Opens in a new tab

BQ2057WSN

2-cell Li-Ion charger IC, 8.4V, +/-1%, 0.3V dropout, AutoComp, SOIC-8, -20 to +70C

3500

Effective Inventory

Image for reference only

Manufacturer Part:

BQ2057WSN

Package:

SOIC-8 (4.90 x 3.91 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ2057WSN from Texas Instruments is an advanced linear charge management IC for 2-cell Li-Ion and Li-Polymer batteries, providing 8.4V regulation with better than +/-1% accuracy. Featuring low dropout voltage (0.3V), AutoComp dynamic impedance compensation, and integrated temperature monitoring, it simplifies charger design for portable and embedded applications.

Key Specifications

Battery Chemistry Li-Ion / Li-Polymer
Cell Count 2 cells (8.4V)
Regulation Voltage 8.4V (+/-1%)
Dropout Voltage 0.3V (typical)
Charge Mode Linear
Current Sensing High-side or low-side programmable
AutoComp Yes (dynamic battery impedance compensation)
Temperature Monitor Optional (thermistor input)
Operating Temperature -20C to +70C

Features

  • Precision 8.4V regulation voltage with +/-1% accuracy for 2-cell Li-Ion/Li-Polymer
  • Low 0.3V dropout voltage minimizes power dissipation in linear charger
  • AutoComp dynamically compensates battery pack internal impedance for faster charging
  • Integrated conditioning, constant-current, and constant-voltage charge phases
  • Optional battery temperature monitoring via thermistor input
  • Three-state charge status output (charging, complete, temperature fault/sleep)
  • Automatic recharge when battery voltage drops below threshold

Applications

  • Portable medical equipment battery chargers
  • Emergency call and telematics systems
  • Handheld instruments and data terminals
  • Aftermarket battery charging accessories
  • Gaming and computer accessories
Product Introduction: BQ2057WSN Product Introduction

The BQ2057WSN from Texas Instruments is an advanced linear charge management IC for 2-cell Li-Ion and Li-Polymer battery packs, regulating to 8.4V with better than +/-1% accuracy. The low 0.3V dropout voltage minimizes power dissipation in the series pass element, simplifying thermal design. The proprietary AutoComp feature dynamically compensates for battery pack internal impedance, reducing charge time compared to conventional chargers. The device integrates three charge phases: conditioning for deeply discharged cells, constant-current fast charge, and constant-voltage taper charge with minimum current termination. Optional thermistor input enables battery temperature monitoring during charging. The three-state status output drives an LED or communicates with a host processor.

Working Principle: BQ2057WSN Working Principle

The BQ2057WSN implements a complete linear charging algorithm for 2-cell Li-Ion/Li-Polymer batteries. (1) Conditioning Phase: When a deeply discharged battery (below Vmin) is detected, the charger applies a low conditioning current (typically 1/10 of fast charge current) to safely raise the cell voltage. (2) Constant-Current Phase: Once the battery voltage rises above Vmin, the charger switches to constant-current fast charge at the programmed current level, set by an external sense resistor. (3) Constant-Voltage Phase: When the battery reaches 8.4V, the charger transitions to constant-voltage regulation, tapering the current as the battery approaches full charge. (4) Termination: Charging terminates when the current drops below the minimum current threshold. (5) AutoComp: During the constant-voltage phase, AutoComp dynamically adds a small voltage offset to compensate for the voltage drop across the battery pack internal impedance, effectively increasing the actual charge delivered. (6) Recharge: After termination, the device monitors battery voltage and automatically restarts charging when voltage drops below the recharge threshold.

Pin Description: BQ2057WSN Pin Definition and Functions
Pin Name Type Function
1 TS Input Temperature sense input (thermistor)
2 VCC Power Supply voltage input
3 SNS Input Current sense input
4 CC Output Charge control output (drives external PNP/FET)
5 COMP Output AutoComp output (compensation capacitor)
6 BAT Input Battery voltage sense input
7 STAT Output Charge status output (3-state: high/low/hi-Z)
8 VSS Ground Ground reference
Application Scenarios: In which products and applications is BQ2057WSN used
  • Portable medical equipment 2-cell Li-Ion battery chargers with temperature monitoring
  • Emergency call and telematics systems with automatic recharge capability
  • Handheld instruments and data terminals with AutoComp faster charging
  • Aftermarket battery charging accessories with low dropout linear design
Alternative Models: What chips are recommended as replacements for BQ2057WSN
Manufacturer Part Number Package Notes
TI BQ2057CDSG MSOP-8 Single-cell 4.2V version
TI BQ2057TSN SOIC-8 Single-cell 4.1V version
Microchip MCP73844 SOIC-8 2-cell Li-Ion charger
Analog Devices LTC4002-8.4 MSOP-10 2-cell linear charger

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1