 kHz bandwidth supports dynamic position sensing in motor control applications. The SOT-23-5 package is ideal for space-constrained automotive and industrial designs.

Working Principle: A1395SEHLT-T Working Principle

The A1395SEHLT-T uses a Hall-effect sensing element and a programmable signal conditioning chain. The Hall element is a thin semiconductor plate through which current flows. When a magnetic field perpendicular to the plate is applied, the Lorentz force deflects charge carriers, creating a Hall voltage proportional to the magnetic field strength. This small Hall voltage (typically microvolts) is amplified by a programmable gain amplifier, whose gain sets the sensitivity (1-18 mV/G). A DAC adds the programmable quiescent offset voltage. The output driver provides a low-impedance analog voltage ratiometric to VCC. The temperature coefficient is implemented by a digital temperature compensation engine that reads an internal temperature sensor and adjusts the output based on a programmable coefficient stored in EEPROM. Programming is done through the output pin using a serial protocol, with a lock bit to prevent accidental reprogramming after calibration. The EEPROM retains the calibration values for the device lifetime.

Pin Description: A1395SEHLT-T Pin Definition and Functions
Pin Name Type Function
1 VCC Power Supply voltage (3.0-5.5V)
2 GND Power Ground
3 OUT Output Analog output / Programming interface
4 NC – No connect
5 NC – No connect
Application Scenarios: In which products and applications is A1395SEHLT-T used
  • Automotive throttle pedal position with programmable sensitivity and offset
  • Motor commutation position sensor with 30kHz bandwidth for BLDC control
  • Current sensing via magnetic field from PCB trace with programmable gain
  • Hydraulic valve position detection with temperature-compensated magnet drift
Alternative Models: What chips are recommended as replacements for A1395SEHLT-T
Manufacturer Part Number Package Notes
Allegro A1391SEHLT-T SOT-23-5 Lower sensitivity range version
Allegro A1302EUA-T SIP-3 Non-programmable, 1.3 mV/G
Melexis MLX90215LUA-AAA SOT-23 Programmable linear Hall, alternative
Infineon TLE4997S8160409 SOT-23-5 Programmable linear Hall
TDK-Micronas HAC4900BC-AAA SOT-23-5 Programmable linear Hall

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1