Opens in a new tab

MOC3021S-TA1

Zero-Crossing Triac Driver Opto, 400V, 15mA IFT, DIP-6

7890

Effective Inventory

Image for reference only

Manufacturer Part:

MOC3021S-TA1

Package:

DIP-6 (9.9 x 6.5 x 3.7 mm, 300 mil width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MOC3021S-TA1 from onsemi is a zero-crossing triac driver optocoupler with 400V blocking voltage, 60mA LED trigger current, and DIP-6 package for AC power control.

Key Specifications

Type Zero-Crossing Triac Driver Optocoupler
Output Device Photo-triac (zero-crossing detector)
Blocking Voltage 400 V (non-repetitive peak off-state)
LED Trigger Current (IFT) 15 mA (maximum)
LED Forward Voltage 1.25 V (typical) @ IF=10mA
On-State Current 100 mA (RMS)
Isolation Voltage 5300 Vrms (1 minute)
Zero-Crossing Voltage 10 V (inhibit voltage)
Zero-Crossing Hysteresis 5 V
dV/dt 10 V/us (critical rate of rise)
Package DIP-6 (300 mil)
Operating Temperature -40C to +85C
Safety Approvals UL1577, VDE, CSA

Features

  • Zero-crossing detection built-in
  • 400V blocking voltage
  • 5300Vrms isolation voltage
  • Low 15mA trigger current
  • Zero-crossing reduces EMI in AC switching
  • DIP-6 through-hole package

Applications

  • Solid-state relay driver
  • AC motor speed control
  • Light dimmer circuits
  • Heater control
Product Introduction: MOC3021S-TA1 Product Introduction

The MOC3021S-TA1 from onsemi is a zero-crossing triac driver optocoupler designed for controlling AC power loads through an external power triac. The integrated zero-crossing detector ensures the external triac is triggered only when the AC line voltage crosses zero, dramatically reducing the inrush current and electromagnetic interference (EMI) compared to random-phase triggering. The 400V blocking voltage supports 240VAC line operation with margin. The 15mA maximum LED trigger current is easily driven from a microcontroller GPIO through a current-limiting resistor. The 5300Vrms isolation voltage provides safe separation between the low-voltage control circuit and the high-voltage AC line. The DIP-6 package is easy to handle and provides adequate creepage for 240VAC applications. The -TA1 suffix indicates onsemi’s specific ordering code.

Working Principle: MOC3021S-TA1 Working Principle

The MOC3021S-TA1 contains an infrared LED optically coupled to a zero-crossing photo-triac detector. When LED current flows (IF > IFT = 15 mA), the LED emits infrared photons that illuminate the photo-triac die. The photo-triac has two anti-parallel thyristor structures that can conduct AC current. The zero-crossing detector circuit inhibits the photo-triac from turning on when the AC line voltage is above the inhibit threshold (10V). The triac can only be triggered when the line voltage is within +/-10V of zero, which occurs twice per AC cycle (100 or 120 times per second for 50/60 Hz). This zero-crossing triggering ensures the external power triac turns on at the voltage zero-crossing, producing a gradual current ramp-up rather than a sudden step, which reduces EMI and thermal stress on the load. The external power triac is driven by the photo-triac output current (up to 100mA RMS), which is sufficient to trigger most medium-current power triacs.

Pin Description: MOC3021S-TA1 Pin Definition and Functions
Pin Name Type Function
1 Anode Input LED anode
2 Cathode Input LED cathode
3 NC – No connect
4 Main Terminal 1 Output Photo-triac main terminal 1
5 NC – No connect
6 Main Terminal 2 Output Photo-triac main terminal 2
Application Scenarios: In which products and applications is MOC3021S-TA1 used
  • 240VAC heater zero-crossing SSR with MOC3021S driving BTA16 power triac
  • AC fan speed control with zero-crossing triggering for reduced EMI
  • Incandescent lamp on/off control with 5300Vrms isolation from MCU
  • Industrial solenoid valve AC driver with zero-crossing for contact life extension
Alternative Models: What chips are recommended as replacements for MOC3021S-TA1
Manufacturer Part Number Package Notes
onsemi MOC3041M DIP-6 Non-zero-crossing version, 800V
Vishay MOC3021-TA1 DIP-6 Direct equivalent
onsemi MOC3023M DIP-6 5mA trigger current version
Sharp S11MD5V DIP-6 Zero-crossing, 600V, alternative
onsemi MOC3063S-TA1 DIP-6 Zero-crossing, 600V blocking

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1