Opens in a new tab

Home » Integrated Circuits ICs, Sensors » A3212ELHLT-T

A3212ELHLT-T

Ultra-sensitive unipolar Hall switch, 7G BOP, 15uA supply, chopper stabilized, open-drain output in SOT-23-3

10896

Effective Inventory

Image for reference only

Manufacturer Part:

A3212ELHLT-T

Package:

SOT-23-3 (2.90 x 1.30 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The A3212ELHLT-T from Allegro MicroSystems is an ultra-sensitive micropower unipolar Hall-effect switch in a SOT-23-3 package. It features a typical operate point of 7G, 15uA supply current, chopper stabilization for minimal switchpoint drift, and an open-drain output, making it ideal for battery-operated proximity sensing applications.

Key Specifications

Type Ultra-Sensitive Unipolar Hall-Effect Switch
Operate Point (BOP) 7G (Typical)
Release Point (BRP) 5G (Typical)
Hysteresis 2G (Typical)
Supply Voltage 2.4V ~ 5.5V
Supply Current 15uA (Typical)
Output Type Open-Drain
Chopper Stabilized Yes
Package SOT-23-3 (2.90 x 1.30mm)
Operating Temperature -40°C ~ +85°C (E Grade)

Features

  • Ultra-sensitive 7G operate point for detecting small magnetic fields
  • Micropower 15uA supply current extends battery life
  • Chopper stabilization eliminates switchpoint drift over temperature
  • Open-drain output for easy interfacing with various logic families
  • Internal bandgap regulator for stable operation across supply range
  • Tape and reel packaging (-T suffix)

Applications

  • Cell phone flip/slide detection
  • Battery-operated proximity sensing
  • Door and lid position detection
  • Consumer appliance reed switch replacement
  • Portable medical device cover sensing
Product Introduction: A3212ELHLT-T Product Introduction

The A3212ELHLT-T from Allegro MicroSystems is an ultra-sensitive, micropower, unipolar Hall-effect switch designed for battery-operated applications where power consumption and sensitivity are critical. The device features a very low operate point of 7G (typical), enabling detection of small magnetic fields from small or distant magnets. The micropower architecture draws only 15uA typical supply current, making it ideal for always-on battery-powered systems. Chopper stabilization circuitry dynamically cancels offset and temperature drift, ensuring consistent switchpoint performance over the -40°C to +85°C temperature range. The open-drain output can be pulled up to any voltage up to 24V, providing flexibility for interfacing with different logic families.

Working Principle: A3212ELHLT-T Working Principle

The A3212 uses a chopper-stabilized Hall plate architecture. The Hall element is periodically switched between two configurations, and the resulting output is synchronously demodulated to extract the magnetic field signal while canceling DC offset and 1/f noise. This dynamic offset cancellation technique eliminates the temperature-dependent drift that plagues conventional Hall sensors. When the applied magnetic flux density exceeds the operate point (BOP = 7G typical), the output transistor turns on (open-drain pulls low). When the field decreases below the release point (BRP = 5G typical), the output turns off. The 2G hysteresis prevents output chatter near the switching threshold. The device operates in a latched sample-and-sleep mode to achieve the 15uA supply current.

Pin Description: A3212ELHLT-T Pin Definition and Functions
Pin Name Function
1 VCC Supply voltage (2.4V-5.5V)
2 OUT Open-drain output – low when B > BOP
3 GND Ground
Application Scenarios: In which products and applications is A3212ELHLT-T used
  • Cell Phone Flip Detection: 7G sensitivity detects small magnet in phone shell; 15uA current allows always-on operation
  • Laptop Lid Sensor: Detects magnet in display lid for sleep/wake function
  • Smart Meter Tamper Detection: Senses magnetic field from external magnet used to tamper with meter
  • Reed Switch Replacement: Solid-state reliability with no contact bounce; lower power consumption
Alternative Models: What chips are recommended as replacements for A3212ELHLT-T
Model Manufacturer Key Difference
A3213ELHLT-T Allegro South-pole sensitive version
A1101ELHLT-T Allegro 35G BOP, higher sensitivity, 1.8mA supply
HAL502SF-A Micronas 2.5-24V, unipolar, SOT-23
TCS40DLR TDK South-pole, micropower, SOT-23-3
AH3213-Z-T Diodes Inc 2.4-5.5V, micropower, SOT-23

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1