Opens in a new tab

STM32L151RET6

Cortex-M3 MCU, 32MHz, 512KB Flash, 80KB SRAM, 290nA standby, 12-bit ADC/DAC, LQFP-64

7800

Effective Inventory

Image for reference only

Manufacturer Part:

STM32L151RET6

Package:

LQFP-64 (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32L151RET6 from STMicroelectronics is an ultra-low-power ARM Cortex-M3 MCU with 512KB Flash, 80KB SRAM, and rich peripheral set in a LQFP-64 package. Featuring multiple low-power modes down to 290nA, it delivers high performance at extremely low energy consumption for battery-operated and energy-harvesting applications.

Key Specifications

Core ARM Cortex-M3 @ 32 MHz
Flash 512 KB
SRAM 80 KB
Standby Current 290 nA (with RTC)
Stop Mode Current 0.5 uA (with RTC)
Run Current 245 uA/MHz
ADC 12-bit, 1 Msps, up to 24 channels
DAC 2x 12-bit
Operating Temperature -40C to +85C

Features

  • Ultra-low-power with 290nA standby and 0.5uA stop mode
  • 512KB Flash and 80KB SRAM for complex applications
  • 12-bit 1Msps ADC with up to 24 channels
  • Dual 12-bit DAC for analog output generation
  • Multiple communication interfaces: USART, SPI, I2C, USB
  • LCDC controller for direct LCD segment driving

Applications

  • Smart meters and energy harvesting systems
  • Wearable health monitoring devices
  • Industrial sensors and wireless nodes
  • Building automation and HVAC controllers
Product Introduction: STM32L151RET6 Product Introduction

The STM32L151RET6 from STMicroelectronics is an ultra-low-power ARM Cortex-M3 microcontroller operating at up to 32MHz with 512KB Flash and 80KB SRAM in a LQFP-64 package. The device features multiple low-power modes: Standby at 290nA (with RTC), Stop at 0.5uA (with RTC), Low-Power Run at 9uA, and Run at 245uA/MHz. Peripherals include a 12-bit 1Msps ADC with up to 24 channels, dual 12-bit DAC, up to 5 USARTs, 3 SPIs, 2 I2Cs, USB 2.0 full-speed, LCD controller for segment displays, and 2 comparators. The ultra-low-power architecture makes it ideal for battery-powered and energy-harvesting applications.

Working Principle: STM32L151RET6 Working Principle

The STM32L151RET6 uses ST’s ultra-low-power Cortex-M3 platform with multiple power domains. (1) CPU: The ARM Cortex-M3 core executes Thumb-2 instructions at up to 32MHz, providing 1.25 DMIPS/MHz performance. The NVIC supports up to 48 interrupts with 16 priority levels. (2) Power Management: Separate power domains for CPU, Flash, SRAM, and peripherals allow selective power-down. The voltage regulator supports 1.8V to 3.6V with an internal step-down converter. Low-power modes include Sleep (CPU stopped, peripherals running), Stop (all clocks stopped, SRAM retained, fast wakeup), and Standby (only RTC and backup registers retained, 290nA). (3) Analog: The 12-bit SAR ADC converts at 1Msps with hardware oversampling for improved resolution. Two 12-bit R-2R DACs generate analog waveforms. (4) LCD Controller: The built-in LCD controller drives up to 8×40 segments directly without external driver IC.

Pin Description: STM32L151RET6 Pin Definition and Functions
Pin Group Name Type Function
1-8 GPIO Port A I/O General-purpose I/O with alternate functions
9-16 GPIO Port B I/O General-purpose I/O with alternate functions
17-24 GPIO Port C/D I/O I/O and LCD segment/commodity pins
25 VDD Power Digital supply (1.8-3.6V)
26 VSS Ground Digital ground
27 VBAT Power Battery backup supply for RTC
28 NRST Input Reset (active low)
29-32 BOOT0/OSC I/O Boot selection and oscillator pins
Application Scenarios: In which products and applications is STM32L151RET6 used
  • Smart meters and energy harvesting with 290nA standby and LCD controller
  • Wearable health monitoring devices with 12-bit ADC for biosensors
  • Industrial wireless sensor nodes with ultra-low-power stop mode
  • Building automation HVAC controllers with dual DAC and multiple USARTs
Alternative Models: What chips are recommended as replacements for STM32L151RET6
Manufacturer Part Number Package Notes
ST STM32L152RET6 LQFP-64 Same with LCD controller enabled
ST STM32L073RZT6 LQFP-64 Cortex-M0+, lower power
Silicon Labs EFM32LG990F256 LQFP-64 Leopard Gecko, low power
NXP MKL27Z64VFT4 LQFP-48 Cortex-M0+, similar low-power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1