Opens in a new tab

STM32F401RBT6

84MHz Cortex-M4F MCU, 128KB Flash, 64KB RAM, USB OTG, 12-bit ADC, 5V-tolerant I/O in LQFP-64

6100

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F401RBT6

Package:

LQFP-64 (10.0 x 10.0 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F401RBT6 from STMicroelectronics is an ARM Cortex-M4 32-bit RISC microcontroller with FPU operating at up to 84MHz. It features 128KB Flash, 64KB SRAM, a 12-bit ADC, USB 2.0 FS OTG, and extensive communication interfaces in an LQFP-64 (10x10mm) package. The ART Accelerator enables 0-wait-state Flash execution at full speed.

Key Specifications

CPU Core ARM Cortex-M4F @ 84MHz
Flash Memory 128 KB
SRAM 64 KB
FPU Single-precision floating-point unit
ADC 1x 12-bit, 2.4Msps, 16 channels
Communication 3xI2C, 3xUSART, 3xSPI(2 w/I2S), SDIO
USB USB 2.0 Full-Speed OTG
Timers 6×16-bit + 2×32-bit + SysTick + 2xWDG
I/O Up to 50 (5V tolerant)
Supply Voltage 1.7V ~ 3.6V
Package LQFP-64 (10x10mm)
Operating Temperature -40°C ~ +85°C

Features

  • ART Accelerator for 0-wait-state Flash at 84MHz (105 DMIPS)
  • DSP instructions and single-precision FPU
  • 128µA/MHz run-mode current (peripherals off)
  • Multiple low-power modes: Stop (42µA), Standby (2.4µA)
  • USB 2.0 FS OTG with on-chip PHY
  • 16-stream DMA with FIFO and burst support
  • All I/O pins 5V tolerant
  • 96-bit unique device ID

Applications

  • Consumer electronics
  • Wearable devices
  • Smart sensors
  • Medical devices
  • Internet of Things (IoT) endpoints
Product Introduction: STM32F401RBT6 Product Introduction

The STM32F401RBT6 is a high-performance access-line microcontroller from the STM32F401 family. Based on the ARM Cortex-M4 core with FPU at 84MHz, it delivers 105 DMIPS performance with DSP instruction support. The ART Accelerator allows 0-wait-state execution from Flash, fully utilizing the CPU’s processing power. With 128KB Flash and 64KB SRAM, it provides ample memory for complex applications. The USB 2.0 FS OTG with on-chip PHY eliminates the need for an external USB transceiver, reducing BOM cost and board space.

Working Principle: STM32F401RBT6 Working Principle

The Cortex-M4F core executes Thumb-2 instructions with a 3-stage pipeline. The FPU accelerates floating-point calculations in a single cycle for most operations, critical for sensor fusion and signal processing. The ART Accelerator uses an instruction prefetch queue and branch cache to eliminate Flash wait states at 84MHz. The bus matrix connects the CPU to memories and peripherals through AHB and APB buses. The DMA controller offloads data transfers between peripherals and memory. Power management supports multiple low-power modes: Sleep, Stop (Flash in deep power-down: 10µA), and Standby (2.4µA) for battery-powered applications.

Pin Description: STM32F401RBT6 Pin Definition and Functions
Pin Group Count Functions
VDD/VSS 10 1.7-3.6V supply and ground (VDD, VDDA, VBAT)
PORTA-PORTE 50 5V-tolerant GPIO with alternate functions
BOOT0 1 Boot mode selection
NRST 1 Active-low reset input
OSC_IN/OSC_OUT 2 HSE oscillator (4-26MHz)
VBAT 1 Battery backup supply for RTC
Application Scenarios: In which products and applications is STM32F401RBT6 used
  • Wearable Fitness Tracker: FPU for sensor fusion (accel/gyro), 128µA/MHz for long battery life, USB for charging/data
  • USB Audio Device: I2S-capable SPI peripherals and USB FS support USB audio class with ART Accelerator ensuring real-time processing
  • Smart Home Sensor Node: 12-bit ADC reads analog sensors, USART/I2C connect digital sensors, USB enables firmware updates
  • Motor Control PMSM: Advanced timer with PWM generation, ADC with DMA for current sensing, FPU for field-oriented control math
Alternative Models: What chips are recommended as replacements for STM32F401RBT6
Model Manufacturer Key Difference
STM32F401RCT6 ST 256KB Flash, same package pin-compatible
STM32F401CCU6 ST 256KB Flash, UFQFPN-48 (7x7mm)
STM32F411RET6 ST 100MHz, 512KB Flash, pin-compatible
STM32G474RBT6 ST 170MHz, 128KB Flash, high-resolution timer
LPC4337JET100 NXP Dual-core M4/M0, 204MHz, LQFP-100

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1