Opens in a new tab

TL431BQDBZ

Precision adjustable shunt regulator, 2.495V ref +/-0.5%, 1-100mA cathode current, 0.2Ohm dynamic impedance in SOT-23-3

8039

Effective Inventory

Image for reference only

Manufacturer Part:

TL431BQDBZ

Package:

SOT-23-3 (2.90 x 1.30 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TL431BQDBZ from Texas Instruments is a precision adjustable shunt regulator in a tiny SOT-23-3 package. It provides a reference voltage of 2.495V with plus or minus 0.5% accuracy (B grade), operates over a cathode current range of 1mA to 100mA, and supports cathode voltages from 2.495V to 36V. The Q suffix denotes extended automotive-qualified temperature range.

Key Specifications

Reference Voltage 2.495V (Typical) @ 25°C
Reference Accuracy +/-0.5% (B Grade)
Cathode Current Range 1mA ~ 100mA
Cathode Voltage Range (VKA) 2.495V ~ 36V
Dynamic Impedance 0.2Ohm (Typical)
Temperature Coefficient 6mV (Typical over C temp range)
Package SOT-23-3 (2.90 x 1.30mm)
Operating Temperature -40°C ~ +125°C (Q Grade)

Features

  • Industry-standard TL431 architecture with improved B-grade +/-0.5% accuracy
  • Wide operating cathode current range (1mA to 100mA)
  • Low dynamic output impedance of 0.2Ohm
  • Adjustable output voltage via external resistor divider
  • Extended temperature range to +125°C (Q suffix)
  • Compact SOT-23-3 surface-mount package

Applications

  • Switching power supply feedback regulation
  • Linear regulator reference voltage
  • Voltage monitoring and window comparators
  • Adjustable Zener diode replacement
  • OVP and OCP reference circuits
Product Introduction: TL431BQDBZ Product Introduction

The TL431BQDBZ from Texas Instruments is a three-terminal adjustable shunt regulator with improved thermal stability and +/-0.5% initial accuracy (B grade). The output voltage can be set to any value between 2.495V (VREF) and 36V using two external resistors. The device operates as a precision Zener diode with a sharp turn-on characteristic and low dynamic impedance of 0.2Ohm. The B grade provides +/-0.5% reference voltage accuracy over the industrial temperature range, making it suitable for precision power supply feedback loops. The Q suffix indicates qualification for extended temperature operation up to +125°C.

Working Principle: TL431BQDBZ Working Principle

The TL431BQDBZ operates as a precision shunt regulator using an internal bandgap reference and error amplifier. The REF pin is compared against an internal 2.495V bandgap reference. When the REF pin voltage exceeds VREF, the error amplifier drives the internal Darlington pass transistor harder, increasing cathode current and pulling VKA lower. Conversely, if REF falls below VREF, cathode current decreases. In a typical application, the output voltage is set by a resistor divider: VOUT = VREF x (1 + R1/R2). The low 0.2Ohm dynamic impedance ensures tight regulation under varying load conditions. The minimum cathode current of 1mA must be maintained for proper regulation.

Pin Description: TL431BQDBZ Pin Definition and Functions
Pin Name Function
1 REF Reference input – connect to output voltage divider
2 ANODE Anode – connect to ground
3 CATHODE Cathode – connect through resistor to supply
Application Scenarios: In which products and applications is TL431BQDBZ used
  • Offline Flyback SMPS Feedback: Optocoupler driver in primary-side feedback loop with +/-0.5% accuracy for tight regulation
  • Linear Regulator Reference: Provides precise 2.495V reference for discrete LDO designs
  • Battery Over-Voltage Protection: Window comparator using two TL431 devices detects over-charge and over-discharge
  • Adjustable Zener Replacement: Replaces fixed Zener diodes with adjustable, sharper breakdown and lower impedance
Alternative Models: What chips are recommended as replacements for TL431BQDBZ
Model Manufacturer Key Difference
TL431AIDBZ TI +/-1% accuracy (A grade)
TL432BIDBZR TI +/-0.5%, different pinout
KA431AZTA onsemi +/-1% accuracy, SOT-23
LM431ACM TI +/-1%, SOIC-8
TS431ILT ST 1.5% accuracy, low current

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1