Opens in a new tab

BTS716GXUMA1

Quad smart high-side switch, 4×2.6A, 140mΩ, PROFET 24V, AEC-Q100, SOIC-20, diagnostic feedback

3291

Effective Inventory

Image for reference only

Manufacturer Part:

BTS716GXUMA1

Package:

PG-DSO-20 (7.5 x 13.9 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTS716GXUMA1 from Infineon Technologies is a quad-channel smart high-side power switch in the Classic PROFET 24V family, housed in a PG-DSO-20 (SOIC-20) package. Each channel delivers up to 2.6 A nominal load current with 140 mΩ on-resistance, featuring integrated diagnostic feedback, overtemperature protection, and short-circuit protection qualified to AEC-Q100 for automotive and industrial applications.

Key Specifications

Number of Channels 4
Nominal Load Current per Channel 2.6 A (single), 3.3 A (dual), 4.7 A (quad parallel)
On-Resistance (per channel, 25°C) 110 mΩ (typ), 140 mΩ (max)
Supply Voltage Range 5.5 V to 40 V (overvoltage protection to 43 V)
Current Limit 6.5 A (min) per channel
Diagnostic Feedback Digital status flag (open drain)
Operating Temperature -40°C to +150°C (junction)
Qualification AEC-Q100

Features

  • Four independent high-side switches with CMOS-compatible inputs in a single package
  • Very low standby current for energy-efficient always-on applications
  • Integrated diagnostic feedback via open-drain status pins for fault detection
  • Fast demagnetization of inductive loads for relay and solenoid driving
  • Short-circuit, overtemperature, and overvoltage protection with auto-restart Stable behavior at undervoltage with separate logic and load ground

    Applications

    • Automotive body electronics and lighting control
    • Industrial automation relay and solenoid drivers
    • Resistive, inductive, and capacitive load switching
    • Replacement of electromechanical relays and discrete circuits
    • Truck and heavy-duty vehicle load management
Product Introduction: BTS716GXUMA1 Product Introduction

The BTS716GXUMA1 is a quad-channel smart high-side power switch from Infineon’s Classic PROFET 24V family, integrating four N-channel vertical power MOSFETs with charge pump, CMOS-compatible inputs, and diagnostic feedback in Smart SIPMOS technology. Each channel provides up to 2.6 A nominal load current with 110 mΩ typical on-resistance at 25°C. Channels can be paralleled for higher current capability (3.3 A dual, 4.7 A quad). The device features embedded protective functions including current limitation, overtemperature shutdown with auto-restart, overvoltage protection, and reverse battery protection. Two open-drain diagnostic status pins report fault conditions per channel pair. AEC-Q100 qualified and rated for junction temperatures up to 150°C.

Working Principle: BTS716GXUMA1 Working Principle

The BTS716GXUMA1 integrates four independent high-side power switches on two chips (channels 1-2 and 3-4). (1) Power Stage: Each channel uses an N-channel vertical power MOSFET driven by an internal charge pump that generates a gate voltage above the supply rail to fully enhance the MOSFET. The charge pump ensures low RDS(on) even at low supply voltages. (2) Protection Logic: Each channel incorporates overcurrent limiting (self-limited to approximately 9 A short-circuit current), overtemperature detection with hysteresis-based auto-restart, and overvoltage clamping for load dump protection up to 60 V. (3) Diagnostic Feedback: Two open-drain status pins (ST1/2 and ST3/4) pull low when a fault condition (overtemperature, short circuit, or open load) is detected on the corresponding channel pair, enabling microcontroller-based fault monitoring. (4) Input Logic: CMOS-compatible inputs activate each channel independently with separate logic ground (GND1/2, GND3/4) isolated from the load ground for improved noise immunity.

Pin Description: BTS716GXUMA1 Pin Definition and Functions
Pin Name Type Function
1 Vbb Power Positive supply voltage
2 GND1/2 Ground Ground for channel 1 and 2
3 IN1 Input Control input channel 1 (active high)
4 ST1/2 Output Diagnostic feedback channels 1/2 (open drain)
5 IN2 Input Control input channel 2 (active high)
6 GND3/4 Ground Ground for channel 3 and 4
7 IN3 Input Control input channel 3 (active high)
8 ST3/4 Output Diagnostic feedback channels 3/4 (open drain)
9 IN4 Input Control input channel 4 (active high)
10 Vbb Power Positive supply voltage
11-12 Vbb Power Positive supply voltage
13 OUT4 Output Protected high-side output channel 4
14 OUT3 Output Protected high-side output channel 3
15-16 Vbb Power Positive supply voltage
17 OUT2 Output Protected high-side output channel 2
18 OUT1 Output Protected high-side output channel 1
19-20 Vbb Power Positive supply voltage
Application Scenarios: In which products and applications is BTS716GXUMA1 used
  • Automotive body electronics controlling lamps, motors, and solenoids with diagnostic feedback
  • Industrial automation relay replacement with integrated protection and fault reporting
  • Truck and heavy-duty vehicle 24V load management with load dump protection
  • Capacitive load switching with high inrush current capability Heating and HVAC system actuator control in automotive and industrial environments
Alternative Models: What chips are recommended as replacements for BTS716GXUMA1
Manufacturer Part Number Package Notes
Infineon BTS716GB PG-DSO-20 Tube packaging variant
Infineon BTS7002-1EPP PG-DSO-8 Single channel, 4.5A PROFET
STMicroelectronics VN5E010AHTR-E SOIC-8 Single channel, 10mΩ, VIPower
onsemi NCV8402ADR2G SOIC-8 Dual channel, 500mA smart switch
Infineon BTS4140DK PG-DSO-8 Single channel, 1.4A PROFET

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1