Opens in a new tab

Home » Integrated Circuits ICs » 25LC256T-I/SN

25LC256T-I/SN

256Kbit SPI EEPROM, 32Kx8, 10MHz, 2.5-5.5V, SOIC-8, >1M cycles, >200yr retention

11200

Effective Inventory

Image for reference only

Manufacturer Part:

25LC256T-I/SN

Package:

SOIC-8 (4.90 x 3.91 x 1.58 mm, 200mil)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 25LC256T-I/SN from Microchip Technology is a 256-Kbit SPI serial EEPROM organized as 32K x 8 bits, operating from 2.5V to 5.5V with clock rates up to 10 MHz. Available in an SOIC-8 package, it supports SPI modes 0 and 3, features block write protection, and delivers over 1 million erase/write cycles with greater than 200-year data retention, making it ideal for reliable nonvolatile storage in industrial and consumer applications.

Key Specifications

Density 256 Kbit (32K x 8)
Interface SPI (Mode 0 and 3)
Max Clock Frequency 10 MHz
Supply Voltage 2.5 V to 5.5 V
Page Size 64 bytes
Write Cycle Time 5 ms (max)
Erase/Write Endurance > 1,000,000 cycles
Data Retention > 200 years
Operating Temperature -40C to +85C

Features

  • SPI-compatible serial interface (modes 0 and 3) for simple microcontroller connection
  • Block write protection: 1/4, 1/2, or entire array
  • Self-timed erase and write cycle with 5 ms max write time
  • Over 1 million erase/write cycle endurance
  • Greater than 200-year data retention
  • Hardware write protect pin (WP)
  • Low power CMOS technology with 5 uA max standby current

Applications

  • Industrial control parameter storage and calibration data
  • Consumer electronics configuration and user preference storage
  • Automotive system settings and fault logs
  • Medical device calibration and patient data storage
  • Networking equipment MAC address and configuration storage
Product Introduction: 25LC256T-I/SN Product Introduction

The 25LC256T-I/SN from Microchip Technology is a 256-Kbit SPI bus serial EEPROM organized as 32,768 x 8-bit, operating from 2.5V to 5.5V with clock frequencies up to 10 MHz. The device supports SPI modes 0 and 3, providing flexible interface compatibility with most microcontrollers. Page size is 64 bytes with self-timed erase and write operations completing in 5 ms maximum. The device features block write protection selectable for 1/4, 1/2, or the entire array, a hardware write protect pin (WP), and status register with write-in-progress and write-enable latch bits. Endurance exceeds 1 million erase/write cycles with data retention greater than 200 years.

Working Principle: 25LC256T-I/SN Working Principle

The 25LC256T-I/SN uses a standard SPI serial interface with four signal lines: CS (chip select), SCK (serial clock), SI (serial input), and SO (serial output). (1) Read Operation: The master asserts CS, sends the READ opcode (03h) followed by a 16-bit address, and the device shifts out data on SO starting from the addressed location. Sequential reads continue automatically incrementing the address. (2) Write Operation: Before writing, the WRITE ENABLE (WREN, 06h) opcode must be sent to set the write enable latch. Then the master sends the WRITE opcode (02h) with a 16-bit starting address and up to 64 bytes of data (one page). The device self-times the internal erase and write cycle, completing within 5 ms. The status register WIP bit indicates when the write is complete. (3) Write Protection: The WP pin protects the status register, while the BP0 and BP1 bits in the status register select the protected portion of the memory array.

Pin Description: 25LC256T-I/SN Pin Definition and Functions
Pin Name Type Function
1 CS Input Chip select (active low)
2 SO Output Serial data output (MISO)
3 WP Input Write protect pin (active low)
4 VSS Power Ground
5 SI Input Serial data input (MOSI)
6 SCK Input Serial clock input
7 HOLD Input Suspend serial communication (active low)
8 VCC Power Supply voltage (2.5-5.5V)
Application Scenarios: In which products and applications is 25LC256T-I/SN used
  • Industrial control parameter storage and calibration data retention exceeding 200 years
  • Consumer electronics configuration and user preference storage with SPI interface
  • Automotive system fault log and configuration storage with block write protection
  • Medical device calibration data with >1M cycle endurance for frequent updates
  • Networking equipment MAC address and serial number storage with write protect
Alternative Models: What chips are recommended as replacements for 25LC256T-I/SN
Manufacturer Part Number Package Notes
Microchip 25AA256T-I/SN SOIC-8 1.8V to 5.5V version
STMicroelectronics M95256-WMN6 SOIC-8 Pin-compatible, 2.5-5.5V
onsemi CAT25C256WI SOIC-8 Pin-compatible alternative
Rohm BR25H256FVM-W TSSOP-8 Smaller package option

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1