Opens in a new tab

HIP4082IBZ

Full Bridge FET Driver, 80V, 1.25A, Dead Time, SOIC-16

4092

Effective Inventory

Image for reference only

Manufacturer Part:

HIP4082IBZ

Package:

SOIC-16 Narrow (9.9 x 3.9 x 1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HIP4082IBZ from Renesas Electronics (formerly Intersil) is an 80V full-bridge N-channel MOSFET driver with 1.25A peak output, programmable dead time, and SOIC-16 package.

Key Specifications

Type 80V Full-Bridge N-Channel MOSFET Driver
Configuration Full Bridge (4 N-Channel MOSFETs)
Peak Output Current (Source) 1.4 A
Peak Output Current (Sink) 1.3 A
Bootstrap Supply Max 95 VDC
Supply Voltage 8.5V to 15V
Rise/Fall Time 9 ns / 9 ns (typical, 1000pF load)
Programmable Dead Time 0.1 us to 4.5 us
Input Delay 40 ns (typical)
Output Delay 25 ns (typical)
Input Logic Threshold VIL = 1V; VIH = 2.5V (compatible with 5-15V logic)
Disable Pin (DIS) Active-low (refreshes bootstrap when pulled low)
Shoot-Through Protection Yes (internal logic prevents overlapping outputs)
Under-Voltage Protection Yes (VDD UVLO)
Package SOIC-16 (narrow, IB suffix)
Operating Temperature -55C to +125C (I grade)

Features

  • Independently drives 4 N-Channel MOSFETs in full-bridge or half-bridge
  • Bootstrap supply up to 95VDC
  • Programmable dead time: 0.1us to 4.5us
  • DIS pin disables all outputs and refreshes bootstrap capacitors
  • Shoot-through protection prevents cross-conduction
  • Input logic compatible with 5V to 15V levels
  • Under-voltage lockout protection
  • No internal charge pump (bootstrap-based high-side drive)

Applications

  • DC motor control (H-bridge)
  • UPS systems
  • Full-bridge power supplies
  • Switching power amplifiers
  • Battery-powered vehicles
Product Introduction: HIP4082IBZ Product Introduction

The HIP4082IBZ from Renesas Electronics (formerly Intersil) is an 80V full-bridge N-channel MOSFET driver in an SOIC-16 surface-mount package. The device independently drives four N-channel MOSFETs in full-bridge (H-bridge) or dual half-bridge configurations. Unlike the higher-drive HIP4081, the HIP4082 has reduced output current (1.25A peak vs. 2.5A) which allows the smaller SOIC-16 package and makes it suitable for moderate-power applications with MOSFETs up to approximately 50A ID. The bootstrap-based high-side drive eliminates the need for a charge pump, simplifying the external circuit. Each high-side driver is powered by a bootstrap capacitor charged during the low-side on-time. The programmable dead time (0.1us to 4.5us) prevents shoot-through by ensuring both high-side and low-side MOSFETs in the same half-bridge are never on simultaneously. The DIS (disable) pin turns off all four outputs and actively refreshes the bootstrap capacitors by briefly turning on the low-side MOSFETs, ensuring the bootstrap capacitors are charged before the next PWM cycle. The shoot-through protection logic prevents invalid input combinations from causing cross-conduction. The input logic thresholds (VIL=1V, VIH=2.5V) are compatible with both 5V logic and higher-voltage control circuits.

Working Principle: HIP4082IBZ Working Principle

The HIP4082IBZ consists of four gate driver channels (two high-side, two low-side) with control logic for shoot-through protection and dead-time generation. The input pins (AL, AH, BL, BH) control the four MOSFET gate outputs (AHO, ALO, BHO, BLO). The control logic ensures that complementary outputs (AHO/ALO and BHO/BLO) are never simultaneously active, preventing shoot-through current. When an input transitions, the previously active output is turned off, and after the programmed dead time expires, the complementary output is turned on. The dead time is programmed by an external resistor connected between the HDEL/LDEL pins and VDD, setting the delay for high-side and low-side transitions respectively. The high-side drivers use bootstrap circuitry: when the low-side MOSFET is on, the SW node is near ground, and the bootstrap capacitor charges through the internal bootstrap diode from VDD. When the high-side MOSFET needs to turn on, the charge stored in the bootstrap capacitor provides the gate drive voltage above the SW node. The HIP4082 does not include an internal charge pump, so the bootstrap capacitors must be periodically refreshed by turning on the low-side MOSFETs. The DIS pin, when pulled low, disables all four outputs and activates a bootstrap refresh cycle by briefly turning on both low-side MOSFETs, charging the bootstrap capacitors to VDD minus the diode drop.

Pin Description: HIP4082IBZ Pin Definition and Functions
Pin Name Type Function
1 BHB I/O Bootstrap B (high-side B supply)
2 BHO Output Bridge B high-side gate drive
3 BHS I/O Bridge B high-side source (return)
4 BLO Output Bridge B low-side gate drive
5 BLS Power Bridge B low-side source (GND)
6 BL Input Bridge B low-side control input
7 BH Input Bridge B high-side control input
8 DIS Input Disable (active LOW, refreshes bootstrap)
9 LDEL Input Low-side dead time programming resistor
10 HDEL Input High-side dead time programming resistor
11 AH Input Bridge A high-side control input
12 AL Input Bridge A low-side control input
13 ALS Power Bridge A low-side source (GND)
14 ALO Output Bridge A low-side gate drive
15 AHS I/O Bridge A high-side source (return)
16 AHO Output Bridge A high-side gate drive
– AHB I/O Bootstrap A (pin not shown, internally connected)
Application Scenarios: In which products and applications is HIP4082IBZ used
  • 24V DC motor H-bridge drive with 4 N-channel MOSFETs, 0.5us dead time, and 80V bus capability for industrial robotics
  • 48V UPS full-bridge inverter with bootstrap high-side drive and DIS pin for bootstrap refresh during startup
  • Switching audio amplifier with 200kHz PWM, programmable dead time, and shoot-through protection for Class-D audio
Alternative Models: What chips are recommended as replacements for HIP4082IBZ
Manufacturer Part Number Package Notes
Renesas HIP4081AIBZ SOIC-20 Higher drive (2.5A), charge pump
Renesas HIP4080AIBZ SOIC-20 2.5A, with input PWM generator
TI DRV8305NPHPR HTSSOP-28 3-phase gate driver, more integrated
Infineon IRS2007S SOIC-8 Half-bridge, simpler function
onsemi NCP5183DR2G SOIC-8 Half-bridge driver, 600V bootstrap

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1