Opens in a new tab

Home » Integrated Circuits ICs » 74HC595PW

74HC595PW

8-bit shift register with output latch, 100MHz shift, tri-state output, daisy-chain capable in TSSOP-16

6052

Effective Inventory

Image for reference only

Manufacturer Part:

74HC595PW

Package:

TSSOP-16 (5.00 x 4.40 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74HC595PW from Nexperia is an 8-bit shift register with output latch and tri-state output in a TSSOP-16 package. It converts serial data to parallel output, enabling microcontrollers to control many outputs using only three GPIO pins. The device supports shift frequencies up to 100MHz and daisy-chain cascading for unlimited output expansion.

Key Specifications

Logic Family 74HC
Supply Voltage Range 2.0V ~ 6.0V
Output Drive +/-7.8mA @ VCC=6V
Propagation Delay 13ns (Typical) @ VCC=6V
Shift Frequency 100MHz (Typical) @ VCC=6V
Serial Input 1 (DS)
Parallel Output 8 (Q0-Q7)
Serial Output 1 (Q7 prime)
Output Enable Yes (OE, active low)
Master Reset Yes (MR, active low)
Package TSSOP-16 (5.00 x 4.40mm)
Operating Temperature -40°C ~ +125°C

Features

  • 8-bit serial-in, parallel-out shift register with output latch
  • Separate clock inputs for shift register and output latch
  • Tri-state outputs for bus-oriented applications
  • Asynchronous master reset clears shift register
  • Serial output (Q7 prime) for daisy-chain cascading
  • Wide 2.0V to 6.0V supply range

Applications

  • LED matrix and display drivers
  • GPIO expansion for microcontrollers
  • Relay and solenoid multiplexing
  • Digital input multiplexing
  • Cascaded output expansion systems
Product Introduction: 74HC595PW Product Introduction

The 74HC595PW from Nexperia is an 8-bit serial-in, parallel-out shift register with output latches and tri-state outputs. It is one of the most widely used logic ICs for GPIO expansion, enabling a microcontroller to control 8 or more outputs using only three pins: serial data (DS), shift clock (SHCP), and latch clock (STCP). The device features separate shift register and output latch sections, allowing the shift register to be loaded while the output latch holds the previous data, preventing output glitches. The serial output (Q7 prime) enables unlimited daisy-chain cascading by connecting it to the DS input of the next device. The tri-state output enable (OE) allows the outputs to be disconnected from the bus, useful in multiplexed or shared-bus configurations.

Working Principle: 74HC595PW Working Principle

The 74HC595 consists of two main sections: an 8-bit shift register and an 8-bit output latch with tri-state buffers. Serial data is shifted into the shift register on the rising edge of the shift clock (SHCP). After 8 bits have been shifted in, the data is transferred to the output latch by a rising edge on the latch clock (STCP). The outputs (Q0-Q7) then reflect the latched data. The output enable (OE) controls the tri-state buffers; when OE is high, the outputs are high-impedance. The master reset (MR) asynchronously clears the shift register without affecting the output latch. The Q7 prime output provides the serial data output from the eighth stage of the shift register, which is used to cascade multiple 74HC595 devices. The latch clock and shift clock are independent, allowing data to be shifted in while the outputs remain stable.

Pin Description: 74HC595PW Pin Definition and Functions
Pin Name Function
1 Q1 Parallel output bit 1
2 Q2 Parallel output bit 2
3 Q3 Parallel output bit 3
4 Q4 Parallel output bit 4
5 Q5 Parallel output bit 5
6 Q6 Parallel output bit 6
7 Q7 Parallel output bit 7
8 GND Ground
9 Q7 prime Serial output for cascading
10 MR Master Reset (active low)
11 SHCP Shift register clock input
12 STCP Storage register clock (latch)
13 OE Output Enable (active low)
14 DS Serial data input
15 Q0 Parallel output bit 0
16 VCC Supply voltage (2.0V-6.0V)
Application Scenarios: In which products and applications is 74HC595PW used
  • LED Matrix Driver: 3 GPIO pins control 8 LEDs per chip; daisy-chain multiple 74HC595s to drive 64+ LED matrices from a single SPI bus
  • GPIO Expansion for MCU: Adds 8 digital outputs per chip using only 3 MCU pins; cascade for 16, 24, 32+ outputs
  • Relay Board Multiplexer: Controls 8 relay channels with tri-state output enabling hot-swap of relay modules
  • 7-Segment Display Multiplexing: Drives segment and digit selects for multiplexed 7-segment displays with minimal MCU resources
Alternative Models: What chips are recommended as replacements for 74HC595PW
Model Manufacturer Key Difference
74HC595D Nexperia Same, SOIC-16 package
SN74HC595DWR TI Same, SOIC-16, 2-6V
74HC595D Toshiba Same, SOIC-16, AEC-Q100
74HC165D Nexperia 8-bit parallel-in serial-out (input shift register)
74HC595D ST Same, SOIC-16

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1