Opens in a new tab

STM32F105VBT6

72MHz Cortex-M3 MCU with USB OTG, dual CAN 2.0B, 128KB Flash, 64KB SRAM in LQFP-100

9768

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F105VBT6

Package:

LQFP-100 (14.00 x 14.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F105VBT6 from STMicroelectronics is an ARM Cortex-M3 microcontroller running at 72MHz with 128KB Flash, 64KB SRAM, USB 2.0 full-speed OTG, and dual CAN 2.0B controllers in a 100-pin LQFP package. Part of the STM32 Connectivity line, it is designed for applications requiring USB and CAN interfaces.

Key Specifications

CPU Core ARM Cortex-M3, 72MHz
Flash Memory 128 KB
SRAM 64 KB
USB USB 2.0 Full-Speed OTG
CAN 2x CAN 2.0B
ADC 2 x 12-bit, 1Msps
Communication 5x USART, 3x SPI, 2x I2C
Supply Voltage 2.0V ~ 3.6V
Package LQFP-100 (14x14mm)
Operating Temperature -40°C ~ +85°C

Features

  • ARM Cortex-M3 core with hardware divide and single-cycle multiply
  • USB 2.0 full-speed OTG with integrated PHY
  • Dual CAN 2.0B controllers for automotive and industrial networking
  • 5 USARTs with SmartCard mode, IrDA, and LIN support
  • 2 x 12-bit ADC with up to 16 channels total
  • 7 timers including advanced-control and general-purpose types
  • Embedded CRC calculation unit

Applications

  • Industrial automation with CAN and USB connectivity
  • Medical diagnostic equipment
  • Building automation controllers
  • Automotive body electronics
  • USB-CAN protocol gateways
Product Introduction: STM32F105VBT6 Product Introduction

The STM32F105VBT6 is a member of the STMicroelectronics STM32 Connectivity line, featuring an ARM Cortex-M3 processor core running at 72MHz. This line is specifically designed for applications that require USB and CAN connectivity. The device integrates 128KB of Flash program memory and 64KB of SRAM. The USB 2.0 full-speed OTG interface includes an integrated PHY and supports host, device, and OTG modes. Two CAN 2.0B controllers provide connectivity for automotive and industrial networks. A comprehensive set of communication peripherals includes 5 USARTs, 3 SPI ports, and 2 I2C interfaces. The dual 12-bit ADC subsystem can sample at up to 1Msps.

Working Principle: STM32F105VBT6 Working Principle

The STM32F105VBT6 operates around the ARM Cortex-M3 core with its NVIC supporting up to 43 maskable interrupt channels. The multi-layer AHB bus matrix provides simultaneous access to Flash, SRAM, and peripherals from the core and DMA. The USB OTG controller integrates a full-speed PHY and supports SRP and HNP for OTG operation. The dual CAN controllers implement the CAN 2.0B protocol with hardware message filtering and transmit FIFOs. The ADC subsystem uses a 12-bit successive approximation architecture with configurable scan, continuous, and discontinuous modes. Power management includes multiple low-power modes (sleep, stop, standby) with wakeup sources from interrupts, CAN, USB, and external pins.

Pin Description: STM32F105VBT6 Pin Definition and Functions
Pin Name Function
1-8 PE0-PE7 GPIO/ADC/TIM
9 VDD 3.3V digital supply
10 VSS Ground
11-18 PA0-PA7 GPIO/USART/SPI/ADC/TIM
19-26 PB0-PB7 GPIO/I2C/CAN/TIM/ADC
27-34 PC0-PC7 GPIO/USART/SPI/ADC
35-42 PD0-PD7 GPIO/USART/CAN
43-50 PE8-PE15 GPIO/TIM
51-66 PA8-PA15, PB8-PB15 GPIO/USART/TIM/I2C/USB/CAN
67-82 PC8-PC15, PD8-PD15 GPIO/USART/TIM
83 VDDA Analog supply
84 VSSA Analog ground
85 VBAT Battery backup
86 NRST Reset
Application Scenarios: In which products and applications is STM32F105VBT6 used
  • USB-CAN Protocol Gateway: Dual CAN controllers and USB OTG enable protocol conversion between USB and CAN bus for automotive diagnostics
  • Industrial PLC Controller: 5 USARTs connect to multiple serial field devices; CAN provides deterministic bus communication
  • Medical Diagnostic Device: USB OTG supports both data download and peripheral control; dual ADC channels acquire sensor data
  • Building Automation Controller: 72MHz Cortex-M3 handles BACnet protocol; CAN connects to field bus; USB for configuration
Alternative Models: What chips are recommended as replacements for STM32F105VBT6
Model Manufacturer Key Difference
STM32F107VCT6 ST Same family with Ethernet MAC, 256KB Flash
STM32F105RCT6 ST Same, LQFP-64, fewer GPIO
LPC1759FBD80 NXP 120MHz Cortex-M3, USB, CAN, Ethernet
AT32F407VGT7 Artery 240MHz Cortex-M4, compatible, Ethernet
GD32F205VCT6 GigaDevice 120MHz Cortex-M3, USB OTG, CAN

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1