Opens in a new tab

TC33X-2-104E

100kOhm SMD Trimmer, 0.1W, Cermet, 3mm, Top Adj

12000

Effective Inventory

Image for reference only

Manufacturer Part:

TC33X-2-104E

Package:

SMD J-Lead (3.0 x 3.6 x 1.2 mm, 2.0mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TC33X-2-104E from Bourns is a 100kOhm 0.1W SMD cermet trimming potentiometer with top adjustment, 270-degree rotation, and 3mm open-frame package.

Key Specifications

Type SMD Cermet Trimming Potentiometer (Trimpot)
Resistance 100 kOhm (104 code)
Resistance Tolerance +/-25%
Power Rating 0.1W at 70C
Maximum Voltage 50V DC
Temperature Coefficient +/-250 ppm/C
Adjustment Type Top adjustment
Rotation 270 degrees (+/-20 degrees)
Rotation Stops Yes (-2 style with stops)
Resolution Essentially infinite
Contact Resistance Variation 5% max
Package SMD (J-lead, 3 x 3.6 x 1.2mm)
Operating Temperature -40C to +100C

Features

  • 3mm size meets EIA/EIAJ standard trimmer footprint
  • Cermet resistive element for stability
  • Rotational stop prevents over-travel (-2 style) Top adjustment for easy access
  • Recommended for reflow soldering
  • Compatible with pick-and-place and auto-adjustment

Applications

  • Voltage adjustment in power supplies
  • Feedback network trimming
  • Op-amp offset adjustment
  • Timing circuit calibration
Product Introduction: TC33X-2-104E Product Introduction

The TC33X-2-104E from Bourns is a 100kOhm surface-mount cermet trimming potentiometer (Trimpot) in the industry-standard 3mm TC33 open-frame package. The X suffix denotes the top-adjustment style with J-lead termination, -2 indicates the rotational stop version (prevents over-rotation beyond the resistive element), 104 is the resistance code (10 x 10^4 = 100kOhm), and E indicates tape and reel packaging (2500 units per 7-inch reel). The cermet (ceramic-metal) resistive element provides good stability over temperature (+/-250 ppm/C) and time, with a power rating of 0.1W at 70C. The -2 rotational stop is preferred in production environments because it prevents the wiper from being driven beyond the resistive track, which could damage the element or create an open circuit. The top-adjustment configuration allows access from the component side of the PCB, making it suitable for post-assembly calibration. The 3mm footprint is the EIA/EIAJ standard, enabling compatibility with automated pick-and-place equipment and the Bourns H-90 adjustment tool. The essentially infinite resolution of the cermet element allows fine voltage adjustments.

Working Principle: TC33X-2-104E Working Principle

The TC33X-2-104E is a three-terminal variable resistor using a cermet (ceramic-metal composite) resistive element deposited on a ceramic substrate. A wiper contact slides along the resistive track when the adjustment screw is rotated, changing the effective resistance between the wiper terminal and each end terminal. In voltage divider mode, the resistive element forms a divider from terminal 1 to terminal 3, with the wiper (terminal 2) tapping off a variable fraction of the applied voltage. The 270-degree mechanical rotation corresponds to the wiper traveling from one end of the resistive track to the other. The -2 rotational stop uses a mechanical clutch that prevents the wiper from being rotated beyond the end of the resistive element, unlike the -1 style which allows continuous rotation. The cermet element consists of metallic particles (typically ruthenium oxide) dispersed in a glass-ceramic matrix, providing a continuous resistive path with essentially infinite resolution (no discrete steps as in digital potentiometers). The +/-25% resistance tolerance reflects the inherent variation in cermet thick-film deposition, but the relative adjustment resolution is much finer.

Pin Description: TC33X-2-104E Pin Definition and Functions
Pin Name Type Function
1 CCW Terminal Counter-clockwise end of resistive element
2 Wiper Terminal Adjustable contact (output)
3 CW Terminal Clockwise end of resistive element
Application Scenarios: In which products and applications is TC33X-2-104E used
  • LM317 adjustable regulator feedback trimmer with 100kOhm range for fine output voltage calibration in bench power supply
  • Op-amp inverting gain trimming network where 100kOhm pot adjusts feedback ratio for precise calibration of measurement circuit
  • Oscillator frequency calibration with 100kOhm trimmer in RC timing network, rotational stop preventing mis-adjustment during production
Alternative Models: What chips are recommended as replacements for TC33X-2-104E
Manufacturer Part Number Package Notes
Bourns TC33X-2-103E SMD-3 10kOhm version
Bourns TC33X-1-104E SMD-3 Continuous rotation (no stop)
Vishay TC33X-2-104E SMD-3 Cross-reference equivalent
Murata PVG5A104C01R00 SMD-4 100kOhm, similar size
BI Technologies 3362P-1-104LF SMD-3 Open-frame, 100kOhm

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1