Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » MT25QL256ABA8ESF-0SIT

MT25QL256ABA8ESF-0SIT

256Mb SPI NOR Flash, Quad I/O, 133MHz, 1.8V, VDFPN-8, XIP capable

6375

Effective Inventory

Image for reference only

Manufacturer Part:

MT25QL256ABA8ESF-0SIT

Package:

VDFPN-8 (5.00 x 6.00 x 0.55 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT25QL256ABA8ESF-0SIT from Micron Technology is a 256Mb (32MB) SPI NOR Flash memory in a VDFPN-8 (5x6mm) package. Supporting Quad I/O SPI at up to 133MHz (equivalent 532Mbps), it provides fast code shadowing and data storage for embedded systems.

Key Specifications

Density 256 Mb (32 MB)
Interface SPI / Dual / Quad I/O
Max Clock 133 MHz (Quad I/O)
Effective Bandwidth 532 Mbps (Quad I/O)
Supply Voltage 1.7 V to 2.0 V
Endurance 100,000 erase cycles per sector
Data Retention 20 years
Operating Temperature -40C to +85C

Features

  • Quad I/O SPI for fast code execution (XIP)
  • 133MHz clock with double Data Rate option
  • 4KB sector and 64KB block erase
  • Advanced security: volatile and non-volatile lock bits
  • Uniform 256KB erase sectors with 4KB sub-sectors

Applications

  • Embedded system code storage and XIP execution
  • Industrial firmware and configuration storage
  • Automotive infotainment and ADAS maps
  • Network equipment boot firmware
Product Introduction: MT25QL256ABA8ESF-0SIT Product Introduction

The MT25QL256ABA8ESF-0SIT from Micron Technology is a 256Mb (32MB) 1.8V SPI NOR Flash memory in a VDFPN-8 (5x6mm) package. Supporting standard SPI, Dual I/O, and Quad I/O modes at up to 133MHz clock frequency, the device provides effective bandwidth up to 532Mbps for fast code shadowing and execute-in-place (XIP) operation. The memory is organized into 512 sectors of 64KB each, with 4KB sub-sector erase capability. Advanced security features include volatile and non-volatile protect bits, one-time programmable (OTP) area, and password protection. Endurance is 100,000 erase cycles per sector with 20-year data retention at 85C.

Working Principle: MT25QL256ABA8ESF-0SIT Working Principle

The MT25QL256ABA8ESF-0SIT uses Micron’s 45nm NOR Flash technology. (1) SPI Interface: The serial peripheral interface uses CS, CLK, DI, and DO pins. In Quad I/O mode, all four data pins become bidirectional I/O (IO0-IO3), quadrupling the data transfer rate. (2) Command Protocol: The host sends an 8-bit command byte followed by 24-bit address and optional mode bits. In Quad mode, address and data are transferred on all four pins simultaneously. (3) XIP: Execute-in-place mode allows the MCU to directly execute code from the Flash without first copying to RAM, using the fast Quad I/O read with continuous read mode bits that eliminate command overhead on sequential accesses. (4) Erase: Supports 4KB sub-sector, 32KB half-block, 64KB block, and full-chip erase. Typical sector erase time is 200ms. (5) Program: 256-byte page program in 0.8ms typical.

Pin Description: MT25QL256ABA8ESF-0SIT Pin Definition and Functions
Pin Name Type Function
1 S/CS Input Chip select (active low)
2 D1/IO1 I/O Data in / IO1 (Dual/Quad)
3 D2/IO2 I/O Write protect / IO2 (Quad)
4 VSS Ground Ground
5 D3/IO3 I/O Hold / IO3 (Quad)
6 C/CLK Input Serial clock
7 D0/IO0 I/O Data out / IO0 (Dual/Quad)
8 VDD Power Supply (1.7-2.0V)
Application Scenarios: In which products and applications is MT25QL256ABA8ESF-0SIT used
  • Embedded system code storage with XIP execution at 532Mbps Quad I/O
  • Industrial firmware and configuration storage with 100K cycle endurance
  • Automotive infotainment map and firmware storage at 1.8V
  • Network equipment boot firmware with fast random access NOR architecture
Alternative Models: What chips are recommended as replacements for MT25QL256ABA8ESF-0SIT
Manufacturer Part Number Package Notes
Micron MT25QU256ABA8E VDFPN-8 3.0V version
Macronix MX25L25635FM2I-08G SOP-16 256Mb, 3V, similar spec
Winbond W25Q256JVEIQ VQFP-8 256Mb, 1.8V, similar
Infineon S25FL256LAGMFI01 SOIC-16 256Mb, 3V, similar

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1