Opens in a new tab

PS2501AL-1-F3-A

Optocoupler, 5kVrms, CTR 50-400%, 80V VCEO, SMD-4

7900

Effective Inventory

Image for reference only

Manufacturer Part:

PS2501AL-1-F3-A

Package:

4-SMD Gull Wing (5.1 x 4.3 x 4.0 mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PS2501AL-1-F3-A from Renesas Electronics (formerly NEC/CEL) is a 5kVrms optocoupler with phototransistor output, 50-400% CTR, and surface-mount gull-wing 4-pin package.

Key Specifications

Type Phototransistor Output Optocoupler
CTR (Current Transfer Ratio) 50% to 400% @ IF=5mA, VCE=5V
Isolation Voltage 5000 Vrms (1 minute)
VCEO (Collector-Emitter) 80 V
IC (Collector Current) 50 mA (max)
IF (Forward Current) 30 mA (max continuous)
VF (Forward Voltage) 1.17V (typical), 1.4V (max) @ IF=10mA
VCE(sat) 0.3V (max) @ IF=10mA, IC=2mA
Rise Time 3 us (typical)
Fall Time 5 us (typical)
Isolation Resistance 10^12 Ohm (min) @ VIO=1kVDC
Isolation Capacitance 0.5 pF (typical)
Package 4-SMD Gull Wing (surface mount)
Operating Temperature -55C to +100C
Safety Approval UL Recognized (No. E72422)

Features

  • 5000Vrms high isolation voltage
  • 80V VCEO for higher voltage applications
  • 50-400% CTR range
  • High-speed switching: 3us rise, 5us fall
  • Surface-mount gull-wing package
  • UL recognized safety approval

Applications

  • Power supply feedback isolation
  • Telephone/FAX interfaces
  • FA/OA equipment signal isolation
  • Programmable logic controller I/O
Product Introduction: PS2501AL-1-F3-A Product Introduction

The PS2501AL-1-F3-A from Renesas Electronics (originally NEC, later CEL) is a single-channel phototransistor optocoupler in a 4-pin surface-mount gull-wing package. The L suffix indicates the gull-wing (lead-bending) surface-mount variant of the PS2501A-1 through-hole DIP version. The F3-A suffix indicates tape and reel packaging. The device provides 5000Vrms isolation voltage between input and output, making it suitable for reinforced isolation in power supply feedback and industrial control applications. The 80V VCEO rating is higher than many competing optocouplers, allowing direct connection to 24V industrial logic. The CTR ranges from 50% to 400% at IF=5mA, covering a wide range of drive conditions. The 3us rise time and 5us fall time are suitable for moderate-speed digital signal isolation. The UL recognized safety approval (No. E72422) facilitates compliance with end-equipment safety standards.

Working Principle: PS2501AL-1-F3-A Working Principle

The PS2501AL-1-F3-A consists of a gallium arsenide (GaAs) infrared LED optically coupled to an NPN silicon phototransistor in a single 4-pin package. When forward current flows through the LED (IF), it emits infrared photons at approximately 940nm. These photons pass through the transparent dielectric isolation layer and strike the base region of the phototransistor, generating electron-hole pairs through photoelectric absorption. The photogenerated carriers create a base current that is amplified by the phototransistor’s current gain (hFE), producing a collector current IC = IF x CTR. The CTR of 50-400% means that for every 1mA of LED current, the phototransistor can sink 0.5 to 4mA of collector current. The wide CTR range reflects the natural variation in both LED coupling efficiency and phototransistor hFE across production lots. The 5000Vrms isolation is achieved through the physical separation between the LED and phototransistor chips and the dielectric properties of the transfer mold compound. The isolation resistance of 10^12 Ohm and capacitance of 0.5pF ensure minimal leakage and coupling between input and output circuits. The 80V VCEO is determined by the collector-base breakdown voltage of the phototransistor, allowing operation with higher supply voltages than typical 30V optocouplers.

Pin Description: PS2501AL-1-F3-A Pin Definition and Functions
Pin Name Type Function
1 Anode Input LED anode
2 Cathode Input LED cathode
3 Emitter Output Phototransistor emitter
4 Collector Output Phototransistor collector
Application Scenarios: In which products and applications is PS2501AL-1-F3-A used
  • Switching power supply optocoupler feedback with 5kVrms reinforced isolation and 50-400% CTR for TL431 error amplifier interface
  • Industrial PLC digital input isolation with 80V VCEO for 24V logic and UL recognized safety approval
  • FA/OA equipment signal isolation with 3us/5us switching speed for 100kbps digital communication
Alternative Models: What chips are recommended as replacements for PS2501AL-1-F3-A
Manufacturer Part Number Package Notes
Renesas PS2501AL-1-F3 SMD-4 Same device, different tape suffix
Renesas PS2501-1 DIP-4 Through-hole version
Sharp PC357N2J000F SOP-4 CTR 100-300%, similar function
Vishay SFH6156-3T SOP-4 CTR 100-200%, compatible
Everlight EL817C DIP-4 Popular equivalent, DIP package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1